コラボレーション
アート
美容とウェルネス
工芸
文化と歴史
エンターテインメント
環境
食品と飲料
リバースエンジニアリング
科学
スポーツ
テクノロジー
ウェアラブル

Fuller, Pritchel and Hot Setts: Steel Welded into a Split Iron Bar, with Twisted Rod or Withy Handles (Edwinson, 1886)
The smith's own top and bottom tools, from George Edwinson's farrier's chapter in Amateur Work (1886): an inch iron bar upset, split into a fork and a steel wedge welded in, then forged into a fuller, pritchel punch, curved or straight hot sett, or a square-tanged bottom sett; the pritchel itself from 1/2 in. square tool steel; handles of twisted iron rod or green withy.
上級者
A day at the forge for the set
手順
1
1
His proportions
His proportions
Jupyter ノートブックを読み込み中…
2
2
Read Edwinson
Read Edwinson
"To make this tool, heat and upset the end of an inch bar of iron; then heat again and split with a sett."
3
3
Split the iron
Split the iron
Heat and upset the end of a 1 in. (25 mm) iron bar. Heat again and split it with a hot set into a fork 1 to 1 1/4 in. long by 3/4 in. wide (his fig. 108).
このステップの材料:
錬鉄の棒1 個必要な工具:
鍛冶炉
金床
大ハンマー
熱間たがね
鍛冶やっとこ4
4
Weld in the steel
Weld in the steel
Heat the end of a steel bar of similar size and forge a wedge to fit the fork (fig. 109). Bring both to a welding heat and weld them well together.
このステップの材料:
るつぼ鋼1 個
ホウ砂の粉末1 個必要な工具:
鍛冶炉
金床
大ハンマー
鍛冶やっとこ5
5
Forge the fuller
Forge the fuller
Cut off 2 in. of steel and 3 in. of iron for the tool. Forge the steel, with the iron behind it, into the fuller's rounded blade (fig. 102). Make the neck while it is still on the bar, then cut it off leaving a piece of iron for the head.
必要な工具:
鍛冶炉
金床
ハンマー
熱間たがね6
6
Same blank, other tools
Same blank, other tools
Pritchel punch: about 2 in. of iron and 1 in. of steel, shaped as fig. 103. Curved set: as the fuller but with a gouge-shaped blade (fig. 105). Top hot set: the same, with a chisel or wedge blade (fig. 106). Bottom set: a wedge of steel and iron, edge up, on a square tang that fits the anvil's square hole (fig. 107).
このステップの材料:
錬鉄の棒1 個
るつぼ鋼1 個
ホウ砂の粉末1 個必要な工具:
鍛冶炉
金床
ハンマー
大ハンマー
鍛冶やっとこ7
7
Forge the pritchel
Forge the pritchel
Forge 1/2 in. (13 mm) square tool steel into the tapered pritchel (fig. 104), 6 in. (150 mm) long. It punches nail holes in hot iron, so it need not be hardened.
このステップの材料:
工具鋼丸棒1 個必要な工具:
鍛冶炉
金床
ハンマー
鍛冶やっとこ8
8
Fit the handles
Fit the handles
Rod handle: twist 3/8 in. iron rod once round the neck and weld the two ends together (fig. 110). Withy handle: take a green or half-green hazel, willow, oak or withy rod about 3 ft long, twist the middle 8-9 in., wrap it once round the neck and bind the two ends with wire or a link (figs. 106, 111).
このステップの材料:
軟鋼丸棒1 個
柳の枝(しなやか)1 個
鉄の針金1 個必要な工具:
鍛冶炉
金床
ハンマー
鍛冶やっとこ9
9
Harden the cutting tools (ours)
Harden the cutting tools (ours)
He gives no temper for these. Ours: harden and temper the set edges as for other hot-cutting tools, and cool them often in use.
必要な工具:
鍛冶炉
焼き入れ桶10
10
Troubleshooting
Troubleshooting
Top-tool troubleshooting.
Flow
Loading...
11
11
History and honest limits
History and honest limits
From George Edwinson, "Smithing and Forging" VII, **Amateur Work, Illustrated**, vol. VI (1886-87), pp. 14-16 and figs. 101-111 (checked on the archive.org scan amateurworkillus06lond). He calls the top hot cutter a "sett"; we map it to the Hot Chisel head and the bottom sett to the Hot Cut Hardy head. Temper, metric figures and tools are ours.
材料
7- 1 個プレースホルダー
- 1 個プレースホルダー
- 1 個プレースホルダー
- 1 個プレースホルダー
- 1 個プレースホルダー
- 1 個プレースホルダー
- 1 個プレースホルダー
この設計図で作るもの
関連ブループリント
これらのブループリントは知識を共有しています — 技術、材料、原理
CC0 パブリックドメイン
このブループリントはCC0で公開されています。許可を求めずに、自由にコピー、修正、配布、あらゆる目的で使用できます。
メイカーを応援するには、ブループリント経由で製品を購入してください。メイカーには メイカーコミッション がベンダーにより設定されています。または、このブループリントの新しいイテレーションを作成し、自分のブループリントにコネクションとして含めて収益を共有できます。






