LIST
FEGURÐ OG VELLÍÐAN
HANDVERK
MENNING OG SAGA
SKEMMTUN
UMHVERFI
MATUR OG DRYKKUR
ÖFUGVERKFRÆÐI
VÍSINDI
ÍÞRÓTTIR
TÆKNI
KLÆÐANLEG TÆKNI
Linen Fabric Woven in Plain Weave on a Treadle Loom
Tex

Búin til af

Tex

14. október 2026FO
10
0
0
0
0

Linen Fabric Woven in Plain Weave on a Treadle Loom

Linen is cloth woven from flax fibre: very strong, absorbent, quick to dry and cool to the touch, and among the oldest textiles; Egyptian mummies were wrapped in it. Weave linen thread in plain weave on the treadle loom, each weft over one warp thread and under the next. The picture: linen cloths in a textile museum drawer.
Miðlungs
A week

Leiðbeiningar

1

Warp the loom

Measure the warp (step 5), thread the ends alternately through the two shafts' heddles and through the reed, and wind it on the back beam under even tension. Mist the warp with water now and then; dry linen frays (ours).

Efni fyrir þetta skref:

LíntvinniLíntvinni1560 m

Nauðsynleg verkfæri:

Fótstiginn vefstóllFótstiginn vefstóll
ReglustikaReglustika
SkæriSkæri
VatnsúðabrúsiVatnsúðabrúsi
VatnVatn
2

Weave

Press one treadle, throw the shuttle through the shed, beat with the reed; press the other treadle and throw it back. Lay each pick in at a slant so the edges do not draw in.

Efni fyrir þetta skref:

LíntvinniLíntvinni1320 m

Nauðsynleg verkfæri:

Fótstiginn vefstóllFótstiginn vefstóll
VefskyttaVefskytta
3

Advance

Wind the woven cloth onto the front beam as you go, keeping the beat even so the picks per cm stay the same.

Nauðsynleg verkfæri:

Fótstiginn vefstóllFótstiginn vefstóll
ReglustikaReglustika
4

Cut off

Weave to the end of the warp, cut the cloth off and knot the warp ends in groups so the weft cannot unravel.

Nauðsynleg verkfæri:

SkæriSkæri
5

Thread for the cloth

Hleð Jupyter-vinnubók…

Efni

1

Nauðsynleg verkfæri

6

Þessi teikning býr til

CC0 opinbert ríki

Þessi teikning er gefin út undir CC0. Þér er frjálst að afrita, breyta, dreifa og nota þetta verk í hvaða tilgangi sem er, án þess að biðja um leyfi.

Studdu smiðinn með því að kaupa vörur í gegnum teikningu hans þar sem hann fær þóknun smiða sem seljendur ákvarða, eða búðu til nýja endurskoðun á þessari teikningu og tengdu hana sem tengingu í þinni eigin teikningu til að deila tekjum.

Umræða

(0)

Skrá inn til að taka þátt í umræðunni

Hleður athugasemdum...