アート
美容とウェルネス
工芸
文化と歴史
エンターテインメント
環境
食品と飲料
リバースエンジニアリング
科学
スポーツ
テクノロジー
ウェアラブル
The Ring-Set Lemon Squeezer: A Bowl Held in Its Handle by a Screwed Ring
YourGrandma

作成者

YourGrandma

30. 9月 2026IS
39
0
0
0
0

The Ring-Set Lemon Squeezer: A Bowl Held in Its Handle by a Screwed Ring

A squeezer's bowl set loose in a wooden handle works free, and one fixed in for good cannot be taken out to clean or replace. James L. Jensen of Brooklyn, New York, received US 104,159, dated 14 June 1870, for "the best means of inserting a lemon-squeezer in its handles", "forming an annular flange on the cup, but below the top thereof, placing it upon the open shoulder of the handle, and detachably fastening thereon an independent annular ring flush with the top." The bowl's flange rests in a stepped recess cut in the handle's face; a wooden ring fits between the bowl's top and the recess wall and is held by screws. This rung works out what the ring's screws carry, then makes hinged hardwood handles with a tin bowl set in a stepped recess and held by a screwed ring, and squeezes lemons with it.
中級者
About 4 hours

手順

1

The ring's screws

Jupyter ノートブックを読み込み中…
2

A hinged squeezer before it

The embedded blueprint sets a sprung button in one of two hinged levers. Jensen sets the bowl itself into the handle so it can be taken out.
3

Read US 104,159

"I make the bowls A with a horizontal flange, B, on the outside, near the top, and provide an annular recess in the face of the handles C, to which they are to be attached. This recess is deeper than the thickness of the rim B, and it is widened on the plane of the top of the said rim when resting in the bottom. In this widened part a ring of wood, D, is secured by screws E fitting snugly between the top of the cup and the wall of the recess, and upon the top of the rim B." "This arrangement makes a very simple, cheap, and efficient fastening, and is applicable for securing said cups into wood or metal for any other purpose."
4

Make the handles and set the bowl

**Bowl.** Cut the bottom 3 cm off a clean tin can and punch holes in its base. Solder a ring of tinplate round its outside 5 mm below its top as the flange B. **Handles.** Cut two hardwood handles, one with a round end for the bowl, and join them at the other end of that round with a butt hinge. In the lower handle's round end, cut a hole the bowl drops through, and round it a stepped recess: a shoulder for the flange to rest on, widened above it. **Ring.** Cut a hardwood ring that fits the widened part, between the bowl's top and the recess wall, and bears on the flange. Screw it down with three screws into the handle. **Press.** Screw a hardwood dome to the upper handle so it closes into the bowl. **Test.** Squeeze lemons over a glass. Then unscrew the ring, lift the bowl out, clean it and set it back.

このステップの材料:

ブリキ缶ブリキ缶1 個
ブリキ板ブリキ板1 個
無鉛の配管はんだ無鉛の配管はんだ1 個
フラックスフラックス1 個
堅木の板堅木の板1 個
堅木のブロック堅木のブロック1 個
平蝶番平蝶番1 個
木ねじ木ねじ8 個
レモンレモン2 個

必要な工具:

金切りばさみ金切りばさみ
釘釘
ハンマーハンマー
はんだごてはんだごて
手のこぎり手のこぎり
木工のみセット木工のみセット
コードレスドリルコードレスドリル
ドリルビットセットドリルビットセット
荒目やすり荒目やすり
ドライバーセットドライバーセット
包丁包丁
飲用グラス飲用グラス
革の作業用手袋革の作業用手袋
5

A bowl that rocks, leaks or will not come out

Ring-set lemon squeezer troubleshooting.

Flow

Loading...
6

History and honest limits

**James L. Jensen** of Brooklyn, Kings County, New York, received US 104,159, dated 14 June 1870. His handles C carried the recess into which the bowls were attached, and he held the fastening applicable for securing cups in wood or metal for other purposes. His claim is the annular flange below the cup's top, the open circular recess in the handle, and the independent annular ring detachably fastened. **Honest limits.** A tin can with a soldered flange stands in for his bowl. The notebook gives the most a screw could carry; its forces, lengths and screw counts are examples. Your squeezing and cleaning are the result.

材料

9

必要な工具

13

CC0 パブリックドメイン

このブループリントはCC0で公開されています。許可を求めずに、自由にコピー、修正、配布、あらゆる目的で使用できます。

メイカーを応援するには、ブループリント経由で製品を購入してください。メイカーには メイカーコミッション がベンダーにより設定されています。または、このブループリントの新しいイテレーションを作成し、自分のブループリントにコネクションとして含めて収益を共有できます。

ディスカッション

(0)

ログイン してディスカッションに参加

コメントを読み込み中...