កិច្ចសហប្រតិបត្តិការ
សិល្បៈ
សម្រស់ និង សុខុមាលភាព
សិប្បកម្ម
វប្បធម៌ និង ប្រវត្តិសាស្ត្រ
ការកម្សាន្ត
បរិស្ថាន
ម្ហូប និង ភេសជ្ជៈ
វិស្វកម្មបញ្ច្រាស
វិទ្យាសាស្ត្រ
កីឡា
បច្ចេកវិទ្យា
ប្រដាប់ដែលស្លៀក
Aluminium Ingots from Scrap Cans
English
Forge

បង្កើតដោយ

Forge

11. តុលា 2026NO
37
0
0
0
0

Aluminium Ingots from Scrap Cans

Aluminium melts at about 660 °C, within reach of a charcoal furnace with forced air. Drink cans are mostly aluminium alloy with a thin plastic coating and paint; melted down, the coating burns off and the oxide and dirt float to the top as dross, which is skimmed before the clean metal is poured into a mould. Cans are thin and oxidise a lot, so the yield is well below the cans' weight: weigh both and see. Water meeting molten aluminium turns to steam instantly and throws metal: every can, tool and mould must be dry.
មធ្យម
Half a day

ការណែនាំ

1

Prepare the cans

Empty, rinse and fully dry the cans, then crush them flat. Weigh them.

សម្ភារៈសម្រាប់ជំហាននេះ៖

កំប៉ុងភេសជ្ជៈអាលុយមីញ៉ូម (ទទេ)កំប៉ុងភេសជ្ជៈអាលុយមីញ៉ូម (ទទេ)3 គក

ឧបករណ៍ដែលត្រូវការ៖

ជញ្ជីងថ្លឹងជញ្ជីងថ្លឹង
2

Melt

Heat the crucible in the charcoal furnace with forced air until red, then feed in crushed cans a few at a time, pushing each under the melt.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ធ្យូងធ្យូង15 គក

ឧបករណ៍ដែលត្រូវការ៖

ឡធ្យូងឡធ្យូង
ឆ្នាំងដីធន់នឹងភ្លើងឆ្នាំងដីធន់នឹងភ្លើង
ដង្កាប់ឆ្នាំងរំលាយដង្កាប់ឆ្នាំងរំលាយ
អាវការពារស្បែកអាវការពារស្បែក
ស្រោមដៃផ្សារស្រោមដៃផ្សារ
វ៉ែនតាសុវត្ថិភាពវ៉ែនតាសុវត្ថិភាព
ស្បែកជើងសុវត្ថិភាពក្បាលដែកស្បែកជើងសុវត្ថិភាពក្បាលដែក
3

Skim the dross

When all is melted, skim the grey dross off the top with a dry, preheated ladle.

ឧបករណ៍ដែលត្រូវការ៖

វែកមានរន្ធវែកមានរន្ធ
4

Pour

Over a bed of dry sand, lift the crucible with the tongs and pour into a preheated, dry ingot mould in one steady stream.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ខ្សាច់ខ្សាច់20 គក

ឧបករណ៍ដែលត្រូវការ៖

ដង្កាប់ឆ្នាំងរំលាយដង្កាប់ឆ្នាំងរំលាយ
ពុម្ពចាក់ដុំលោហៈពុម្ពចាក់ដុំលោហៈ
5

Weigh the yield

When cold, knock the ingots out and weigh them against the cans.

ឧបករណ៍ដែលត្រូវការ៖

ជញ្ជីងថ្លឹងជញ្ជីងថ្លឹង
6

Troubleshooting

Can melting troubleshooting.

Flow

Loading...

សម្ភារៈ

3

ឧបករណ៍ចាំបាច់

10

ប្លង់ពាក់ព័ន្ធ

ប្លង់ទាំងនេះចែករំលែកចំណេះដឹង — បច្ចេកទេស សម្ភារៈ ឬគោលការណ៍

CC0 សាធារណៈ

ប្លង់នេះត្រូវបានចេញផ្សាយក្រោម CC0។ អ្នកមានសិទ្ធិចម្លង កែប្រែ ចែកចាយ និងប្រើប្រាស់ដោយមិនចាំបាច់សុំអនុញ្ញាត។

គាំទ្រអ្នកបង្កើតដោយទិញផលិតផលតាមរយៈប្លង់របស់ពួកគេ ដែលពួកគេទទួលបាន កម្រៃជើងសារអ្នកបង្កើត កំណត់ដោយអ្នកលក់ ឬបង្កើតកំណែថ្មីនៃប្លង់នេះ ហើយបញ្ចូលជាការតភ្ជាប់ក្នុងប្លង់របស់អ្នកដើម្បីចែករំលែកចំណូល។

ការពិភាក្សា

(0)

ចូល ដើម្បីចូលរួមពិភាក្សា

កំពុងផ្ទុកមតិ...