ARTE
BELLEZZA E BENESSERE
MESTIERE
CULTURA E STORIA
DIVERTIMENTO
AMBIENTE
CIBO E BEVANDE
INGEGNERIA INVERSA
SCIENZE
SPORT
TECNOLOGIA
INDOSSABILI

Sodium Bicarbonate: Soda Crystals Exposed to Carbonic Acid in Chambers (the Old Process)
Before the ammonia-soda works, baking soda was made by simply letting carbonic acid gas soak into soda crystals, as Thorpe's Dictionary (1913) describes. The crystals stand in layers on a lath false bottom; the gas comes in below, nine of the crystals' ten molecules of water drain away as mother liquor, carrying the impurities with it, and after 6 to 9 days the crystals have turned into loose, damp bicarbonate in their own shape. It is dried at no more than 45 °C.
The picture: our diagram.
Principiante
3 weeks
Istruzioni
1
1
Stack soda crystals on the lath bottom
Stack soda crystals on the lath bottom
Put ordinary soda crystals (yellow or inferior ones do as well) in regular layers on a false bottom of laths in a closed chamber (preferably iron), leaving space below for the drainage.
Materiali per questo passaggio:
Soda in cristalli1 as requiredStrumenti necessari:
Camera di gasaggio con falso fondo di listelli
Guanti di gomma2
2
Pass in carbonic acid for 6 to 9 days
Pass in carbonic acid for 6 to 9 days
Lead carbonic acid gas in below the false bottom; it is usually made from calcium carbonate and hydrochloric acid (ours: whiting in a gas generator). The mother liquor drains off through a U-tube in the chamber bottom. The process is finished when this flow stops, generally in 6 to 9 days.
Materiali per questo passaggio:
Carbonato di calcio (bianco di Spagna)1 as required
Acido cloridrico1 as requiredStrumenti necessari:
Gasogeno
Camera di gasaggio con falso fondo di listelli
Occhiali antispruzzo chimico
Guanti di gomma3
3
Dry at no more than 45 °C
Dry at no more than 45 °C
Open the chamber: the bicarbonate keeps the shape of the crystals but is a loose, very damp powder. Dry it in a stove at no more than 45 °C; this generally takes 8 to 10 days. Ours: a drying oven.
Strumenti necessari:
Essiccatoio
Termometro da laboratorioMateriali
3- 1 as requiredSegnaposto
- 1 as requiredSegnaposto
- 1 as requiredSegnaposto
Strumenti richiesti
6- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
- Segnaposto
Questo progetto realizza
Blueprint correlati
Questi blueprint condividono conoscenze — tecniche, materiali o principi
CC0 Pubblico dominio
Questo progetto è rilasciato sotto CC0. Sei libero di copiare, modificare, distribuire e utilizzare quest'opera per qualsiasi scopo, senza chiedere permesso.
Supporta il Maker acquistando prodotti tramite il suo progetto dove guadagna una Commissione Maker stabilita dai venditori, oppure crea una nuova iterazione di questo progetto e includilo come collegamento nel tuo progetto per condividere i ricavi.


