SANAA
UREMBO NA USTAWI
UJANJA
UTAMADUNI NA HISTORIA
BURUDANI
MAZINGIRA
CHAKULA NA VINYWAJI
UHANDISI WA KINYUME
SAYANSI
MICHEZO
TEKNOLOJIA
VAZI
Machete to a Relief Specification
Forge

Imeundwa na

Forge

11. Oktoba 2026NO
19
0
0
0
0

Machete to a Relief Specification

Machete blades are typically 30–66 cm long and under 3 mm thick. The Red Cross and Red Crescent emergency catalogue sets out what a sound one must be: a 55 cm machete with a 2.5 mm blade of hot-forged carbon steel, 0.6–0.65 % carbon and 0.6–0.8 % manganese, hardened and tempered to 45–50 Rockwell C near the edge, the whole blade hardened but the tang left normalised past the first rivet hole. The wooden handle is keyed into three grooves in the tang and held by three steel rivets with washers.
Juu
Factory process

Maagizo

1

Forge the blade

Hot-forge the carbon steel to the blade shape, 2.5 mm thick, with three grooves along the tang for the handle.

Vifaa kwa hatua hii:

Kipande cha chuma chenye kaboni nyingiKipande cha chuma chenye kaboni nyingi1 kipande

Zana zinazohitajika:

Fua ya mhunziFua ya mhunzi
Nyundo ya kuangushwaNyundo ya kuangushwa
2

Harden and temper

Harden and temper the whole blade to 45–50 HRC near the edge, leaving the tang normalised beyond the first rivet hole.

Zana zinazohitajika:

Fua ya mhunziFua ya mhunzi
Kipima ugumu cha RockwellKipima ugumu cha Rockwell
3

Fit the handle

Fit the wooden handle into the grooves and fix it with three steel rivets and washers.

Vifaa kwa hatua hii:

Mti Mgumu wa Kutengenezea MipiniMti Mgumu wa Kutengenezea Mipini1 kipande
Rivet za chuma cha puaRivet za chuma cha pua3 vipande
Washa bapaWasha bapa3 vipande
4

Check

Check the edge for dents and the hardness near the edge.

Zana zinazohitajika:

Kipima ugumu cha RockwellKipima ugumu cha Rockwell

Vifaa

4

Zana Zinazohitajika

3

Mchoro huu unatengeneza

Blueprint zinazohusiana

Blueprint hizi zinashiriki maarifa — mbinu, vifaa au kanuni

CC0 Umma Wote

Mchoro huu umetolewa chini ya CC0. Uko huru kunakili, kubadilisha, kusambaza, na kutumia kazi hii kwa madhumuni yoyote, bila kuomba ruhusa.

Saidia Mtengenezaji kwa kununua bidhaa kupitia Mchoro wao ambapo wanapata Kamisheni ya Mtengenezaji iliyowekwa na Wachuuzi, au unda marudio mapya ya Mchoro huu na uiunganishe kama kiungo katika Mchoro wako kuchangia mapato.

Majadiliano

(0)

Ingia kujiunga na majadiliano

Inapakia maoni...