アート
美容とウェルネス
工芸
文化と歴史
エンターテインメント
環境
食品と飲料
リバースエンジニアリング
科学
スポーツ
テクノロジー
ウェアラブル

Piston-Pump Egg Beater: Pump the Eggs Through a Grate
A whisk stirs the eggs; it does not force them through anything.
J. J. Parker of Marietta, Ohio, received US 25,038, dated 9 August 1859, for an egg beater and churn combined: a tin tube with square openings at its lower end and a piston inside, worked up and down "in the manner of a pump" by a crank, which "draws the eggs in and out through the grate bars until they are completely torn in pieces or made perfectly fine and frothy"; a band turned round the tube's foot closes the openings to vary the agitation.
This rung works out the jet speed at each band setting, then prints the tube, band and piston, fits the crank, and times a beating at two settings.
中級者
About 3 hours, plus printing
手順
1
1
Jet speed at each setting
Jet speed at each setting
Jupyter ノートブックを読み込み中…
2
2
The churning it also does
The churning it also does
The embedded blueprint churns cream to butter. Parker's pump-tube does the same when worked longer in cream.
3
3
Read US 25,038
Read US 25,038
"At the lower end of the tube is a band of about one half an inch in width loosely fitted with openings one fourth of an inch square and corresponding exactly with the openings in the tube and of the same size, so that by turning the band around either way the openings are closed or made smaller at pleasure, so as to produce more or less agitation in the eggs or cream. This band has a bottom with grate like bars cut or made in it."
4
4
Print the tube, band and piston
Print the tube, band and piston
Print the tube, the band with its grate and the piston disk. Print in PETG at 0.2 mm layers, 30 % infill, 4 walls.
このステップの材料:
PETGフィラメント1 個必要な工具:
FDM 3D プリンター7
7
Print the piston
8
8
Pack the piston
Pack the piston
Cut a leather disk 2 mm larger than the piston. Clamp it between the printed disk and a washer on an M3 rod end with a nut, so its edge seals the tube.
このステップの材料:
革1 個
平ワッシャー1 個
六角ナット1 個
小ねじ1 個必要な工具:
クラフトナイフ
モンキーレンチ
デジタルノギス 6インチ9
9
Post and crank
Post and crank
Epoxy a 4 mm wire post up the tube's side, bent at its top into bearings 100 mm above the tube. Bend a crank shaft of 3 mm wire with a 22 mm crank one end and a handle the other, and link the crank to the rod with a wire pitman.
このステップの材料:
軟鋼丸棒1 個
ステンレス線1 個
二液性エポキシ1 個必要な工具:
万力(ベンチバイス)
丸口ペンチ
平やっとこ
金切りのこ(ハクソー)
透明保護メガネ10
10
The patent drawing
The patent drawing
US 25,038 drawing sheet, public domain (expired patent).

11
11
Beat at two settings
Beat at two settings
Stand the beater in a bowl with two eggs and a spoon of sugar. Crank twice a second with the band fully open and time to a fine froth; repeat with the band half closed.

このステップの材料:
卵4 個
グラニュー糖1 個必要な工具:
ステンレス鋼の大きな混ぜ鉢
ストップウォッチ12
12
A pump that leaks past, sticks or splashes
A pump that leaks past, sticks or splashes
Piston-pump egg beater troubleshooting.
Flow
Loading...
13
13
History and honest limits
History and honest limits
**J. J. Parker** of Marietta, Ohio, received US 25,038, dated 9 August 1859. His smaller machine's tube is one and a half inches across and one and five eighths deep; the crank shaft is No. 7 wire with a seven-eighths-inch crank; the piston is two oval pieces of thin metal with leather between, its edges forced out by pressing them together. It may also be worked by a handle on the rod instead of a crank.
**Honest limits.** FDM prints hold food in their layer lines, so wash well and replace when worn. Printed PETG stands in for tin. The notebook treats the flow as steady. Your times are the result.
材料
10- 1 個プレースホルダー
- 1 個プレースホルダー
- 1 個プレースホルダー
- 1 個プレースホルダー
- 1 個プレースホルダー
- 1 個プレースホルダー
- 1 個プレースホルダー
- 1 個プレースホルダー
- 4 個プレースホルダー
- 1 個プレースホルダー
必要な工具
11- プレースホルダー
- プレースホルダー
- プレースホルダー
- プレースホルダー
- プレースホルダー
- プレースホルダー
- プレースホルダー
- プレースホルダー
- プレースホルダー
- プレースホルダー
- プレースホルダー
設計ファイル
3この設計図で作るもの
関連ブループリント
これらのブループリントは知識を共有しています — 技術、材料、原理
CC0 パブリックドメイン
このブループリントはCC0で公開されています。許可を求めずに、自由にコピー、修正、配布、あらゆる目的で使用できます。
メイカーを応援するには、ブループリント経由で製品を購入してください。メイカーには メイカーコミッション がベンダーにより設定されています。または、このブループリントの新しいイテレーションを作成し、自分のブループリントにコネクションとして含めて収益を共有できます。



