
Alloying Bronze (Cu + Sn) — The Bronze Age Begins
Leiðbeiningar
Prerequisite: Smelting Copper
Prerequisite: Smelting Copper
You need copper ingots — the base metal for bronze alloy.

Forsenduteikning
Smelting Copper from Malachite — The Birth of Metallurgy
Efni fyrir þetta skref:
Nauðsynleg verkfæri:
Kiln (from Blueprint 02)
Bellows
Crucible tongs
Casting mold
Anvil
Ball peen hammerPrerequisite: Casting Copper Tools
Prerequisite: Casting Copper Tools
You need casting technique from this blueprint to shape bronze.

Forsenduteikning
Casting Copper Tools — Shaping the First Metal
Efni fyrir þetta skref:
Tin (smelted or purchased)100 g
Lost Wax Casting Kit1 kitPrerequisite: Extracting Tin
Prerequisite: Extracting Tin
You need tin — the critical alloying element. Tin was the strategic resource of the Bronze Age.

Forsenduteikning
Extracting Tin from Cassiterite — The Missing Ingredient
Efni fyrir þetta skref:
Tin (smelted or purchased)100 g
Lost Wax Casting Kit1 kitMetallurgy of Bronze
Metallurgy of Bronze
Why Bronze is Superior
Bronze is a solid solution alloy — tin atoms dissolve into the copper crystal lattice, distorting it and blocking dislocation movement. Result:
| Property | Copper | Bronze (10% Sn) | Improvement |
|---|---|---|---|
| Vickers Hardness | 40-50 | 70-150 | 2-3× harder |
| Tensile Strength | 210 MPa | 300-500 MPa | 2× stronger |
| Melting Point | 1085°C | ~950°C | Easier to melt! |
| Castability | Poor (gassy) | Excellent (fluid) | Complex shapes |
| Corrosion | Forms green patina | Highly resistant | Lasts millennia |
The Ideal Ratio
Ancient smiths converged on ~10% tin, 90% copper through trial and error:
- <8% tin: Too soft, barely better than copper
- 10-12% tin: Optimal hardness, good castability, golden colour
- 15-20% tin: Very hard but brittle — good for bells and mirrors, bad for tools
- >20% tin: Extremely brittle, shatters on impact
Efni fyrir þetta skref:
Tin (smelted or purchased)100 g
Lost Wax Casting Kit1 kitThe Alloying Process
The Alloying Process
Preparation
- Weigh your metals: 900g copper + 100g tin for classic 10% bronze.
- Cut copper into small pieces (1-2cm) for faster melting.
- Tin can be in any form — it melts so fast it dissolves almost instantly.
Melting Sequence (CRITICAL)
- Melt the copper first. Load copper into pre-heated crucible in the kiln. Bring to full liquid (1085°C+).
- Add tin LAST. When copper is fully molten, add tin to the surface. Tin melts instantly (232°C) and dissolves into the copper.
- Stir with a pre-heated dry stick or ceramic rod. Ensure uniform mixing — 10 seconds of stirring is enough.
- NEVER add copper to molten tin — the temperature differential causes violent boiling and spatter.
Signs of Good Bronze
- Surface should be bright and mirror-like when fully liquid
- Colour: golden-yellow (not coppery red = too little tin, not silvery = too much tin)
- Flows smoothly when poured — bronze is more fluid than pure copper
Pour
- Skim slag from surface.
- Pour into pre-heated mold in one continuous stream.
- Bronze has excellent castability — it fills fine details that pure copper cannot.
Efni fyrir þetta skref:
Crucible1 pc
Tin (smelted or purchased)100 g
Lost Wax Casting Kit1 kit
Aluminum Bronze C954 (Reference)1 referenceFinishing and the Innovation Leap
Finishing and the Innovation Leap
Post-Casting
- Allow to cool naturally in the mold.
- Remove from mold, break off sprues.
- Cold-work the edges: bronze work-hardens even more effectively than copper.
- Grind and polish the working edge.
Testing Your Bronze
- Ring test: Strike with a stick — good bronze produces a clear, bell-like ring. Dull thud = bad alloy or porosity.
- Edge test: A bronze axe keeps its edge 3-5× longer than copper.
- Colour: Golden-yellow when polished. Develops green patina over time (same as the Statue of Liberty).
The Civilization Impact
Bronze changed everything:
- Agriculture: Bronze ploughshares broke harder soil → more food → larger populations
- Warfare: Bronze swords and armour dominated for 2,000 years
- Art: Bronze casting enabled the first complex sculptures (lost-wax casting)
- Trade: Tin scarcity created the first long-distance trade networks
But bronze has a fatal flaw: tin scarcity. When the Bronze Age trade networks collapsed (~1200 BCE), civilizations that couldn't get tin were forced to master a harder, more abundant metal — iron. See Blueprint 08: Building a Bloomery & Smelting Iron.
Efni fyrir þetta skref:
Lost Wax Casting Kit1 kit
Tin (smelted or purchased)100 g
Crucible1 pc
Aluminum Bronze C954 (Reference)1 referenceEfni
6- 1 pieceStaðgengill
- Staðgengill
- 1 referenceStaðgengill
Efni úr tengdum teikningum
You might also need
Materials makers commonly use alongside this build.
CC0 opinbert ríki
Þessi teikning er gefin út undir CC0. Þér er frjálst að afrita, breyta, dreifa og nota þetta verk í hvaða tilgangi sem er, án þess að biðja um leyfi.
Studdu smiðinn með því að kaupa vörur í gegnum teikningu hans þar sem hann fær þóknun smiða sem seljendur ákvarða, eða búðu til nýja endurskoðun á þessari teikningu og tengdu hana sem tengingu í þinni eigin teikningu til að deila tekjum.







