コラボレーション
アート
美容とウェルネス
工芸
文化と歴史
エンターテインメント
環境
食品と飲料
リバースエンジニアリング
科学
スポーツ
テクノロジー
ウェアラブル

Teapot: a Tinplate Picnic Teapot with Cock and Strainer (Hasluck, 1907)
A square tinplate teapot from a picnic outfit: folded from one blank, with a hinged lid, and a cock at the bottom behind a perforated strainer that holds back the leaves.
Blank 1 ft 4 1/4 in by 1 ft 0 3/8 in; lid 4 1/8 by 4 in.
Source: Paul N. Hasluck, Tinplate Work (1907), pp. 37-39. Unknown: folding order, solder, the cock. Picture: Figs. 96-97 of the book.
中級者
Unknown
手順
1
1
Cut the body blank
Cut the body blank
Cut a piece of tin 1 ft 4 1/4 in long by 1 ft 0 3/8 in wide and mark the pattern of Fig. 96 on it, with the hole for the cock tube. Not given: the folding order. Ours: bend it up on the dotted lines and solder the seams.
このステップの材料:
ブリキ板1 body
錫鉛はんだ1 個必要な工具:
けがき針
金切りばさみ
杭
木槌
電気はんだごて
フラックス2
2
Fit the cock and strainer
Fit the cock and strainer
Solder a tube about 1/2 in long into the hole for the cock (Fig. 97) and fit the cock to it. Develop the strainer (Fig. 98): top curve radius 1 13/16 in, chord corner to corner 2 15/16 in. Perforate it and solder it across the corner in front of the tube (Fig. 99).
このステップの材料:
真鍮管1 1/2 in
排出コック1 個
ブリキ板1 strainer
錫鉛はんだ1 個必要な工具:
ディバイダー(両脚規)
金切りばさみ
板金用穴あけポンチ
堅木のブロック
電気はんだごて
フラックス3
3
Make the hinged lid
Make the hinged lid
Cut the lid (Fig. 100) 4 1/8 by 4 in; the inner rectangle 3 1/2 by 3 1/2 in leaves 1/4 in to bend up. Cut hinge projections 1/2 in wide by 5/8 in deep with equal spaces, the outer ones only 1/4 in wide. Bend them round a wire 1/16 in thick. Hasluck adds that the teapot may be enamelled dark green.
このステップの材料:
ブリキ板1 lid
鉄の針金1 1/16 in必要な工具:
金切りばさみ
杭
木槌材料
5- 1 lidプレースホルダー
- 2 個プレースホルダー
- 1 1/2 inプレースホルダー
- 1 個プレースホルダー
- 1 1/16 inプレースホルダー
接続ブループリントの材料
この設計図で作るもの
CC0 パブリックドメイン
このブループリントはCC0で公開されています。許可を求めずに、自由にコピー、修正、配布、あらゆる目的で使用できます。
メイカーを応援するには、ブループリント経由で製品を購入してください。メイカーには メイカーコミッション がベンダーにより設定されています。または、このブループリントの新しいイテレーションを作成し、自分のブループリントにコネクションとして含めて収益を共有できます。


