コラボレーション
アート
美容とウェルネス
工芸
文化と歴史
エンターテインメント
環境
食品と飲料
リバースエンジニアリング
科学
スポーツ
テクノロジー
ウェアラブル

Lead-Lined Tank: a Steel Acid Tank with an Antimonial Lead Lining (Bell, 1923)
A riveted steel tank lined with sheet lead, for weak sulphuric acid, which eats bare steel. The lead hangs from the top angle and is held to the shell by steel straps covered with lead burned to the lining.
Bell's example (Fig. 170) is a vertical tank 15 ft across and 10 ft high, lined with 6 % antimony lead at 7 1/2 lb per sq ft.
Source: H. S. Bell, American Petroleum Refining (1923), pp. 305-306. Picture: Fig. 170 of the book.
エキスパート
Unknown
手順
1
1
Build the steel tank
Build the steel tank
Build the shell as a standard riveted vertical tank, with plate at least 3/8 in thick. Drive the rivets with flat heads 1/16 to 1/8 in high inside, and leave out an occasional rivet so leaks in the lining can be found. The shell plates need not be bevelled or caulked. If you can, stand it on concrete piers with steel I-beams so the bottom can be inspected, and protect the concrete with coal tar or petroleum pitch.
このステップの材料:
軟鋼板1 3/8 in min.
鋼製リベット1 個必要な工具:
リベットハンマー
コールタールピッチ
不明な寸法2
2
Cut the lead
Cut the lead
Use chemical lead at 8 lb per sq ft, or 6 % antimony lead at 7 1/2 lb per sq ft. For Bell's 15 x 10 ft tank: 7 sheets 10 ft 11 in x 7 ft 2 in, 7 sheets 10 ft 11 in x 7 in, and 2 half-circle sheets of 8 ft radius for the bottom.
このステップの材料:
鉛板16 sheets, 6 % antimony, 7 1/2 lb/sq ft必要な工具:
金切りばさみ3
3
Hang and strap the lining
Hang and strap the lining
Dress the lead over the top angle to carry it. Hold it to the shell with straps of round-edged tire steel (Fig. 170: seven straps 2 1/2 x 3/8 in, about 9 ft long), no more than 8 ft apart round the shell; round edges won't cut the lead while it is dressed. Bolt the straps through the shell with 1/2 in bolts, heads countersunk inside.
このステップの材料:
軟鋼平鋼7 2 1/2 x 3/8 in, about 9 ft
六角ボルト - 強度区分 8.81 1/2 in, number not given必要な工具:
木槌4
4
Burn the seams and cover the straps
Burn the seams and cover the straps
Burn (fuse) the lead seams together. Burn a narrow strip of lead over each strap onto the lining, so no steel or bolt head is left bare to the acid. Not given: the burning tool.
このステップの材料:
鉛板1 cover strips必要な工具:
松明材料
5- 1 3/8 in min.プレースホルダー
- 1 個プレースホルダー
- 1 cover stripsプレースホルダー
- 7 2 1/2 x 3/8 in, about 9 ftプレースホルダー
- 1 1/2 in, number not givenプレースホルダー
接続ブループリントの材料
この設計図で作るもの
CC0 パブリックドメイン
このブループリントはCC0で公開されています。許可を求めずに、自由にコピー、修正、配布、あらゆる目的で使用できます。
メイカーを応援するには、ブループリント経由で製品を購入してください。メイカーには メイカーコミッション がベンダーにより設定されています。または、このブループリントの新しいイテレーションを作成し、自分のブループリントにコネクションとして含めて収益を共有できます。

