SANAA
UREMBO NA USTAWI
UJANJA
UTAMADUNI NA HISTORIA
BURUDANI
MAZINGIRA
CHAKULA NA VINYWAJI
UHANDISI WA KINYUME
SAYANSI
MICHEZO
TEKNOLOJIA
VAZI
Saw Handle Rivets with Countersunk Heads
Youblob · CC0
Forge

Imeundwa na

Forge

14. Oktoba 2026NO
18
0
0
0
0

Saw Handle Rivets with Countersunk Heads

A hand saw blade is fixed in its wooden handle by rivets through both. Hodgson (1883) preferred plain beech handles with the rivets flush or countersunk: lighter, easier to handle, and no heads standing out to dull other saws in the chest. Head short steel rivets with a cone-shaped head in a nail header. The picture: our diagram, a countersunk rivet and two set through handle and blade.
Kati
An hour or two

Maagizo

1

Countersink the header

Use a nail header with a hole the size of the rivet shank, its top edge filed out into a cone (90°, our angle).

Zana zinazohitajika:

Kibamba cha kutengeneza vichwa vya misumariKibamba cha kutengeneza vichwa vya misumari
Tupa ya chumaTupa ya chuma
2

Nick the rod

Heat a mild steel rod of the shank size, and nick it nearly through on the hardy at the shank length plus the head allowance (step 5).

Vifaa kwa hatua hii:

Ufito wa chuma lainiUfito wa chuma laini0.5 m
MkaaMkaa1 as required

Zana zinazohitajika:

Fua ya mhunziFua ya mhunzi
FuaweFuawe
Patasi ya kukata kwenye fuawePatasi ya kukata kwenye fuawe
Koleo za mhunziKoleo za mhunzi
Glavu za kulehemuGlavu za kulehemu
Miwani ya usalamaMiwani ya usalama
3

Head it

Drop the hot end into the header and hammer the standing stock down into the cone until it fills it. Snap it off at the nick and file any metal spread past the cone off flat.

Zana zinazohitajika:

Kibamba cha kutengeneza vichwa vya misumariKibamba cha kutengeneza vichwa vya misumari
FuaweFuawe
Nyundo yenye kichwa cha msalabaNyundo yenye kichwa cha msalaba
Koleo za mhunziKoleo za mhunzi
Glavu za kulehemuGlavu za kulehemu
Miwani ya usalamaMiwani ya usalama
4

Clean up

Let them cool without hardening; the tail is peened into a countersink on the far side of the handle. File off burrs so each shank slips into its hole.

Zana zinazohitajika:

Tupa ya chumaTupa ya chuma
5

Rod for a countersunk head

Inapakia daftari la Jupyter…

Vifaa

2
  • 2
    Ufito wa chuma laini
    0.5 m
    Kishikilia Nafasi
  • 2
    Mkaa
    1 as required
    Kishikilia Nafasi

Zana Zinazohitajika

9

Mchoro huu unatengeneza

Thumbnail
Kishikilia nafasi

Riveti za mpini wa msumeno

Free

54
0
1

Blueprint zinazohusiana

Blueprint hizi zinashiriki maarifa — mbinu, vifaa au kanuni

Steel Rivets Forged in a Nail Header

Steel Rivets Forged in a Nail Header

na ForgeNO

Mhunzi

20
0
0
0
0
0
Hand Saw: Plate, Teeth, Temper and Handle

Hand Saw: Plate, Teeth, Temper and Handle

na WoodyNO

Uchimbaji chuma

35
0
0
0
0
0

CC0 Umma Wote

Mchoro huu umetolewa chini ya CC0. Uko huru kunakili, kubadilisha, kusambaza, na kutumia kazi hii kwa madhumuni yoyote, bila kuomba ruhusa.

Saidia Mtengenezaji kwa kununua bidhaa kupitia Mchoro wao ambapo wanapata Kamisheni ya Mtengenezaji iliyowekwa na Wachuuzi, au unda marudio mapya ya Mchoro huu na uiunganishe kama kiungo katika Mchoro wako kuchangia mapato.

Majadiliano

(0)

Ingia kujiunga na majadiliano

Inapakia maoni...