ARTE
BELLEZZA E BENESSERE
MESTIERE
CULTURA E STORIA
DIVERTIMENTO
AMBIENTE
CIBO E BEVANDE
INGEGNERIA INVERSA
SCIENZE
SPORT
TECNOLOGIA
INDOSSABILI
Timber Beams Hewn Square from the Log
Woody

Creato da

Woody

14. ottobre 2026NO
17
0
0
0
0

Timber Beams Hewn Square from the Log

Before sawmills, beams for frames and machines were hewn square from the log with axes. Snap a chalk line, score notches down to it, knock out the wood between them (juggling), then hew the face smooth to the line with a broadaxe. Turn the log and do each side. The picture: shipwrights with broadaxes hewing timbers for a ship, about 1915–1920 (Bain News Service, Library of Congress).
Intermedio
A day per beam

Istruzioni

1

Set the log up and mark

Block the log off the ground so it cannot roll. Mark the beam's outline on both ends with the square and snap chalk lines along the log between them.

Materiali per questo passaggio:

TroncoTronco1 pezzo

Strumenti necessari:

Squadra fissaSquadra fissa
Filo tracciatoreFilo tracciatore
2

Score

Stand on the log and chop notches every 30 cm or so, almost down to the line.

Strumenti necessari:

AsciaAscia
Casco da cantiereCasco da cantiere
3

Juggle

Knock off the blocks of wood between the notches with the axe, leaving a rough face just short of the line.

Strumenti necessari:

AsciaAscia
4

Hew to the line

Hew the face smooth to the chalk line with the broadaxe, working from the bottom of the stem upward.

Strumenti necessari:

Scure da squadraturaScure da squadratura
5

Turn and repeat

Roll the log a quarter turn, snap new lines from the end marks, and hew the next face. Check the corners with the square; dress any high spots with the adze.

Strumenti necessari:

Filo tracciatoreFilo tracciatore
Squadra fissaSquadra fissa
Ascia a sgorbiaAscia a sgorbia
6

The biggest beam in a log

Caricamento del notebook Jupyter…

Materiali

1
  • 1 pezzo
    Segnaposto

Strumenti richiesti

6

CC0 Pubblico dominio

Questo progetto è rilasciato sotto CC0. Sei libero di copiare, modificare, distribuire e utilizzare quest'opera per qualsiasi scopo, senza chiedere permesso.

Supporta il Maker acquistando prodotti tramite il suo progetto dove guadagna una Commissione Maker stabilita dai venditori, oppure crea una nuova iterazione di questo progetto e includilo come collegamento nel tuo progetto per condividere i ricavi.

Commenti

(0)

Accedi per partecipare alla discussione

Caricamento commenti...