コラボレーション
アート
美容とウェルネス
工芸
文化と歴史
エンターテインメント
環境
食品と飲料
リバースエンジニアリング
科学
スポーツ
テクノロジー
ウェアラブル

Double-Ended Scriber from a Worn Saw File: Annealed in Lime, Filed Round in a Grooved Block, Points Hardened (Thompson, Amateur Work)
The marking scriber Richard Thompson made for his surface gauge in Amateur Work: 1/8 in. steel or a worn-out saw file, drilled in the middle, pointed at both ends with one end bent, annealed by burying it red-hot in lime, filed round while turned in a grooved hardwood block, and the points hardened.
初心者
Two hours
手順
1
1
Read Thompson
Read Thompson
"A worn-out saw file will answer very well, with a hole drilled through the centre to fit the bolt and pointed at each end, one of which is bent."
2
2
Rough the shape
Rough the shape
Forge a flat piece of steel about 1/8 in. (3 mm) thick, or a worn-out saw file, roughly to shape: pointed at both ends, one end bent into a short hook (his fig. 30).
このステップの材料:
工具鋼平鋼1 個必要な工具:
鍛冶炉
金床
ハンマー
鍛冶やっとこ3
3
Anneal in lime
Anneal in lime
Heat it gently to a dull red and bury it in lime to cool slowly: it is then easy to file.
このステップの材料:
消石灰(水酸化カルシウム)1 個必要な工具:
鍛冶炉
鍛冶やっとこ4
4
Drill and flatten
Drill and flatten
Drill a hole through the middle to fit the mounting bolt and file the flat part to an even thickness for about 1/2 in. each side of the hole.
必要な工具:
ボール盤
万力(ベンチバイス)
やすり(手やすり)5
5
File it round
File it round
Cut a groove along the end of a hardwood block about 3 x 2 x 1/2 in., held end up in the vice. Lay the scriber in the groove, turn it slowly toward you with the left hand and file it round with the right. File the points quite sharp.
このステップの材料:
堅木の板1 個必要な工具:
手のこぎり
万力(ベンチバイス)
やすり(手やすり)6
6
Harden the points
Harden the points
Harden the points (he gives no method; ours: heat the tips to a bright red and quench in water), then touch them up on an oilstone.
必要な工具:
鍛冶炉
焼き入れ桶
砥石7
7
Troubleshooting
Troubleshooting
Scriber troubleshooting.
Flow
Loading...
8
8
History and honest limits
History and honest limits
From Richard Thompson, "How to Construct a Compound Microscope" III, **Amateur Work, Illustrated**, vol. III, p. 198 and fig. 30 (checked on the archive.org scan amateurworkillus03lond). He mounts the scriber on a mahogany surface gauge with three brass washers 3/4 in. across and 1/16 in. thick. The hardening method, metric figures and tools are ours.
この設計図で作るもの
関連ブループリント
これらのブループリントは知識を共有しています — 技術、材料、原理
CC0 パブリックドメイン
このブループリントはCC0で公開されています。許可を求めずに、自由にコピー、修正、配布、あらゆる目的で使用できます。
メイカーを応援するには、ブループリント経由で製品を購入してください。メイカーには メイカーコミッション がベンダーにより設定されています。または、このブループリントの新しいイテレーションを作成し、自分のブループリントにコネクションとして含めて収益を共有できます。

