Ushirikiano
SANAA
UREMBO NA USTAWI
UJANJA
UTAMADUNI NA HISTORIA
BURUDANI
MAZINGIRA
CHAKULA NA VINYWAJI
UHANDISI WA KINYUME
SAYANSI
MICHEZO
TEKNOLOJIA
VAZI
Cigar-Box Hawaiian Ukulele: Spanish-Cedar Body, 11 in Neck and Frets by the Rule of Eighteen (Boy Mechanic, 1919)
Woody

Imeundwa na

Woody

14. Novemba 2026NO
8
0
0
0
0

Cigar-Box Hawaiian Ukulele: Spanish-Cedar Body, 11 in Neck and Frets by the Rule of Eighteen (Boy Mechanic, 1919)

S. H. Samuels's ukulele from The Boy Mechanic, Book 3 (1919), made for 30 cents: a Spanish-cedar cigar box rebuilt as a 9 x 6 in body with a 2-1/2 in sound hole, an 11 in cedar or mahogany neck, a notched hardwood bridge, and aluminium frets set by the old rule of 1/18 on a 13 in string length.
Kati
About 2 days

Maagizo

1

Fret table

Inapakia daftari la Jupyter…
2

Read The Boy Mechanic, Book 3

"The size of this instrument makes it especially suited to the cigar-box type of body construction."
3

Rebuild the box as the body

Take a good Spanish-cedar cigar box about 2-1/2 by 6 by 9 in, soak off the paper without marring the wood, take it apart and trim edges with too many or broken nail holes. Fit the parts so top and bottom rest against the sides and ends, the ends between the sides (Fig. 2; drawn 9 by 6 by 2-1/4 in). Cut a 2-1/2 in hole in the top 3-3/4 in from the neck end. Make corner strips A 1/4 in square and strips B 1/4 by 5/8 by 4-1/2 in for under the top and on the bottom.

Vifaa kwa hatua hii:

Ubao wa mwereziUbao wa mwerezi1 kipande

Zana zinazohitajika:

Msumeno wa kukata mikunjoMsumeno wa kukata mikunjo
Kisu cha ngoziKisu cha ngozi
Randa ya mkonoRanda ya mkono
DiraDira
RulaRula
4

Make the neck, nut and bridge

Cut the neck from Spanish cedar or mahogany, 11 in long, best in one piece (or with the peg extension and the wide body end glued on and doweled): head 4-1/2 in, fingerboard 6-5/8 in from the 1/8 in nut, 1-1/4 in wide at the nut and 1-3/4 in at the body, heel 7/16 in, section 7/8 by 2-1/4 in as drawn (Fig. 3). Make the nut D of mahogany or walnut with the grain lengthwise, notched for the strings as spaced. Make the bridge C of hard wood, 2-1/2 in long and 1/2 in high, hollowed under the notched edge, with a metal string contact.

Vifaa kwa hatua hii:

Ubao wa Mti MgumuUbao wa Mti Mgumu1 kipande
Kijiti cha mbao (dauli)Kijiti cha mbao (dauli)1 kipande
Gundi ya wanyamaGundi ya wanyama1 kipande
Utepe wa shaba-njanoUtepe wa shaba-njano1 kipande

Zana zinazohitajika:

Msumeno wa mkonoMsumeno wa mkono
Msumeno wa kukata mikunjoMsumeno wa kukata mikunjo
Kisu cha ngoziKisu cha ngozi
Tupa (Tupa ya Mkono)Tupa (Tupa ya Mkono)
Kekee cha mkonoKekee cha mkono
5

Fret the fingerboard

Measure the string length from the bridge contact to the nut (13 in here). Set the first fret 1/18 of that distance from the nut, the second 1/18 of the distance from the first fret to the bridge, and so on (notebook). Cut grooves 1/8 in deep and drive in frets of aluminium (or brass) 1/16 by 3/16 in, tight enough to need no fastening.

Vifaa kwa hatua hii:

Utepe wa shaba-njanoUtepe wa shaba-njano1 kipande

Zana zinazohitajika:

Msumeno wa mkonoMsumeno wa mkono
Msumeno wa chumaMsumeno wa chuma
Tupa (Tupa ya Mkono)Tupa (Tupa ya Mkono)
RulaRula
PenseliPenseli
NyundoNyundo
6

Assemble and finish

Glue the body's end to the neck with animal glue, reinforced by screws, its upper edge parallel with the fingerboard and the fingerboard flush with the top. Glue the body (without the top) to that end; when dry, glue in the strips, bridge and finally the top. Clean, sandpaper, stain and shellac or varnish. Fit tuning pegs (bought or made) and a set of strings.

Vifaa kwa hatua hii:

Gundi ya wanyamaGundi ya wanyama1 kipande
Parafujo za mbaoParafujo za mbao1 kipande
Sandarusi (karatasi ya kusugua)Sandarusi (karatasi ya kusugua)1 kipande
Vanishi ya shelakiVanishi ya shelaki1 kipande
Vigingi vya Kupanga SautiVigingi vya Kupanga Sauti4 vipande
Nyuzi za ukuleleNyuzi za ukulele1 kipande

Zana zinazohitajika:

Kibano cha upauKibano cha upau
Bisibisi bapaBisibisi bapa
Brashi pana ya rangiBrashi pana ya rangi
7

Troubleshooting

Ukulele troubleshooting.

Flow

Loading...
8

History and honest limits

From "A Homemade Hawaiian Ukulele" by S. H. Samuels, in **The Boy Mechanic, Book 3**, Popular Mechanics, 1919 (Project Gutenberg 71856; checked on the archive.org scan boymechanic0003unse, pp. 358-359). He gives the box as about 2-1/2 in deep; his drawing shows 2-1/4 in. He names no stain and no string type. The fret table, its equal-temperament comparison and the metric figures are ours.

Vifaa

10

Zana Zinazohitajika

14

CC0 Umma Wote

Mchoro huu umetolewa chini ya CC0. Uko huru kunakili, kubadilisha, kusambaza, na kutumia kazi hii kwa madhumuni yoyote, bila kuomba ruhusa.

Saidia Mtengenezaji kwa kununua bidhaa kupitia Mchoro wao ambapo wanapata Kamisheni ya Mtengenezaji iliyowekwa na Wachuuzi, au unda marudio mapya ya Mchoro huu na uiunganishe kama kiungo katika Mchoro wako kuchangia mapato.

Majadiliano

(0)

Ingia kujiunga na majadiliano

Inapakia maoni...