ARTE
BELLEZZA E BENESSERE
MESTIERE
CULTURA E STORIA
DIVERTIMENTO
AMBIENTE
CIBO E BEVANDE
INGEGNERIA INVERSA
SCIENZE
SPORT
TECNOLOGIA
INDOSSABILI
Retrofocus Wide-Angle Lens
Clay

Creato da

Clay

22. settembre 2026DK
0
0
0
0
0

Retrofocus Wide-Angle Lens

Reflex cameras put a mirror between the lens and the film, and a conventional wide-angle lens needs to sit closer to the film than the mirror allows. Pierre Angénieux in Paris reversed the telephoto idea: a diverging group in front, a converging group well behind it, so the lens's focus lies further back than its focal length. **US 2,649,022**, "Wide-angle photographic objective lens assembly", Angénieux, filed 29. July 1950, granted 18. August 1953, describes an objective whose "distance along the axis between the back surface of the last lens and the focal plane … is relatively very large with respect to the focal length". (His US 2,649,021 of the same day is a different lens - a large-aperture projection objective.) **You build one on the bench**, measure its back focus against its focal length, and fit a mirror in the room it leaves.
Principiante
90 minutes

Istruzioni

1

Two lenses, reversed

Front: concave about -50 mm, facing the scene. Rear: convex about 50 mm, 60 mm behind it. Aim out of a window.

Materiali per questo passaggio:

Lente concavaLente concava1 pezzo
Set di lenti convesseSet di lenti convesse1 set

Strumenti necessari:

Banco e guida otticaBanco e guida ottica
Set di portalentiSet di portalenti
2

Find the focus

Move a tracing-paper screen until the distant scene is sharp. Measure rear lens to screen: the back focus. Measure the height of one far feature on the screen.

Materiali per questo passaggio:

Rotolo di carta da lucido per cartamodelliRotolo di carta da lucido per cartamodelli1 foglio
Nastro di carta per mascheratureNastro di carta per mascherature1 rotolo

Strumenti necessari:

Riga in acciaioRiga in acciaio
3

Compare one lens

Remove the concave lens. The +50 mm lens alone focuses about 50 mm behind itself; measure the same feature's height.

Strumenti necessari:

Riga in acciaioRiga in acciaio
4

Fit the mirror

Put the concave lens back. Stand a small mirror at 45 degrees between the rear lens and the screen position and turn the screen to catch the image from the side - a reflex viewfinder. With the single lens there is no room.

Materiali per questo passaggio:

Specchio pianoSpecchio piano1 pezzo
5

Back focus vs focal length

Caricamento del notebook Jupyter…
6

History & Context

**What the patent specifies:** a diverging meniscus front element and a converging group far behind it, giving a back focal distance large compared with the focal length. **Modern build (derived):** two stock lenses and a mirror. Angénieux sold it as the Retrofocus; nearly every SLR wide-angle since uses the layout. Its limits: the asymmetry brings barrel distortion, and the big front element makes the lens larger and heavier than a symmetric design.
Passo 6 - Image 1

Materiali

5

Strumenti richiesti

3

Blueprint correlati

Questi blueprint condividono conoscenze — tecniche, materiali o principi

CC0 Pubblico dominio

Questo progetto è rilasciato sotto CC0. Sei libero di copiare, modificare, distribuire e utilizzare quest'opera per qualsiasi scopo, senza chiedere permesso.

Supporta il Maker acquistando prodotti tramite il suo progetto dove guadagna una Commissione Maker stabilita dai venditori, oppure crea una nuova iterazione di questo progetto e includilo come collegamento nel tuo progetto per condividere i ricavi.

Commenti

(0)

Accedi per partecipare alla discussione

Caricamento commenti...