Ushirikiano
SANAA
UREMBO NA USTAWI
UJANJA
UTAMADUNI NA HISTORIA
BURUDANI
MAZINGIRA
CHAKULA NA VINYWAJI
UHANDISI WA KINYUME
SAYANSI
MICHEZO
TEKNOLOJIA
VAZI
Lead-Lined Tank: a Steel Acid Tank with an Antimonial Lead Lining (Bell, 1923)
A riveted steel tank lined with sheet lead, for weak sulphuric acid, which eats bare steel. The lead hangs from the top angle and is held to the shell by steel straps covered with lead burned to the lining.
Bell's example (Fig. 170) is a vertical tank 15 ft across and 10 ft high, lined with 6 % antimony lead at 7 1/2 lb per sq ft.
Source: H. S. Bell, American Petroleum Refining (1923), pp. 305-306. Picture: Fig. 170 of the book.
Mtaalamu
Unknown
Maagizo
1
1
Build the steel tank
Build the steel tank
Build the shell as a standard riveted vertical tank, with plate at least 3/8 in thick. Drive the rivets with flat heads 1/16 to 1/8 in high inside, and leave out an occasional rivet so leaks in the lining can be found. The shell plates need not be bevelled or caulked. If you can, stand it on concrete piers with steel I-beams so the bottom can be inspected, and protect the concrete with coal tar or petroleum pitch.
Vifaa kwa hatua hii:
Bamba la chuma laini1 3/8 in min.
Rivet za chuma cha pua1 kipandeZana zinazohitajika:
Nyundo ya riveti
Lami nzito ya makaa ya mawe
Vipimo visivyojulikana2
2
Cut the lead
Cut the lead
Use chemical lead at 8 lb per sq ft, or 6 % antimony lead at 7 1/2 lb per sq ft. For Bell's 15 x 10 ft tank: 7 sheets 10 ft 11 in x 7 ft 2 in, 7 sheets 10 ft 11 in x 7 in, and 2 half-circle sheets of 8 ft radius for the bottom.
Vifaa kwa hatua hii:
Bati la risasi16 sheets, 6 % antimony, 7 1/2 lb/sq ftZana zinazohitajika:
Mkasi wa bati3
3
Hang and strap the lining
Hang and strap the lining
Dress the lead over the top angle to carry it. Hold it to the shell with straps of round-edged tire steel (Fig. 170: seven straps 2 1/2 x 3/8 in, about 9 ft long), no more than 8 ft apart round the shell; round edges won't cut the lead while it is dressed. Bolt the straps through the shell with 1/2 in bolts, heads countersunk inside.
Vifaa kwa hatua hii:
Pau Bapa la Chuma Laini7 2 1/2 x 3/8 in, about 9 ft
Bolti ya kichwa cha pembe sita - daraja 8.81 1/2 in, number not givenZana zinazohitajika:
Nyundo ya mbao4
4
Burn the seams and cover the straps
Burn the seams and cover the straps
Burn (fuse) the lead seams together. Burn a narrow strip of lead over each strap onto the lining, so no steel or bolt head is left bare to the acid. Not given: the burning tool.
Vifaa kwa hatua hii:
Bati la risasi1 cover stripsZana zinazohitajika:
MwengeVifaa
5- 1 3/8 in min.Kishikilia Nafasi
- 1 kipandeKishikilia Nafasi
- 1 cover stripsKishikilia Nafasi
- 7 2 1/2 x 3/8 in, about 9 ftKishikilia Nafasi
- 1 1/2 in, number not givenKishikilia Nafasi
Zana Zinazohitajika
6- Kishikilia Nafasi
- Kishikilia Nafasi
- Kishikilia Nafasi
- Kishikilia Nafasi
- Kishikilia Nafasi
- Kishikilia Nafasi
Vifaa vya Michoro Iliyounganishwa
Mchoro huu unatengeneza
CC0 Umma Wote
Mchoro huu umetolewa chini ya CC0. Uko huru kunakili, kubadilisha, kusambaza, na kutumia kazi hii kwa madhumuni yoyote, bila kuomba ruhusa.
Saidia Mtengenezaji kwa kununua bidhaa kupitia Mchoro wao ambapo wanapata Kamisheni ya Mtengenezaji iliyowekwa na Wachuuzi, au unda marudio mapya ya Mchoro huu na uiunganishe kama kiungo katika Mchoro wako kuchangia mapato.