ARTE
BELLEZZA E BENESSERE
MESTIERE
CULTURA E STORIA
DIVERTIMENTO
AMBIENTE
CIBO E BEVANDE
INGEGNERIA INVERSA
SCIENZE
SPORT
TECNOLOGIA
INDOSSABILI
Condenser Worm: Copper Tube Coiled in a Water Tub
Forge

Creato da

Forge

14. ottobre 2026NO
20
0
0
0
0

Condenser Worm: Copper Tube Coiled in a Water Tub

A still's vapour becomes liquid again in the worm: a copper tube coiled in a tub of cold water. Ure (1839) describes copper stills with a capital and worm, and retorts piped to a worm-tub. Fill copper tube with dry sand so it bends without kinking, wind it round a wooden drum with a steady fall, and set it in a tub with the outlet through the side near the bottom. The picture: our diagram, the worm in its tub, vapour in at the top and liquid out at the bottom.
Intermedio
A day

Istruzioni

1

Fill the tube

Cork one end of the copper tube, fill it with dry sand tamped down, and cork the other end.

Materiali per questo passaggio:

Tubo di rameTubo di rame8 m
SabbiaSabbia2 kg
Tappi di sugheroTappi di sughero2 pezzi

Strumenti necessari:

Mazzuolo di legnoMazzuolo di legno
2

Wind the coil

Saw a log into a drum about 30 cm across (our size). Anneal the tube in the fire if it is stiff, then wind it slowly round the drum, letting each turn fall about 5 cm, so the liquid always runs downhill.

Materiali per questo passaggio:

Tronchi di latifoglia (rovere, acero, faggio)Tronchi di latifoglia (rovere, acero, faggio)1 pezzo

Strumenti necessari:

Sega a manoSega a mano
Forgia da fabbroForgia da fabbro
Guanti resistenti al caloreGuanti resistenti al calore
3

Empty the sand

Slide the coil off the drum, pull the corks and shake and wash out all the sand.

Materiali per questo passaggio:

AcquaAcqua5 litri

Strumenti necessari:

SecchioSecchio
4

Set it in the tub

Drill the tub near its bottom for the outlet, pass the lower end out through it and seal the hole with a cork and tallow. Fill the tub with cold water; renew the water as it warms.

Materiali per questo passaggio:

Tappi di sugheroTappi di sughero1 pezzo
Grasso animale (sego)Grasso animale (sego)0.05 kg
AcquaAcqua100 litri

Strumenti necessari:

TinoTino
Trapano a manoTrapano a mano
5

Tube for the coil

Caricamento del notebook Jupyter…

Materiali

6

Strumenti richiesti

7

CC0 Pubblico dominio

Questo progetto è rilasciato sotto CC0. Sei libero di copiare, modificare, distribuire e utilizzare quest'opera per qualsiasi scopo, senza chiedere permesso.

Supporta il Maker acquistando prodotti tramite il suo progetto dove guadagna una Commissione Maker stabilita dai venditori, oppure crea una nuova iterazione di questo progetto e includilo come collegamento nel tuo progetto per condividere i ricavi.

Commenti

(0)

Accedi per partecipare alla discussione

Caricamento commenti...