ARTE
BELLEZZA E BENESSERE
MESTIERE
CULTURA E STORIA
DIVERTIMENTO
AMBIENTE
CIBO E BEVANDE
INGEGNERIA INVERSA
SCIENZE
SPORT
TECNOLOGIA
INDOSSABILI
An Internal Ring Gear Cut by the Fellows Cutter: Teeth on the Inside
A 60-tooth internal ring gear whose teeth were made the way Edwin R. Fellows's gear-shaping machine (US 579,708, 1897) makes them. The same cutter that made the 40-tooth external gear was rolled inside a ring blank, and every position of the cutter was cut away.
Fellows counted this among his machine's advantages: one cutter cuts internal teeth as well as external ones. The flanks came out as true internal involutes. The tooth count, rim and face width are stated choices; the patent gives no dimensions.
Principiante
Several hours of printing; the slicer reports the exact time
Istruzioni
1
1
One cutter, inside and out
One cutter, inside and out
Fellows's specification: "The same cutter will cut either external or internal gear-teeth with equal ease and correctness. This is an important advantage, it being very difficult to cut internal gears correctly by any of the gear-cutting machines now in use." To make this model, the published 24-tooth cutter was rolled one full turn inside a ring blank in 3,600 positions, and each position was subtracted. Inside a ring, the cutter and the blank turn the same way.
2
2
The model in 3D
The model in 3D
Spin the ring in the viewer and look at the teeth on its inside. The cutter generated them, and no one drew them. It was built in FreeCAD and saved as one joined .blend mesh, editable in free Blender.
Strumenti necessari:
Computer da tavolo3
3
Print it
Print it
Lay it flat on one face. It needs no supports, but the bed must be at least 180 mm across. PLA is fine for a display model. Because of the interference stated above, it is not a working ring for the 40-tooth gear as drawn.
Materiali per questo passaggio:
Filamento PLA - nero1 kitStrumenti necessari:
Stampante 3DMateriali
1- 1 kitSegnaposto
Strumenti richiesti
2- Segnaposto
- Segnaposto
File di progetto
1Materiali dei progetti collegati
Blueprint correlati
Questi blueprint condividono conoscenze — tecniche, materiali o principi
CC0 Pubblico dominio
Questo progetto è rilasciato sotto CC0. Sei libero di copiare, modificare, distribuire e utilizzare quest'opera per qualsiasi scopo, senza chiedere permesso.
Supporta il Maker acquistando prodotti tramite il suo progetto dove guadagna una Commissione Maker stabilita dai venditori, oppure crea una nuova iterazione di questo progetto e includilo come collegamento nel tuo progetto per condividere i ricavi.