コラボレーション
アート
美容とウェルネス
工芸
文化と歴史
エンターテインメント
環境
食品と飲料
リバースエンジニアリング
科学
スポーツ
テクノロジー
ウェアラブル

Sodium Hydroxide Solution: Normal Caustic Soda, 40 g per Litre (Sutton, 1904)
The standard normal (1 M) caustic soda solution for titration: 40 g NaOH in each litre. Make it a little too strong, check it against normal acid, bring it to exact strength and keep it away from the air, which it takes carbon dioxide from.
Result: normal sodium hydroxide solution, its strength proved by titration.
Source: F. Sutton, A Systematic Handbook of Volumetric Analysis (1904), p. 48. Picture: that page of the book.
初心者
Unknown
手順
1
1
Dissolve the caustic soda
Dissolve the caustic soda
Dissolve pure caustic soda in distilled water until the solution has a specific gravity of about 1.05, about 50 g to the litre: a little stronger than normal (40 g to the litre). Expose it to the air as little as possible.
このステップの材料:
水酸化ナトリウム——試薬級1 about 50 g per litre
蒸留水1 solvent必要な工具:
メスシリンダー2
2
Titrate and adjust
Titrate and adjust
Estimate its strength roughly with normal acid and methyl orange. Then titrate 50 ml of it exactly against normal acid and adjust it to exact normal strength. Methyl orange works cold even if the solution has taken up some carbon dioxide; with litmus or phenolphthalein, titrate boiling. Not given: the dilution, implied by the adjustment. Ours: hydrochloric acid as the normal acid; methyl orange as the pH indicator solution.
必要な工具:
塩酸
pH指示薬溶液
ビュレット(ガラス)
ピペット3
3
Store it
Store it
Once its strength is settled, keep it in a bottle that shuts out the air, or in full bottles with their glass stoppers lightly greased with vaseline.
必要な工具:
ガラス瓶(無色透明)
ワセリン接続ブループリントの材料
この設計図で作るもの
CC0 パブリックドメイン
このブループリントはCC0で公開されています。許可を求めずに、自由にコピー、修正、配布、あらゆる目的で使用できます。
メイカーを応援するには、ブループリント経由で製品を購入してください。メイカーには メイカーコミッション がベンダーにより設定されています。または、このブループリントの新しいイテレーションを作成し、自分のブループリントにコネクションとして含めて収益を共有できます。


