Ushirikiano
SANAA
UREMBO NA USTAWI
UJANJA
UTAMADUNI NA HISTORIA
BURUDANI
MAZINGIRA
CHAKULA NA VINYWAJI
UHANDISI WA KINYUME
SAYANSI
MICHEZO
TEKNOLOJIA
VAZI
Hand Drill from an Old Egg Beater and a Pegging-Awl Chuck (Boy Mechanic, 1913)
Forge

Imeundwa na

Forge

14. Novemba 2026NO
11
0
0
0
0

Hand Drill from an Old Egg Beater and a Pegging-Awl Chuck (Boy Mechanic, 1913)

A light hand drill for wood or metal: the geared crank of a rotary egg beater drives a chuck taken from a shoemaker's pegging awl, and broken sewing-machine needles ground to a point make the drills.
Kati
Two hours

Maagizo

1

Read the Boy Mechanic

"With these two pieces of apparatus I made a hand drill for light work in wood or metal."
2

Strip the beater

Take the long wire beater out of the egg-beater frame and solder a wire nail (C) to the frame (D) in its place. Cut off the flat arms and shape them as at E.

Vifaa kwa hatua hii:

Kipigo mayai cha kuzungushaKipigo mayai cha kuzungusha1 kipande
MisumariMisumari1 kipande
Lehemu ya bati na risasiLehemu ya bati na risasi1 kipande

Zana zinazohitajika:

Koleo la Mdomo BapaKoleo la Mdomo Bapa
Msumeno wa chumaMsumeno wa chuma
Chuma cha kulehemiaChuma cha kulehemia
3

Mount the small gear

Drill out the hole in the small gear (G), fit a tube (F) in it and solder the tube to both the gear and the arms E.

Vifaa kwa hatua hii:

Neli ya shaba nyeupeNeli ya shaba nyeupe1 kipande
Lehemu ya bati na risasiLehemu ya bati na risasi1 kipande

Zana zinazohitajika:

Kekee cha mkonoKekee cha mkono
Chuma cha kulehemiaChuma cha kulehemia
4

Assemble

Slip the tube, gear and arms over the nail, add a washer, cut the nail to length and rivet it over for a loose but neat fit. Solder the stem (B) of the awl's chuck (A) to the ends of the arms.

Vifaa kwa hatua hii:

Washa bapaWasha bapa1 kipande
Uma wa kutoboa (ushindilio)Uma wa kutoboa (ushindilio)1 kipande
Lehemu ya bati na risasiLehemu ya bati na risasi1 kipande

Zana zinazohitajika:

NyundoNyundo
Chuma cha kulehemiaChuma cha kulehemia
5

Make the drills

Break sewing-machine needles off above the eye and grind the ends to a drill point.

Vifaa kwa hatua hii:

Sindano za cherehaniSindano za cherehani1 kipande

Zana zinazohitajika:

Jiwe la kunoa la gurudumuJiwe la kunoa la gurudumu
6

Troubleshooting

Egg-beater drill troubleshooting.

Flow

Loading...
7

History and honest limits

From **The Boy Mechanic, Book 1** (Popular Mechanics, 1913), p. 444, by R. B. J. (checked on the archive.org scan boymechanic0000unse_n5a8). The pegging awl is listed under the general Awl head.

Vifaa

7

Zana Zinazohitajika

6

Blueprint zinazohusiana

Blueprint hizi zinashiriki maarifa — mbinu, vifaa au kanuni

CC0 Umma Wote

Mchoro huu umetolewa chini ya CC0. Uko huru kunakili, kubadilisha, kusambaza, na kutumia kazi hii kwa madhumuni yoyote, bila kuomba ruhusa.

Saidia Mtengenezaji kwa kununua bidhaa kupitia Mchoro wao ambapo wanapata Kamisheni ya Mtengenezaji iliyowekwa na Wachuuzi, au unda marudio mapya ya Mchoro huu na uiunganishe kama kiungo katika Mchoro wako kuchangia mapato.

Majadiliano

(0)

Ingia kujiunga na majadiliano

Inapakia maoni...