Ushirikiano
SANAA
UREMBO NA USTAWI
UJANJA
UTAMADUNI NA HISTORIA
BURUDANI
MAZINGIRA
CHAKULA NA VINYWAJI
UHANDISI WA KINYUME
SAYANSI
MICHEZO
TEKNOLOJIA
VAZI

Self-Righting Jumping Hurdle: Off-Centre Pivoted Swing Between Two Standards (Boy Mechanic, 1915)
C. C. Fraser's hurdle from The Boy Mechanic, Book 2 (1915): a 36 by 18 in swing hung on long nails slightly off centre between two standards joined by a reach. It turns at the slightest touch of the jumper's foot and rights itself again.
Mwanzo
About 2 hours
Maagizo
1
1
His cutting list in centimetres
His cutting list in centimetres
Inapakia daftari la Jupyter…
2
2
Read The Boy Mechanic, Book 2
Read The Boy Mechanic, Book 2
"The hurdle consists of two standards, a reach, and a swing."
3
3
Make the swing
Make the swing
Nail four pieces about 7/8 in thick and 1-1/2 in wide into a rectangle: two 36 in long and two 18 in long.
Vifaa kwa hatua hii:
Ubao wa msonobari1 kipande
Misumari1 kipandeZana zinazohitajika:
Msumeno wa mkono
Nyundo
Tepi ya kupimia
Penseli4
4
Make the standards and reach
Make the standards and reach
Make each standard of three pieces 7/8 in thick, 3 in wide and 18 in long, nailed firmly together as in his figure, and join their bases with a reach of the same stuff, 36 in long.
Vifaa kwa hatua hii:
Ubao wa msonobari1 kipande
Misumari1 kipandeZana zinazohitajika:
Msumeno wa mkono
Nyundo
Tepi ya kupimia5
5
Hang the swing
Hang the swing
Bore a hole in each standard large enough for a long nail to turn freely but too small for its head to pass, and hang the swing on the nails at its ends, slightly off centre, so it swings at a touch and rights itself.
Vifaa kwa hatua hii:
Misumari1 kipandeZana zinazohitajika:
Kekee cha mkono
Nyundo6
6
Troubleshooting
Troubleshooting
Hurdle troubleshooting.
Flow
Loading...
7
7
History and honest limits
History and honest limits
From "How to Make a Hurdle" by C. C. Fraser, in **The Boy Mechanic, Book 2**, Popular Mechanics, 1915 (Project Gutenberg 44585; checked on the archive.org scan boymechanicbook200chic2, p. 145). How far off centre the pivots go is not given. The tools and metric figures are ours.
Mchoro huu unatengeneza
Blueprint zinazohusiana
Blueprint hizi zinashiriki maarifa — mbinu, vifaa au kanuni
CC0 Umma Wote
Mchoro huu umetolewa chini ya CC0. Uko huru kunakili, kubadilisha, kusambaza, na kutumia kazi hii kwa madhumuni yoyote, bila kuomba ruhusa.
Saidia Mtengenezaji kwa kununua bidhaa kupitia Mchoro wao ambapo wanapata Kamisheni ya Mtengenezaji iliyowekwa na Wachuuzi, au unda marudio mapya ya Mchoro huu na uiunganishe kama kiungo katika Mchoro wako kuchangia mapato.

