アート
美容とウェルネス
工芸
文化と歴史
エンターテインメント
環境
食品と飲料
リバースエンジニアリング
科学
スポーツ
テクノロジー
ウェアラブル
Electricity From the Wind: The Cube Law and a Rotor on a Dynamo
Volt

作成者

Volt

27. 9月 2026SE
4
0
0
0
0

Electricity From the Wind: The Cube Law and a Rotor on a Dynamo

For a thousand years windmills ground grain and pumped water. In the winter of 1887–88 Charles F. Brush put one to a new job in the back garden of his house in Cleveland, Ohio: a 17-metre rotor of 144 cedar blades turning a dynamo that charged a cellar full of batteries — electricity from the wind. Everything about a wind generator follows from one relation: the power in the wind goes with the cube of its speed and the square of the rotor's diameter. That is why turbines grew huge and why their sites are chosen with such care. This rung builds a small wind generator from a hobby motor and a printed rotor, measures its power in front of a fan at several wind speeds, and checks the cube law.
初心者
About 4 hours

手順

1

The cube law

Jupyter ノートブックを読み込み中…
2

Build a small wind generator

A small permanent-magnet DC motor is also a generator: turn its shaft and it makes a voltage proportional to speed. Print a three-bladed rotor 300 mm across in PETG, with a hub that presses onto the motor shaft, each blade twisted — steep near the hub, flatter towards the tip — because the tip moves faster through the air than the root. Mount the motor on a dowel mast clamped to a plywood base, with the rotor facing the fan. Wire the motor's terminals to a 330 Ω resistor as a load, with the multimeter across it. Add an LED in series if you want to see it light.

このステップの材料:

Hobby Motor - GearHobby Motor - Gear1 個
PETGフィラメントPETGフィラメント60 g
堅木のダボ堅木のダボ1 セット
合板合板1 枚
330 オーム抵抗330 オーム抵抗1 個
5 mm LED5 mm LED1 個
ジャンパワイヤジャンパワイヤ1 セット

必要な工具:

FDM 3D プリンターFDM 3D プリンター
コードレスドリルコードレスドリル
ドリルビットセットドリルビットセット
六角レンチセット六角レンチセット
3

Measure its power at three wind speeds

Stand the box fan 1.5 m away, facing the rotor. Measure the wind speed at the rotor with the anemometer before fitting the rotor, at each fan setting. Fit the rotor, run the fan, and read the voltage across the resistor once it is steady. The electrical power is **V² ÷ R**. Record wind speed and power for each fan setting. Plot power against wind speed cubed. It should be roughly a straight line — not exactly, because a small motor's own losses take a bigger share at low speed. Then divide your power by the notebook's power passing through a 0.3 m disc at the same wind speed. That ratio is your rotor's power coefficient, and the Betz rung shows the most it could ever be.

必要な工具:

ボックスファン(可変速)ボックスファン(可変速)
手持ち風速計手持ち風速計
マルチメーターマルチメーター
メジャー(巻尺)メジャー(巻尺)
デジタル回転計デジタル回転計
4

History and context

**Charles F. Brush, Cleveland, Ohio, 1887–88** — a 17 m, 144-bladed rotor on a tower about 18 m (60 ft) high driving a 12 kW dynamo through step-up gearing, charging batteries that lit his house; it ran for some twenty years. Brush had already built the arc-lighting dynamo in this catalogue. No patent number is asserted here. In Denmark from 1891, **Poul la Cour** tested rotors in a wind tunnel of his own and found that fewer blades turning faster made better use of the wind than many slow ones — the direction every modern turbine took. **Honest limits.** The wind stops; a wind generator needs storage or another source behind it. Its output swings with the cube of a quantity that changes by the minute. And a large rotor is a serious hazard: it must be able to stop itself in a storm, as the Halladay windmill's governor in this catalogue already could.

材料

7

必要な工具

9
見積もり合計
作った人が買ったもの。価格のない材料は、購入する店で入手します。
¥4

CC0 パブリックドメイン

このブループリントはCC0で公開されています。許可を求めずに、自由にコピー、修正、配布、あらゆる目的で使用できます。

メイカーを応援するには、ブループリント経由で製品を購入してください。メイカーには メイカーコミッション がベンダーにより設定されています。または、このブループリントの新しいイテレーションを作成し、自分のブループリントにコネクションとして含めて収益を共有できます。

ディスカッション

(0)

ログイン してディスカッションに参加

コメントを読み込み中...