LIST
FEGURÐ OG VELLÍÐAN
HANDVERK
MENNING OG SAGA
SKEMMTUN
UMHVERFI
MATUR OG DRYKKUR
ÖFUGVERKFRÆÐI
VÍSINDI
ÍÞRÓTTIR
TÆKNI
KLÆÐANLEG TÆKNI

Terephthalic Acid: Para-Xylene Oxidised by Air with Manganese and Bromide
Terephthalic acid is the acid half of PET. Both methyl groups of para-xylene are burnt to acid groups by air under pressure in hot acetic acid, with a little manganese salt and bromide as catalyst: the Mid-Century process of Saffer and Barker (US 2,833,816, 1958). The acid does not dissolve, so it is simply filtered off. Example 24 of the patent, all parts by weight.
The picture: our diagram of the reactor.
Lengra kominn
1 day
Leiðbeiningar
1
1
Charge the reactor
Charge the reactor
Into a corrosion-resistant pressure reactor with a water-cooled condenser on top, put 75 parts para-xylene, 150 parts acetic acid, 1 part manganese acetate (tetrahydrate) and 0.75 part ammonium bromide.
Efni fyrir þetta skref:
Para-xýlen75 partsNauðsynleg verkfæri:
Ediksýra (ísedik)
Mangan asetat
Ammóníum brómíð
Skálavog
Þrýstihvarfaker
Eimsvalaspírall
Hlífðargleraugu gegn efnaslettum
Efnaþolnir hanskar2
2
Pressurise with air and heat to 385 °F
Pressurise with air and heat to 385 °F
Raise the pressure to 400 psig with air, blown in near the bottom. Set the vent so gas leaves at 3,000 volumes per hour per volume of liquid. Heat to 385 °F (196 °C), then switch the heat off: the reaction heats itself.
Nauðsynleg verkfæri:
Þrýstihvarfaker
Iðnaðarloftþjappa
Eimsvalaspírall
Rannsóknastofuhitamælir3
3
Hold at 385–400 °F
Hold at 385–400 °F
Once the first rush is over, heat as needed to hold 385–400 °F (196–204 °C), 1.5 hours in all. It is finished when the exit gas is back to 20–21 % oxygen (Orsat analysis).
Nauðsynleg verkfæri:
Þrýstihvarfaker
Rannsóknastofuhitamælir
Orsat gasgreinir4
4
Cool, empty and filter
Cool, empty and filter
Cool to 185 °F (85 °C) and let the pressure off. Push the liquid out at 150–200 °F with nitrogen pressure, scrape out the solid, and filter everything together.
Nauðsynleg verkfæri:
Köfnunarefnishylki
Glertrekt með stút
Síupappír
Efnaþolnir hanskar5
5
Wash and dry
Wash and dry
Wash the terephthalic acid twice with hot acetic acid (75 ml each in the example) and dry it. The patent got 115 parts by weight from 100 of para-xylene.
Nauðsynleg verkfæri:
Ediksýra (ísedik)
Glertrekt með stút
Síupappír
ÞurrkofnEfni
1- 75 partsStaðgengill
Nauðsynleg verkfæri
15- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
- Staðgengill
Þessi teikning býr til
Tengd Blueprint
Þessi blueprint deila þekkingu — tækni, efni eða meginreglur
CC0 opinbert ríki
Þessi teikning er gefin út undir CC0. Þér er frjálst að afrita, breyta, dreifa og nota þetta verk í hvaða tilgangi sem er, án þess að biðja um leyfi.
Studdu smiðinn með því að kaupa vörur í gegnum teikningu hans þar sem hann fær þóknun smiða sem seljendur ákvarða, eða búðu til nýja endurskoðun á þessari teikningu og tengdu hana sem tengingu í þinni eigin teikningu til að deila tekjum.

