ARTE
BELLEZZA E BENESSERE
MESTIERE
CULTURA E STORIA
DIVERTIMENTO
AMBIENTE
CIBO E BEVANDE
INGEGNERIA INVERSA
SCIENZE
SPORT
TECNOLOGIA
INDOSSABILI
Terephthalic Acid: Para-Xylene Oxidised by Air with Manganese and Bromide
Charlie

Creato da

Charlie

19. ottobre 2026DE
0
0
0
0
0

Terephthalic Acid: Para-Xylene Oxidised by Air with Manganese and Bromide

Terephthalic acid is the acid half of PET. Both methyl groups of para-xylene are burnt to acid groups by air under pressure in hot acetic acid, with a little manganese salt and bromide as catalyst: the Mid-Century process of Saffer and Barker (US 2,833,816, 1958). The acid does not dissolve, so it is simply filtered off. Example 24 of the patent, all parts by weight. The picture: our diagram of the reactor.
Avanzato
1 day

Istruzioni

1

Charge the reactor

Into a corrosion-resistant pressure reactor with a water-cooled condenser on top, put 75 parts para-xylene, 150 parts acetic acid, 1 part manganese acetate (tetrahydrate) and 0.75 part ammonium bromide.

Materiali per questo passaggio:

Para-xilenePara-xilene75 parts

Strumenti necessari:

Acido acetico (glaciale)Acido acetico (glaciale)
Acetato di manganeseAcetato di manganese
Bromuro di ammonioBromuro di ammonio
Bilancia a bracciBilancia a bracci
Reattore a pressioneReattore a pressione
Serpentina del condensatoreSerpentina del condensatore
Occhiali antispruzzo chimicoOcchiali antispruzzo chimico
Guanti resistenti agli agenti chimiciGuanti resistenti agli agenti chimici
2

Pressurise with air and heat to 385 °F

Raise the pressure to 400 psig with air, blown in near the bottom. Set the vent so gas leaves at 3,000 volumes per hour per volume of liquid. Heat to 385 °F (196 °C), then switch the heat off: the reaction heats itself.

Strumenti necessari:

Reattore a pressioneReattore a pressione
Compressore d'aria industrialeCompressore d'aria industriale
Serpentina del condensatoreSerpentina del condensatore
Termometro da laboratorioTermometro da laboratorio
3

Hold at 385–400 °F

Once the first rush is over, heat as needed to hold 385–400 °F (196–204 °C), 1.5 hours in all. It is finished when the exit gas is back to 20–21 % oxygen (Orsat analysis).

Strumenti necessari:

Reattore a pressioneReattore a pressione
Termometro da laboratorioTermometro da laboratorio
Analizzatore di gas OrsatAnalizzatore di gas Orsat
4

Cool, empty and filter

Cool to 185 °F (85 °C) and let the pressure off. Push the liquid out at 150–200 °F with nitrogen pressure, scrape out the solid, and filter everything together.

Strumenti necessari:

Bombola di azotoBombola di azoto
Imbuto di vetro con gamboImbuto di vetro con gambo
Carta da filtroCarta da filtro
Guanti resistenti agli agenti chimiciGuanti resistenti agli agenti chimici
5

Wash and dry

Wash the terephthalic acid twice with hot acetic acid (75 ml each in the example) and dry it. The patent got 115 parts by weight from 100 of para-xylene.

Strumenti necessari:

Acido acetico (glaciale)Acido acetico (glaciale)
Imbuto di vetro con gamboImbuto di vetro con gambo
Carta da filtroCarta da filtro
EssiccatoioEssiccatoio

Materiali

1

Strumenti richiesti

15

Questo progetto realizza

Blueprint correlati

Questi blueprint condividono conoscenze — tecniche, materiali o principi

CC0 Pubblico dominio

Questo progetto è rilasciato sotto CC0. Sei libero di copiare, modificare, distribuire e utilizzare quest'opera per qualsiasi scopo, senza chiedere permesso.

Supporta il Maker acquistando prodotti tramite il suo progetto dove guadagna una Commissione Maker stabilita dai venditori, oppure crea una nuova iterazione di questo progetto e includilo come collegamento nel tuo progetto per condividere i ricavi.

Commenti

(0)

Accedi per partecipare alla discussione

Caricamento commenti...