ARTE
BELLEZZA E BENESSERE
MESTIERE
CULTURA E STORIA
DIVERTIMENTO
AMBIENTE
CIBO E BEVANDE
INGEGNERIA INVERSA
SCIENZE
SPORT
TECNOLOGIA
INDOSSABILI
Sand Bath in a Sunk Iron Pan
Forge

Creato da

Forge

14. ottobre 2026NO
16
0
0
0
0

Sand Bath in a Sunk Iron Pan

A sand bath is a pan of sand set over the heat. A flask or dish bedded in the sand is warmed on all sides, not just on the bottom. Alchemists already used it. Here a shallow pan is hammered from iron sheet into a hollow and then filled with sieved sand. The picture: our diagram of a flask bedded in sand in an iron pan over a fire.
Principiante
A day

Istruzioni

1

Cut the disc

Scribe a circle on the iron sheet with the dividers and cut it out with the snips. File the edge smooth.

Materiali per questo passaggio:

Lamiera di ferro (battuta)Lamiera di ferro (battuta)1 pezzo

Strumenti necessari:

Compasso a punte fisseCompasso a punte fisse
Cesoie da lattoniereCesoie da lattoniere
Lima per metalliLima per metalli
Guanti da saldatoreGuanti da saldatore
2

Carve a hollow

Gouge a shallow round hollow into the end grain of a hardwood block, about as deep as the pan will be.

Strumenti necessari:

Blocco di legno duroBlocco di legno duro
Sgorbia da legnoSgorbia da legno
Mazzuolo di legnoMazzuolo di legno
3

Sink the pan

Hold the disc over the hollow and hammer it down in rings from the rim toward the centre, turning it as you go. Sinking stretches and thins the sheet, so go evenly. If the iron stiffens, heat it red in the forge and let it cool before going on.

Strumenti necessari:

Blocco di legno duroBlocco di legno duro
Martello a penna sfericaMartello a penna sferica
Forgia da fabbroForgia da fabbro
Tenaglie da fabbroTenaglie da fabbro
Guanti da saldatoreGuanti da saldatore
4

Flatten the bottom

Planish the bottom flat on the anvil so the pan sits steady over the fire, and file the rim level.

Strumenti necessari:

IncudineIncudine
Martello a penna sfericaMartello a penna sferica
Lima per metalliLima per metalli
5

Fill with sand

Sieve the sand, dry it by heating it in the pan, and leave a layer about 3 cm deep.

Materiali per questo passaggio:

SabbiaSabbia2 kg

Strumenti necessari:

VaglioVaglio
Forgia da fabbroForgia da fabbro
6

Use it

Set the pan over the heat and bed the flask or dish partly in the sand. The sand carries the heat to all sides of the vessel.

Strumenti necessari:

Guanti da saldatoreGuanti da saldatore
7

How big a disc

Caricamento del notebook Jupyter…

Materiali

2

Strumenti richiesti

12

Blueprint correlati

Questi blueprint condividono conoscenze — tecniche, materiali o principi

CC0 Pubblico dominio

Questo progetto è rilasciato sotto CC0. Sei libero di copiare, modificare, distribuire e utilizzare quest'opera per qualsiasi scopo, senza chiedere permesso.

Supporta il Maker acquistando prodotti tramite il suo progetto dove guadagna una Commissione Maker stabilita dai venditori, oppure crea una nuova iterazione di questo progetto e includilo come collegamento nel tuo progetto per condividere i ricavi.

Commenti

(0)

Accedi per partecipare alla discussione

Caricamento commenti...