コラボレーション
アート
美容とウェルネス
工芸
文化と歴史
エンターテインメント
環境
食品と飲料
リバースエンジニアリング
科学
スポーツ
テクノロジー
ウェアラブル
Forge-Welded Plough and Trace Chain: Links Bent, Scarfed and Welded One into the Next, with S-Hooks and a Swivel (Edwinson, 1886)
Forge

作成者

Forge

14. 11月 2026NO
6
0
0
0
0

Forge-Welded Plough and Trace Chain: Links Bent, Scarfed and Welded One into the Next, with S-Hooks and a Swivel (Edwinson, 1886)

How a country smith made and mended farm chain, from George Edwinson's series in Amateur Work (1886): rod cut to link length plus one-third, bent hot, scarfed and forge-welded shut through the previous link; tough S-hooks for field repairs and a forged swivel link with its pin.
中級者
A few minutes per link

手順

1

His rules

Jupyter ノートブックを読み込み中…
2

Read Edwinson

"Measure the length of a link in the chain, add one-third to this, and the total will give the required length of iron for an oval link."
3

Cut the stock

For an oval link cut rod the link length plus one-third; for a round link a little over three times its diameter. Nick the lengths off the rod (his fig. 163).

このステップの材料:

錬鉄の丸棒錬鉄の丸棒1 個

必要な工具:

熱間たがね熱間たがね
金床金床
ハンマーハンマー
4

Bend and scarf

Heat the middle of a piece red, bend it into a U (fig. 164), and scarf both ends (fig. 165).

必要な工具:

鍛冶炉鍛冶炉
金床金床
ハンマーハンマー
鍛冶やっとこ鍛冶やっとこ
5

Weld the links

Thread the open link through the last finished link, bring it to a welding heat, close it up and weld it shut. Repeat link by link.

このステップの材料:

砂砂1 個

必要な工具:

鍛冶炉鍛冶炉
金床金床
ハンマーハンマー
鍛冶やっとこ鍛冶やっとこ
6

S-hooks for repairs

Bend S-hooks (fig. 166) from tough iron and cool them slowly. A broken chain is mended in the field by bending the hook ends over the broken links (fig. 167).

このステップの材料:

錬鉄の丸棒錬鉄の丸棒1 個

必要な工具:

鍛冶炉鍛冶炉
金床金床
ハンマーハンマー
7

Swivel link

Cut iron as for a round link, double it (fig. 168), form it over the beck of the anvil (169), weld the ends together and draw them out (170), then form, bend over and scarf (171). Forge the swivel pin (172), set it in the swivel's boss, weld up the eye and finish (173).

このステップの材料:

錬鉄の丸棒錬鉄の丸棒1 個

必要な工具:

鍛冶炉鍛冶炉
金床金床
ハンマーハンマー
鍛冶やっとこ鍛冶やっとこ
8

Troubleshooting

Chain troubleshooting.

Flow

Loading...
9

History and honest limits

From George Edwinson, "Smithing and Forging" VIII, **Amateur Work, Illustrated**, vol. VI (1886-87), p. 83 and figs. 162-175 on p. 80 (checked on the archive.org scan amateurworkillus06lond). He gives no rod size for plough chain; the notebook link sizes, metric figures and tools are ours.

材料

2
  • プレースホルダー
  • 1 個
    プレースホルダー

必要な工具

5

この設計図で作るもの

CC0 パブリックドメイン

このブループリントはCC0で公開されています。許可を求めずに、自由にコピー、修正、配布、あらゆる目的で使用できます。

メイカーを応援するには、ブループリント経由で製品を購入してください。メイカーには メイカーコミッション がベンダーにより設定されています。または、このブループリントの新しいイテレーションを作成し、自分のブループリントにコネクションとして含めて収益を共有できます。

ディスカッション

(0)

ログイン してディスカッションに参加

コメントを読み込み中...