Ushirikiano
SANAA
UREMBO NA USTAWI
UJANJA
UTAMADUNI NA HISTORIA
BURUDANI
MAZINGIRA
CHAKULA NA VINYWAJI
UHANDISI WA KINYUME
SAYANSI
MICHEZO
TEKNOLOJIA
VAZI

Inexpensive Bobsled: Barrel-Stave Runners, Block Knees and a Bolted Front Bob (Boy Mechanic, 1915)
H. J. Blacklidge's bobsled from The Boy Mechanic, Book 2 (1915): "any boy who can drive a nail and bore a hole can have a bobsled on short notice." Four barrel staves make the runners of two short bobs under a 4 ft board; the front bob turns on a centre bolt and is steered by a rope.
Mwanzo
About 3 hours
Maagizo
1
1
His list in centimetres
His list in centimetres
Inapakia daftari la Jupyter…
2
2
Read The Boy Mechanic, Book 2
Read The Boy Mechanic, Book 2
The materials: four good, solid barrel staves; four blocks 4 in long, 4 in wide and 2 in thick; two pieces 12 in long, 4 in wide and 1 in thick; one piece 12 in long, 2 in wide and 1-3/4 in thick; and a good board 4 ft long, 12 in wide and 1 in thick.
3
3
Make the two bobs
Make the two bobs
Make each crosspiece-and-knee unit from one 12 x 4 x 1 in piece and two of the blocks, as in his figure, and nail a barrel stave to each side for runners.
Vifaa kwa hatua hii:
Ubao wa pipa la mbao4 vipande
Ubao wa msonobari1 kipande
Ubao wa Mti Mgumu1 kipande
Misumari1 kipandeZana zinazohitajika:
Msumeno wa mkono
Nyundo
Penseli
Tepi ya kupimia4
4
Fit the bobs to the board
Fit the bobs to the board
Fasten one bob to one end of the board. Attach the other at the centre of its crosspiece with a bolt, so it can turn. Fasten the 1-3/4 by 2 in piece, 12 in long, across the top of the board at the front end.
Vifaa kwa hatua hii:
Ubao wa msonobari1 kipande
Ubao wa Mti Mgumu1 kipande
Bolti ya kichwa cha duara1 kipande
Washa bapa2 vipande
Misumari1 kipandeZana zinazohitajika:
Kekee cha mkono chenye ncha
Msumeno wa mkono
Nyundo5
5
Fit the steering rope
Fit the steering rope
Fasten a rope to the knees of the front runners; it steers the sled.
Vifaa kwa hatua hii:
Kamba nene ya pamba1 kipandeZana zinazohitajika:
Kekee cha mkono chenye ncha6
6
Troubleshooting
Troubleshooting
Bobsled troubleshooting.
Flow
Loading...
7
7
History and honest limits
History and honest limits
From "An Inexpensive Bobsled" by H. J. Blacklidge, in **The Boy Mechanic, Book 2**, Popular Mechanics, 1915 (Project Gutenberg 44585; checked on the archive.org scan boymechanicbook200chic2, p. 49). Which end of the board gets the bolted bob, the bolt size and the stave length come only from his figure or are not given. The tools and metric figures are ours.
Vifaa
7- 4 vipandeKishikilia Nafasi
- 1 kipandeKishikilia Nafasi
- 1 kipandeKishikilia Nafasi
- 2 vipandeKishikilia Nafasi
- 1 kipandeKishikilia Nafasi
- 2 vipandeKishikilia Nafasi
- 1 kipandeKishikilia Nafasi
Mchoro huu unatengeneza
Blueprint zinazohusiana
Blueprint hizi zinashiriki maarifa — mbinu, vifaa au kanuni
CC0 Umma Wote
Mchoro huu umetolewa chini ya CC0. Uko huru kunakili, kubadilisha, kusambaza, na kutumia kazi hii kwa madhumuni yoyote, bila kuomba ruhusa.
Saidia Mtengenezaji kwa kununua bidhaa kupitia Mchoro wao ambapo wanapata Kamisheni ya Mtengenezaji iliyowekwa na Wachuuzi, au unda marudio mapya ya Mchoro huu na uiunganishe kama kiungo katika Mchoro wako kuchangia mapato.


