コラボレーション
アート
美容とウェルネス
工芸
文化と歴史
エンターテインメント
環境
食品と飲料
リバースエンジニアリング
科学
スポーツ
テクノロジー
ウェアラブル

Clay Tool Set: Potter's Turning Tools, Turning Stick and Rib (Binns, The Potter's Craft, 1910)
The potter's set for turning (trimming) leather-hard pots on the wheel, as Binns taught it: soft steel tools the potter bends and files to shape, a turning stick and upright board to steady the hand, and wooden ribs cut to the shape of the inside of a pot.
Result: a set of turning tools, a turning stick and board, and ribs.
Source: C. F. Binns, The Potter's Craft (1910), pp. 86-88 and 179. Unknown: the tool sizes. Picture: Fig. 19 of the book.
初心者
Unknown
手順
1
1
Bend and file the turning tools
Bend and file the turning tools
Make the turning tools of soft steel strip: bend each near its end and file the edge to suit. Make broad tools filed to a curve, for finishing concave surfaces; one or two narrow tools with a curved edge, which cut faster; and a small square tool. Keep the filing at its own bench so steel dust does not get into the clay. Ours: mild steel flat bar. Not given: the strip sizes.
このステップの材料:
軟鋼平鋼1 turning tools必要な工具:
金切りのこ(ハクソー)
ハンマー
金床
金工ヤスリ2
2
Make the board and turning stick
Make the board and turning stick
Cut a soft pine board 8 or 10 inches wide and 2 feet high, to stand upright at the back of the wheel frame opposite the potter, screwed on or set in a socket so it can be removed. Make the turning stick from a broomstick with a sharpened nail in its end; its point presses into the board at any height and the hand holding the tool rests on it, like a painter's mahl-stick. Ours: a wooden dowel for the broomstick.
このステップの材料:
松板1 board support
木ダボ1 turning stick
鉄釘1 stick point必要な工具:
金切りのこ(ハクソー)
金工ヤスリ
ハンマー3
3
Cut the ribs
Cut the ribs
Cut a piece of wood, called a rib, to the exact shape of the inside of the pot to be made; it smooths the inside while the wheel turns. Make one for each shape. Ours: hardwood.
このステップの材料:
堅木の厚板1 ribs必要な工具:
金切りのこ(ハクソー)
金工ヤスリ材料
5- 1 turning toolsプレースホルダー
- 1 board supportプレースホルダー
- 1 turning stickプレースホルダー
- 1 stick pointプレースホルダー
- 1 ribsプレースホルダー
接続ブループリントの材料
この設計図で作るもの
CC0 パブリックドメイン
このブループリントはCC0で公開されています。許可を求めずに、自由にコピー、修正、配布、あらゆる目的で使用できます。
メイカーを応援するには、ブループリント経由で製品を購入してください。メイカーには メイカーコミッション がベンダーにより設定されています。または、このブループリントの新しいイテレーションを作成し、自分のブループリントにコネクションとして含めて収益を共有できます。




