コラボレーション
アート
美容とウェルネス
工芸
文化と歴史
エンターテインメント
環境
食品と飲料
リバースエンジニアリング
科学
スポーツ
テクノロジー
ウェアラブル
Steel-Laid Axe and Hatchet: Iron Folded Round a Mandrel, Shear Steel Welded Between the Leaves (Edwinson, 1886)
Forge

作成者

Forge

14. 11月 2026NO
7
0
0
0
0

Steel-Laid Axe and Hatchet: Iron Folded Round a Mandrel, Shear Steel Welded Between the Leaves (Edwinson, 1886)

How axes and hatchets were made of iron and shear steel, from George Edwinson's smithing series (Amateur Work, 1886): a flat iron bar folded round a tapering mandrel to make the eye, the leaves welded, and a thin slice of steel welded between them so the ground edge is always steel.
上級者
A day at the forge

手順

1

Read Edwinson

"By this means a layer of steel is enclosed between two layers of iron, and a steel edge is always ensured to the tool."
2

Fold the eye

Take flat iron of the width and thickness you want, twice the length of the blade. Heat it and bend it over a tapering mandrel the same section as the handle (his fig. 225).

このステップの材料:

錬鉄の棒錬鉄の棒1 個

必要な工具:

鍛冶炉鍛冶炉
金床金床
大ハンマー大ハンマー
鍛冶やっとこ鍛冶やっとこ
穴広げポンチ穴広げポンチ
3

Close and shape the eye

Weld the two leaves together where they meet near the eye. Reheat and forge the eye to shape on the mandrel, then drive the mandrel in the other way to open the inner edge of the eye slightly.

このステップの材料:

ホウ砂の粉末ホウ砂の粉末1 個

必要な工具:

鍛冶炉鍛冶炉
金床金床
ハンマーハンマー
穴広げポンチ穴広げポンチ
4

Lay in the steel

Put a thin slice of shear steel, as wide as the axe, between the two leaves. Bring both to a welding heat and forge them down together to the thickness and width wanted.

このステップの材料:

シャー鋼板シャー鋼板1 個
ホウ砂の粉末ホウ砂の粉末1 個

必要な工具:

鍛冶炉鍛冶炉
金床金床
大ハンマー大ハンマー
鍛冶やっとこ鍛冶やっとこ
5

Hatchet hammer (variant)

For a carpenter's hatchet (fig. 223) weld a rectangular piece of steel to the back of the eye and forge it down with it as the hammer. The miner's hatchet (fig. 224) has a massive ear, a bar-steel hammer and a slit in the blade for drawing nails. Do not make a woodman's axe square-headed: men drive wedges with the back and spoil it.

このステップの材料:

るつぼ鋼るつぼ鋼1 個

必要な工具:

鍛冶炉鍛冶炉
金床金床
ハンマーハンマー
熱間たがね熱間たがね
6

Pare and smooth

Pare the rough forging to shape with hot chisels (his setts) while hot. Hammer the sides well at a low red heat until smooth.

必要な工具:

鍛冶炉鍛冶炉
熱間たがね熱間たがね
金床金床
ハンマーハンマー
7

Harden, temper and grind

Harden and temper the blade, then grind it on a grindstone to sharpen the edge and polish the blade.

必要な工具:

鍛冶炉鍛冶炉
焼き入れ桶焼き入れ桶
回転砥石回転砥石
8

Hang the head (ours)

He does not cover the handle. Ours: fit a hickory handle blank to the eye and wedge it.

このステップの材料:

木製斧柄の荒材(ヒッコリー)木製斧柄の荒材(ヒッコリー)1 個
木のくさび木のくさび1 個

必要な工具:

ドローナイフドローナイフ
ハンマーハンマー
9

Troubleshooting

Axe troubleshooting.

Flow

Loading...
10

History and honest limits

From George Edwinson, "Smithing and Forging" (part X), **Amateur Work, Illustrated**, vol. VI (Ward, Lock & Co., 1886-87), pp. 211-214 (checked on the archive.org scan amateurworkillus06lond), p. 212 and figs. 222-225. He gives no temper colour for axes, no sizes and no handle: those are ours.

材料

6

必要な工具

10

関連ブループリント

これらのブループリントは知識を共有しています — 技術、材料、原理

CC0 パブリックドメイン

このブループリントはCC0で公開されています。許可を求めずに、自由にコピー、修正、配布、あらゆる目的で使用できます。

メイカーを応援するには、ブループリント経由で製品を購入してください。メイカーには メイカーコミッション がベンダーにより設定されています。または、このブループリントの新しいイテレーションを作成し、自分のブループリントにコネクションとして含めて収益を共有できます。

ディスカッション

(0)

ログイン してディスカッションに参加

コメントを読み込み中...