アート
美容とウェルネス
工芸
文化と歴史
エンターテインメント
環境
食品と飲料
リバースエンジニアリング
科学
スポーツ
テクノロジー
ウェアラブル
The Calculating Cheese-Cutter: A Wheel Set by the Cheese's Weight
A grocer cutting a slice from a whole round cheese had to guess, weigh, and trim until the weight was right.
Henry G. Roth of Minneapolis received US 657,621, dated 11 September 1900, for a "calculating cutting device for cheeses of circular cake form": the cheese turns on a table while a small measuring wheel rolls on its top, set along a graduated rod according to the cheese's total weight, so that each turn of the wheel marks the same weight of cheese, whatever the cheese weighs.
This rung works out why the total weight cancels, then builds a turntable with a weight dial and cuts wedges to a set weight.
中級者
About 3 hours
手順
1
1
Weight per turn, and the wedge angle
Weight per turn, and the wedge angle
Jupyter ノートブックを読み込み中…
2
2
A wheel that measures
A wheel that measures
The embedded blueprint counts a wheel's turns to measure distance. Roth's wheel counts turns to measure weight of cheese.
3
3
Read US 657,621
Read US 657,621
"My present invention has for its object to provide a calculating cutting device for cheeses of circular cake form".
"The twenty-pound graduation indicates a position just one-half as far from the axis of the centering-tube b as does the forty-pound graduation."
As illustrated, the measuring wheel "is shown of such diameter that it will be given one complete rotation when properly set each time the cake of cheese is moved the distance occupied by a five-pound segment of the cake."
4
4
Build a weight dial and cut wedges to weight
Build a weight dial and cut wedges to weight
Cut a plywood disk a little larger than the cheese and screw it to the lazy Susan. Drive a short stainless screw up through its centre as a pin to hold the cheese in place.
On card stock, draw a circle and mark the wedge angles for 100 g and 250 g for cheeses of several weights, using the notebook's rule, with the protractor. Lay the card under a clear sheet on the disk, lined up with the pin.
Weigh a whole round cheese and set it on the pin. Line a straight knife up with the pin and the mark for the weight you want, and cut. Weigh the wedge and write down the error. Cut three wedges and compare.
このステップの材料:
合板1 個
回転トレー1 個
カードストック1 個
木ねじ5 個
チーズ1000 g必要な工具:
チーズカッター
ナイフ
分度器
定規
デジタルキッチンスケール
糸のこ（コーピングソー）
コードレスドリル
油性マーカー5
5
Wedges that come out too heavy or too light
Wedges that come out too heavy or too light
Cheese-cutter troubleshooting.
Flow
Loading...
6
6
History and honest limits
History and honest limits
**Henry G. Roth** of Minneapolis filed US 657,621 on 29 June 1900; it was patented 11 September 1900. He graduated both sides of the dial case so that "both the salesmen from the inside of the counter and the purchaser from the outside of the counter" could read them.
**Honest limits.** Both methods assume the cheese is the same density all the way round. The 20 lb radius is an example. Your weighed wedges are the measurement.
関連ブループリント
これらのブループリントは知識を共有しています — 技術、材料、原理
CC0 パブリックドメイン
このブループリントはCC0で公開されています。許可を求めずに、自由にコピー、修正、配布、あらゆる目的で使用できます。
メイカーを応援するには、ブループリント経由で製品を購入してください。メイカーには メイカーコミッション がベンダーにより設定されています。または、このブループリントの新しいイテレーションを作成し、自分のブループリントにコネクションとして含めて収益を共有できます。