ARTE
BELLEZZA E BENESSERE
MESTIERE
CULTURA E STORIA
DIVERTIMENTO
AMBIENTE
CIBO E BEVANDE
FUTURO VERDE
INGEGNERIA INVERSA
SCIENZE
SPORT
TECNOLOGIA
INDOSSABILI
Building a Lyre of Ur — The Sumerian Bull Lyre
Woody

Creato da

Woody

3. luglio 2026NO
0
0
0
0
0

Building a Lyre of Ur — The Sumerian Bull Lyre

Build a large Sumerian yoke lyre in the style of the 4,500-year-old Lyre of Ur, the oldest stringed instrument ever found. Strings run from a deep soundbox up to a crossbar held between two arms, each plucked open. A serious maker build in the yoke lyre and how one string sounds one note.
Intermedio
Several hours over a few sessions

Istruzioni

1

The oldest strings on Earth

The lyres from the Royal Cemetery of Ur (about 2500 BC) are the oldest stringed instruments ever found — deep soundboxes crowned with a golden bull's head, their strings plucked one note at a time.
2

Build the soundbox

Build a hollow wooden soundbox, broad and deep — the Ur lyre was large and full-voiced, much bigger than a Greek lyre.

Materiali per questo passaggio:

Dry Softwood BoardDry Softwood Board1 pezzo
PVA Wood GluePVA Wood Glue1 pezzo

Strumenti necessari:

HacksawHacksaw
3

Fit the soundboard

Glue a thin soundboard over the top to seal the chamber, and cut a soundhole so the built-up sound can escape.

Materiali per questo passaggio:

PVA Wood GluePVA Wood Glue1 pezzo

Strumenti necessari:

Sloyd Carving KnifeSloyd Carving Knife
4

Raise the two arms

Fix two stout wooden arms rising up from the soundbox, leaning slightly outward like the horns of a bull.

Materiali per questo passaggio:

Dowel RodDowel Rod1 pezzo
PVA Wood GluePVA Wood Glue1 pezzo
5

Fit the yoke

Lay a crossbar — the yoke — between the tops of the two arms. The strings will hang from this bar down to the soundbox.

Materiali per questo passaggio:

Dowel RodDowel Rod1 pezzo
6

Add a bull's head

Carve or model a bull's head for the front of the soundbox — the emblem of the Ur lyres, whose deep tone echoed the bull's bellow.

Strumenti necessari:

Sloyd Carving KnifeSloyd Carving Knife
7

String it to the yoke

Anchor eight to eleven strings at the soundbox, run each up to the yoke, and wrap it around the bar with a leather strip so it can be tuned by twisting.

Materiali per questo passaggio:

Steel Music Wire 0.032"Steel Music Wire 0.032"1 pezzo
8

Tune the strings

Twist each string's wrap around the yoke to tune it — tighter for a higher note — setting the strings to the notes of a scale, lowest to highest.
9

Play it

Pluck the open strings with your fingers or a plectrum. Because each string is a fixed note, you play a lyre by choosing which strings to sound.
10

Compendium — the yoke lyre

A lyre is a yoke instrument: its strings run from the soundbox up to a crossbar (the yoke) held between two arms, and each string is tuned to its own note and plucked open. Unlike the fretted langspil or a guitar, a lyre has no way to shorten a string as you play, so it needs one string per note — which is why lyres have many strings. The soundbox amplifies them exactly as in every stringed instrument: the thin strings shake the light soundboard, which drives the air in the box out through the soundhole. The lyres of Ur, from about 2500 BC, are the oldest stringed instruments ever found — buried in the Royal Cemetery with gold, lapis lazuli and a bull's head whose deep voice the instrument's tone was meant to echo. They were tuned by wrapping each string around the yoke with a strip of leather or a tuning rod and twisting it. The Greek lyre and kithara are direct descendants of this Near-Eastern design, and the same string-and-soundbox idea, given a fretted neck, grows into the lute and the guitar. String pitch obeys the same three rules as the musical bow: tension, length and mass.

Materiali

4

Strumenti richiesti

2

You can swap these in

Can't get one of the materials? Swap it for an equivalent — these work just as well.

Blueprint correlati

Questi blueprint condividono conoscenze — tecniche, materiali o principi

CC0 Pubblico dominio

Questo progetto è rilasciato sotto CC0. Sei libero di copiare, modificare, distribuire e utilizzare quest'opera per qualsiasi scopo, senza chiedere permesso.

Supporta il Maker acquistando prodotti tramite il suo progetto dove guadagna una Commissione Maker stabilita dai venditori, oppure crea una nuova iterazione di questo progetto e includilo come collegamento nel tuo progetto per condividere i ricavi.

Commenti

(0)

Accedi per partecipare alla discussione

Caricamento commenti...