アート
美容とウェルネス
工芸
文化と歴史
エンターテインメント
環境
食品と飲料
リバースエンジニアリング
科学
スポーツ
テクノロジー
ウェアラブル
Centrifugal and Centripetal Churn Dasher: Paired Blades That Squeeze the Cream Through
Robbins wrote that in all other churns butter gathers round the dasher and clogs it, so churning stops "before the cream has parted with all the butter it contains."
Z. C. Robbins of St. Louis, Missouri, received US 7,006, dated 8 January 1850, for what he called the "Centrifugal and Centripetal Churn-Dasher": broad outer blades on the ends of the arms with their inner faces at right angles to the radii, and inner blades whose outer edges lie on the circle of motion a short distance behind the outer blades' after edges, passing obliquely forward under them. Turned, the cream is forced between each pair; reversed, the inner blades gather the butter "into a roll in the center of the dasher." It followed his telegraph churn of June 1849.
This rung works out the squeeze, then prints the dasher in one piece, fits it in a box, and makes butter.
中級者
About 3 hours, plus printing
手順
1
1
The squeeze
The squeeze
Jupyter ノートブックを読み込み中…
2
2
His first dasher
His first dasher
The embedded blueprint is Robbins's 1849 telegraph churn. Six months later he paired its blades so they squeeze the cream between them.
3
3
Read US 7,006
Read US 7,006
"When the dasher is rotated in cream, the cream will be gathered between the diverging surfaces of each pair of blades, and by the joint action of pressure and suction, be forced therefrom through the narrow space between their after edges."
4
4
Print the dasher
Print the dasher
Print the dasher on end in one piece with supports: four tangential outer blades and four oblique inner blades between two crosses. Print the crank arm. Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.
このステップの材料:
PETGフィラメント1 個必要な工具:
FDM 3D プリンター5
5
Print the dasher
6
6
Print the crank arm
7
7
Shaft
Shaft
Push a 10 mm square hardwood shaft through the dasher's hubs and glue it centred.
このステップの材料:
堅木のダボ1 個
木工用接着剤1 個必要な工具:
手のこぎり
紙やすり8
8
The box
The box
Take a food-safe box about 190 mm each way. Drill both ends on the axis 90 mm up, round the shaft where it runs, pass it through, and glue the crank arm and a dowel handle on. He held it could run uncovered.
このステップの材料:
食品級の保存容器1 個木工用接着剤1 個必要な工具:
コードレスドリル
ドリルビットセット9
9
The patent drawing
The patent drawing
US 7,006 drawing sheet, public domain (expired patent).
10
10
Crank, then reverse into a roll
Crank, then reverse into a roll
Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 1.5 litres. Crank steadily, outer blades leading; as soon as the butter begins to separate, reverse the crank, as he said, so the inner blades gather it into a roll in the centre. Pour off the buttermilk, add cold water, churn a little and pour off again until it runs clear; work in a pinch of salt and weigh the butter.
このステップの材料:
生クリーム1500 ml
粗い海塩1 個
水1 個必要な工具:
差しっぱなしのプローブ温度計
ストップウォッチ
デジタルキッチンスケール
ステンレス鋼の大きな混ぜ鉢11
11
Butter that clogs, or will not roll
Butter that clogs, or will not roll
Centrifugal-centripetal dasher troubleshooting.
Flow
Loading...
12
12
History and honest limits
History and honest limits
**Z. C. Robbins** of St. Louis, Missouri, received US 7,006, dated 8 January 1850. He wrote that dairy-women would favour no churn whose surfaces could not all be reached for cleansing, and that his would make more butter, faster and with less power, than any churn ever patented; that is his claim, not our measurement. He claimed the outer blades tangential to their circle combined with the inclined inner blades.
**Honest limits.** A food-safe box and a printed dasher stand in for his. FDM prints hold food in their layer lines, so wash well and replace when worn. Your times and weights are the result.
材料
7- 1 個プレースホルダー
- 1 個プレースホルダー
- 2 個プレースホルダー
- 1 個プレースホルダー
- 1500 mlプレースホルダー
- 1 個プレースホルダー
- 1 個プレースホルダー
必要な工具
9- プレースホルダー
- プレースホルダー
- プレースホルダー
- 1 vendor sell this, none ship to you yetプレースホルダー
- プレースホルダー
- プレースホルダー
- プレースホルダー
- プレースホルダー
- プレースホルダー
設計ファイル
2この設計図で作るもの
関連ブループリント
これらのブループリントは知識を共有しています — 技術、材料、原理
CC0 パブリックドメイン
このブループリントはCC0で公開されています。許可を求めずに、自由にコピー、修正、配布、あらゆる目的で使用できます。
メイカーを応援するには、ブループリント経由で製品を購入してください。メイカーには メイカーコミッション がベンダーにより設定されています。または、このブループリントの新しいイテレーションを作成し、自分のブループリントにコネクションとして含めて収益を共有できます。