ARTE
BELLEZZA E BENESSERE
MESTIERE
CULTURA E STORIA
DIVERTIMENTO
AMBIENTE
CIBO E BEVANDE
INGEGNERIA INVERSA
SCIENZE
SPORT
TECNOLOGIA
INDOSSABILI
Sorting Table: Oak Plank Top on Two Trestles
Woody

Creato da

Woody

14. ottobre 2026NO
21
0
0
0
0

Sorting Table: Oak Plank Top on Two Trestles

The trestle table, boards laid over two trestles, was the commonest Western table until the 16th century. It makes a plain sorting table: a wide, flat top to spread samples on, that comes apart for storage. Batten oak planks into a top, and make two four-legged trestles with splayed legs. The picture: a plank table on four-legged trestles in the kitchen of the Château de Beynac.
Principiante
Two days

Istruzioni

1

Make the top

Plane oak planks straight on their edges, lay them side by side to about 180 × 80 cm (our size), and nail battens across underneath near each end, set in so they sit just inside the trestles.

Materiali per questo passaggio:

Tavola di legno duroTavola di legno duro4 pezzi
Chiodi di ferroChiodi di ferro24 pezzi

Strumenti necessari:

Sega a manoSega a mano
Pialla a manoPialla a mano
Riga di riscontroRiga di riscontro
Martello a penna trasversaleMartello a penna trasversale
2

Trestle beams

Cut two beams as long as the top is wide. Mark and chop four splayed mortises in the underside of each, near the ends.

Materiali per questo passaggio:

Travi di legnoTravi di legno1 pezzo

Strumenti necessari:

Sega a manoSega a mano
GraffiettoGraffietto
Scalpello da mortaseScalpello da mortase
Mazzuolo da intaglioMazzuolo da intaglio
3

Legs

Shave eight legs, tenon their tops to the mortises, and drive them in with glue-free wedges so they splay outward (step 5).

Materiali per questo passaggio:

Tavola di legno duroTavola di legno duro1 pezzo

Strumenti necessari:

Coltello a due maniciColtello a due manici
Sega a manoSega a mano
Mazzuolo da intaglioMazzuolo da intaglio
Trapano a manoTrapano a mano
4

Set it up

Stand the trestles apart, lay the top on them with the battens inside the beams, and saw the leg ends so it stands level.

Strumenti necessari:

Sega a manoSega a mano
Riga di riscontroRiga di riscontro
5

Leg splay

Caricamento del notebook Jupyter…

Materiali

3

Strumenti richiesti

9

Questo progetto realizza

Blueprint correlati

Questi blueprint condividono conoscenze — tecniche, materiali o principi

CC0 Pubblico dominio

Questo progetto è rilasciato sotto CC0. Sei libero di copiare, modificare, distribuire e utilizzare quest'opera per qualsiasi scopo, senza chiedere permesso.

Supporta il Maker acquistando prodotti tramite il suo progetto dove guadagna una Commissione Maker stabilita dai venditori, oppure crea una nuova iterazione di questo progetto e includilo come collegamento nel tuo progetto per condividere i ricavi.

Commenti

(0)

Accedi per partecipare alla discussione

Caricamento commenti...