ARTE
BELLEZZA E BENESSERE
MESTIERE
CULTURA E STORIA
DIVERTIMENTO
AMBIENTE
CIBO E BEVANDE
INGEGNERIA INVERSA
SCIENZE
SPORT
TECNOLOGIA
INDOSSABILI
Machete to a Relief Specification
Forge

Creato da

Forge

11. ottobre 2026NO
19
0
0
0
0

Machete to a Relief Specification

Machete blades are typically 30–66 cm long and under 3 mm thick. The Red Cross and Red Crescent emergency catalogue sets out what a sound one must be: a 55 cm machete with a 2.5 mm blade of hot-forged carbon steel, 0.6–0.65 % carbon and 0.6–0.8 % manganese, hardened and tempered to 45–50 Rockwell C near the edge, the whole blade hardened but the tang left normalised past the first rivet hole. The wooden handle is keyed into three grooves in the tang and held by three steel rivets with washers.
Avanzato
Factory process

Istruzioni

1

Forge the blade

Hot-forge the carbon steel to the blade shape, 2.5 mm thick, with three grooves along the tang for the handle.

Materiali per questo passaggio:

Billetta di acciaio ad alto carbonioBilletta di acciaio ad alto carbonio1 pezzo

Strumenti necessari:

Forgia da fabbroForgia da fabbro
Maglio a cammeMaglio a camme
2

Harden and temper

Harden and temper the whole blade to 45–50 HRC near the edge, leaving the tang normalised beyond the first rivet hole.

Strumenti necessari:

Forgia da fabbroForgia da fabbro
Durometro RockwellDurometro Rockwell
3

Fit the handle

Fit the wooden handle into the grooves and fix it with three steel rivets and washers.

Materiali per questo passaggio:

Listello di legno duro per maniciListello di legno duro per manici1 pezzo
Rivetti in acciaioRivetti in acciaio3 pezzi
Rondella pianaRondella piana3 pezzi
4

Check

Check the edge for dents and the hardness near the edge.

Strumenti necessari:

Durometro RockwellDurometro Rockwell

Materiali

4

Strumenti richiesti

3

Questo progetto realizza

CC0 Pubblico dominio

Questo progetto è rilasciato sotto CC0. Sei libero di copiare, modificare, distribuire e utilizzare quest'opera per qualsiasi scopo, senza chiedere permesso.

Supporta il Maker acquistando prodotti tramite il suo progetto dove guadagna una Commissione Maker stabilita dai venditori, oppure crea una nuova iterazione di questo progetto e includilo come collegamento nel tuo progetto per condividere i ricavi.

Commenti

(0)

Accedi per partecipare alla discussione

Caricamento commenti...