LIST
FEGURÐ OG VELLÍÐAN
HANDVERK
MENNING OG SAGA
SKEMMTUN
UMHVERFI
MATUR OG DRYKKUR
ÖFUGVERKFRÆÐI
VÍSINDI
ÍÞRÓTTIR
TÆKNI
KLÆÐANLEG TÆKNI
The Spring-Button Lemon Squeezer: A Button That Gives Way So the Rind Wraps Round It
YourGrandma

Búin til af

YourGrandma

30. september 2026IS
7
0
0
0
0

The Spring-Button Lemon Squeezer: A Button That Gives Way So the Rind Wraps Round It

A flat squeezer presses only the middle of the lemon's cut face, and the rind at its edge keeps its juice. John Klepzig of San Francisco, California, received US 84,125, dated 17 November 1868, for "forming an opening in one of the squeezing-levers. A movable button, which is operated by a spiral spring, is placed in the opening, and, by placing the fruit between the two levers, and closing them, the juice is expressed, through the hole in the bottom, into the tumbler, while the rind of the lemon is pressed closely against the face of the button-lever, completely enclosing the button." A projection on the other lever pushes the fruit down onto the button. This rung works out the lever's force and the spring's share, with a work check, then makes the levers in hardwood with a sprung, grooved button and a hollow stem, and squeezes lemons over a tumbler.
Miðlungs
About 4 hours

Leiðbeiningar

1

Lever and spring

Hleð Jupyter-vinnubók…
2

A hinged squeezer before it

The embedded blueprint squeezes the lemon between two cups on crossed handles. Klepzig uses two hinged levers and lets a sprung button give way under the fruit.
3

Read US 84,125

"A and B are the two levers, connected by a hinge, C. The lever A has a projection, D, so that when the two levers are shut together, the small end of the button E, which sets in the openings in the lever B, is forced out." "The segregated half of the fruit is placed against the spring-button, and the opposite lever, having the projection, is brought down upon the small end, which presses the rind down upon the smooth surface of the button-lever, completely surrounding the button, and bearing down the spring, which forces out the stem, while the juice of the fruit passes through the centre hole, H, into the tumbler. The face of the button is concave and has grooves centring to the opening."
4

Make the levers and squeeze lemons

**Levers.** Cut two 25 cm levers from hardwood board, shaped like Klepzig's with handles at one end, and join the other ends with a butt hinge as C. **Button seat.** Drill a 45 mm stepped hole through lever B, 7 cm from the hinge, narrower at the back to leave a ledge. **Button.** Turn or rasp a hardwood button that slides in the hole, with a concave face carved with grooves running to a centre hole, and fix a short length of tube through its centre as the stem G, passing through the narrow back of the hole. Put a compression spring round the stem, resting on the ledge. **Projection.** Glue a rounded hardwood knob to lever A opposite the button as the projection D. **Test.** Seal the wood with food-safe oil. Hold the squeezer over a tumbler, lay a half lemon cut face down on the button, close the levers and press. Weigh the juice against a half squeezed on a flat board.

Efni fyrir þetta skref:

HarðviðarborðHarðviðarborð1 stykki
HarðviðarkubburHarðviðarkubbur2 stykki
HurðarlömHurðarlöm1 stykki
TréskrúfurTréskrúfur6 stykki
ÁlrörÁlrör0.05 metri
ÞrýstigormasettÞrýstigormasett1 stykki
TrélímTrélím1 stykki
SítrónaSítróna2 stykki

Nauðsynleg verkfæri:

HandsögHandsög
HleðsluborHleðslubor
BorasettBorasett
Stangajárnasett fyrir tréStangajárnasett fyrir tré
RaspRasp
SandpappírSandpappír
SkrúfjárnasettSkrúfjárnasett
EldhúshnífurEldhúshnífur
Stafræn eldhúsvogStafræn eldhúsvog
DrykkjarglasDrykkjarglas
5

A button that sticks, leaks or does not wrap the rind

Spring-button lemon squeezer troubleshooting.

Flow

Loading...
6

History and honest limits

**John Klepzig** of San Francisco, California, received US 84,125, dated 17 November 1868. The opening in lever B was smaller at the back than at the face, leaving a ledge on which the spiral spring F rested, and the small end or tube G attached to the button passed through the lesser hole. His claim is the movable button with its opening and spiral spring, with the two levers. **Honest limits.** Hardwood levers, a carved button and a bought spring stand in for his made-up parts. The notebook ignores friction; its forces, lengths and spring are examples. Your juice weights are the result.

Efni

8

Nauðsynleg verkfæri

10

CC0 opinbert ríki

Þessi teikning er gefin út undir CC0. Þér er frjálst að afrita, breyta, dreifa og nota þetta verk í hvaða tilgangi sem er, án þess að biðja um leyfi.

Studdu smiðinn með því að kaupa vörur í gegnum teikningu hans þar sem hann fær þóknun smiða sem seljendur ákvarða, eða búðu til nýja endurskoðun á þessari teikningu og tengdu hana sem tengingu í þinni eigin teikningu til að deila tekjum.

Umræða

(0)

Skrá inn til að taka þátt í umræðunni

Hleður athugasemdum...