Ushirikiano
SANAA
UREMBO NA USTAWI
UJANJA
UTAMADUNI NA HISTORIA
BURUDANI
MAZINGIRA
CHAKULA NA VINYWAJI
UHANDISI WA KINYUME
SAYANSI
MICHEZO
TEKNOLOJIA
VAZI
Wooden Skates: Twin Hardwood Runners Under a Strapped Board (Boy Mechanic, 1915)
Woody

Imeundwa na

Woody

13. Novemba 2026NO
5
0
0
0
0

Wooden Skates: Twin Hardwood Runners Under a Strapped Board (Boy Mechanic, 1915)

F. E. Kennar's wooden skates from The Boy Mechanic, Book 2 (1915), made "to take the place of the usual steel-runner kind" and to prevent sprained ankles: two hardwood runners nailed under a 4 in board, held apart by blocks and bolts, with corner pieces to locate the shoe and straps to hold it. Make two alike.
Mwanzo
About 3 hours

Maagizo

1

His sizes in centimetres

Inapakia daftari la Jupyter…
2

Read The Boy Mechanic, Book 2

"Skates that will take the place of the usual steel-runner kind and which will prevent spraining of the ankles, can be made of a few pieces of 1/2-in. hardwood boards."
3

Cut the runners

From 1/2 in hardwood, cut four runners 2 in wide at the back and 1-1/2 in wide at the front, each 2 in longer than the shoe. Shape the front ends as in his figure.

Vifaa kwa hatua hii:

Ubao wa Mti MgumuUbao wa Mti Mgumu1 kipande

Zana zinazohitajika:

Msumeno wa mkonoMsumeno wa mkono
Msumeno wa kukata mikunjoMsumeno wa kukata mikunjo
Randa ya mkonoRanda ya mkono
PenseliPenseli
Tepi ya kupimiaTepi ya kupimia
4

Assemble each skate

Nail the top edges of a pair of runners to the underside of a board 4 in wide, at its edges. Fasten a block 2 in wide between the runners at the rear and one 1 in wide in front. Bore the runners and put two bolts through, one just behind the front block and one in front of the rear block.

Vifaa kwa hatua hii:

Ubao wa Mti MgumuUbao wa Mti Mgumu1 kipande
MisumariMisumari1 kipande
Bolti ya kichwa cha duaraBolti ya kichwa cha duara2 vipande

Zana zinazohitajika:

Msumeno wa mkonoMsumeno wa mkono
NyundoNyundo
Kekee cha mkonoKekee cha mkono
5

Fit the corner pieces and straps

Fasten four triangular pieces on top, one at each corner, so the heel and toe of the shoe fit between them; if you like, nail a crosspiece in front of the heel. Attach straps to the sides to fasten the skate to the shoe. Make the second skate the same.

Vifaa kwa hatua hii:

Ubao wa Mti MgumuUbao wa Mti Mgumu1 kipande
MisumariMisumari1 kipande
Ukanda wa NgoziUkanda wa Ngozi2 vipande

Zana zinazohitajika:

Msumeno wa mkonoMsumeno wa mkono
NyundoNyundo
Kekee cha mkonoKekee cha mkono
6

Troubleshooting

Wooden skate troubleshooting.

Flow

Loading...
7

History and honest limits

From "Skates Made of Wood" by F. E. Kennar, in **The Boy Mechanic, Book 2**, Popular Mechanics, 1915 (Project Gutenberg 44585; checked on the archive.org scan boymechanicbook200chic2, p. 30). The scan says hardwood boards; the Gutenberg text drops "hardwood". He gives no sizes for the bolts, straps or corner pieces. The tools and metric figures are ours.

Vifaa

4

Zana Zinazohitajika

7

CC0 Umma Wote

Mchoro huu umetolewa chini ya CC0. Uko huru kunakili, kubadilisha, kusambaza, na kutumia kazi hii kwa madhumuni yoyote, bila kuomba ruhusa.

Saidia Mtengenezaji kwa kununua bidhaa kupitia Mchoro wao ambapo wanapata Kamisheni ya Mtengenezaji iliyowekwa na Wachuuzi, au unda marudio mapya ya Mchoro huu na uiunganishe kama kiungo katika Mchoro wako kuchangia mapato.

Majadiliano

(0)

Ingia kujiunga na majadiliano

Inapakia maoni...