コラボレーション
アート
美容とウェルネス
工芸
文化と歴史
エンターテインメント
環境
食品と飲料
リバースエンジニアリング
科学
スポーツ
テクノロジー
ウェアラブル
Steam Still: a Horizontal Still with Steam Coils and Scrubbing Tower (Bell, 1923)
Forge

作成者

Forge

4. 11月 2026NO
10
0
0
2
0

Steam Still: a Horizontal Still with Steam Coils and Scrubbing Tower (Bell, 1923)

A refinery still heated only by steam: a horizontal riveted shell with closed steam coils and open steam sprays in the bottom, and a tower of broken stone or tile on top where rising vapour meets the incoming feed. Used to re-run naphtha and kerosene and to strip naphtha from lubricating stocks without a fire. Variable: batch, semi-continuous, or continuous with four baffled compartments. Bell's Fig. 39 still is 10 x 30 ft. Source: H. S. Bell, American Petroleum Refining (1923), pp. 105-109. Unknown: plate thickness. Picture: Fig. 39 of the book.
エキスパート
Unknown

手順

1

Build the shell

Rivet a horizontal cylindrical shell (Fig. 39: 10 x 30 ft) with the plate seams running straight round it (Fig. 36), cheaper than a fire still's layout; hemispherical heads are an expense with no clear reason. Fit a manhole, a drain, flanges for oil and steam and a nozzle for the tower.

このステップの材料:

軟鋼板軟鋼板1 shell, heads
軟鋼の山形鋼軟鋼の山形鋼1 個
鋼製リベット鋼製リベット1 個

必要な工具:

パンチプレスパンチプレス
リベットハンマーリベットハンマー
不明な寸法不明な寸法
2

Fit coils, sprays and baffles

Lay closed steam coils in the bottom with open steam sprays beside them. For continuous running, divide the shell into four compartments with cross baffles, leaving small openings at the bottom so condensed water drains to the water pot at the rear. Give the coils 62.5 sq ft of heating surface per 100 gallons taken overhead per hour: 33 % in the first compartment, 28 % in the second, 22 % in the third, 17 % in the rear. A semi-continuous still needs no baffles.

このステップの材料:

蒸気コイル蒸気コイル1 62.5 sq ft per 100 gal/h
鋼管(厚肉・両端ねじ切り)鋼管(厚肉・両端ねじ切り)1 open sprays, header
蒸気弁蒸気弁2 個
軟鋼板軟鋼板1 baffles

必要な工具:

リベットハンマーリベットハンマー
3

Add the scrubbing tower

Mount a combined scrubbing and dephlegmating tower on the still, filled with broken stone or tile. The feed enters at its top and trickles down against the rising vapour and steam, which condenses the heavier fractions and carries them back to the still; the vapour goes on to the condensers.

このステップの材料:

軟鋼板軟鋼板1 tower
鋼製リベット鋼製リベット1 個
砕石砕石1 broken stone or tile

必要な工具:

リベットハンマーリベットハンマー
4

Set it

Settings are simple: brick cross piers or steel frames, with brick or concrete dividing walls between stills where they must carry the tower and heat exchangers. Pipe the residual outlet with a valve.

このステップの材料:

れんがれんが1 cross piers
仕切弁仕切弁1 residual

必要な工具:

左官ごて左官ごて

材料

9
  • 1 tower
    プレースホルダー
  • プレースホルダー
  • プレースホルダー
  • 1 62.5 sq ft per 100 gal/h
    プレースホルダー
  • プレースホルダー
  • プレースホルダー
  • 1 broken stone or tile
    プレースホルダー
  • 1 cross piers
    プレースホルダー
  • 1 residual
    プレースホルダー

必要な工具

4

CC0 パブリックドメイン

このブループリントはCC0で公開されています。許可を求めずに、自由にコピー、修正、配布、あらゆる目的で使用できます。

メイカーを応援するには、ブループリント経由で製品を購入してください。メイカーには メイカーコミッション がベンダーにより設定されています。または、このブループリントの新しいイテレーションを作成し、自分のブループリントにコネクションとして含めて収益を共有できます。

ディスカッション

(0)

ログイン してディスカッションに参加

コメントを読み込み中...