ARTE
BELLEZZA E BENESSERE
MESTIERE
CULTURA E STORIA
DIVERTIMENTO
AMBIENTE
CIBO E BEVANDE
INGEGNERIA INVERSA
SCIENZE
SPORT
TECNOLOGIA
INDOSSABILI
Opacity and Tinting Strength: Why Some Colours Go Ten Times Further
Mary

Creato da

Mary

24. settembre 2026FI
41
0
0
0
0

Opacity and Tinting Strength: Why Some Colours Go Ten Times Further

Two paints of the same colour can behave completely differently in a mixture: one overwhelms everything it touches, the other disappears. That is TINTING STRENGTH, and it is not the same thing as opacity. OPACITY is how well a paint hides what is underneath it. It comes from the difference in refractive index between the pigment particles and the binder around them — the bigger that difference, the more light is scattered and the less gets through. Which explains something that puzzles everyone at first: a pigment can be intensely coloured and nearly transparent, or pale and completely opaque. Ultramarine and titanium white are opposite extremes of exactly this, and knowing which you have is what makes glazing and mixing predictable.
Intermedio
3 hours

Istruzioni

1

Refractive index is what makes a pigment opaque

Caricamento del notebook Jupyter…

Materiali per questo passaggio:

Set di pigmenti minerali in polvereSet di pigmenti minerali in polvere1 pezzo
Olio di linoOlio di lino1 pezzo

Strumenti necessari:

Computer da tavoloComputer da tavolo
Macinello di vetroMacinello di vetro
Lente da orologiaioLente da orologiaio
2

Make a transparency chart and keep it

Draw a thick black line across a white card, then paint a band of every colour you own across it, in one consistent thickness. Where the line shows through, that paint is transparent. Label each band and keep the card. It answers, instantly and for your actual paints, the question that decides whether a colour can be glazed, whether it will cover an underpainting, and how it will behave in a mixture. Do it again for any new brand. Two tubes labelled the same colour from different makers can differ enormously in pigment load and therefore in both opacity and tinting strength — the label names the pigment, not the formulation.

Materiali per questo passaggio:

Set di pigmenti minerali in polvereSet di pigmenti minerali in polvere1 pezzo
Olio di linoOlio di lino1 pezzo

Strumenti necessari:

Set di pennelli da artistaSet di pennelli da artista
RighelloRighello
3

Glazing and scumbling use the two ends of the range

A GLAZE is a transparent dark colour over a lighter layer. Light passes through it, reflects off the layer beneath and comes back through — so the colour is produced by light that has travelled through the paint twice, which gives a depth no opaque mixture reproduces. A SCUMBLE is the opposite: a thin, broken, semi-opaque light colour dragged over a darker one. The result is optical rather than mixed, and it is how skies and flesh have been painted for four hundred years. Both fail with the wrong pigment. A glaze in titanium white is a pale opaque smear; a scumble in ultramarine disappears. Choosing the pigment for its optical behaviour, rather than only its hue, is what makes either technique work.

Materiali per questo passaggio:

Set di pigmenti minerali in polvereSet di pigmenti minerali in polvere1 pezzo
Olio di linoOlio di lino1 pezzo

Strumenti necessari:

Set di pennelli da artistaSet di pennelli da artista
Lente da orologiaioLente da orologiaio
RighelloRighello
4

Particle size changes both, and it changes with grinding

Scattering is strongest when the particles are roughly half the wavelength of light — around 0.2 to 0.3 micrometres. Larger or smaller and a pigment scatters less, so opacity has an optimum rather than rising forever with fineness. Which means grinding a pigment finer does not simply make it better. Natural ultramarine ground too fine becomes pale and grey, and the traditional coarse grind is not laziness — it is where the colour is. It also means two jars of the 'same' pigment can behave differently because they were milled differently. That is a real variable, it is invisible on the label, and it is one more reason to test what you actually have rather than what the name promises.

Materiali per questo passaggio:

Set di pigmenti minerali in polvereSet di pigmenti minerali in polvere1 pezzo

Strumenti necessari:

Macinello di vetroMacinello di vetro
Lente da orologiaioLente da orologiaio

Materiali

2

Strumenti richiesti

5

CC0 Pubblico dominio

Questo progetto è rilasciato sotto CC0. Sei libero di copiare, modificare, distribuire e utilizzare quest'opera per qualsiasi scopo, senza chiedere permesso.

Supporta il Maker acquistando prodotti tramite il suo progetto dove guadagna una Commissione Maker stabilita dai venditori, oppure crea una nuova iterazione di questo progetto e includilo come collegamento nel tuo progetto per condividere i ricavi.

Commenti

(0)

Accedi per partecipare alla discussione

Caricamento commenti...