សិល្បៈ
សម្រស់ និង សុខុមាលភាព
សិប្បកម្ម
វប្បធម៌ និង ប្រវត្តិសាស្ត្រ
ការកម្សាន្ត
បរិស្ថាន
ម្ហូប និង ភេសជ្ជៈ
វិស្វកម្មបញ្ច្រាស
វិទ្យាសាស្ត្រ
កីឡា
បច្ចេកវិទ្យា
ប្រដាប់ដែលស្លៀក
Barium Ferrite Disc Magnet: 0.4 mol BaCO3 to 3.7 mol Iron Oxide, 1330 °C (Went, Philips 1956, Ex. 6)
Charlie

បង្កើតដោយ

Charlie

28. តុលា 2026DE
1
0
0
0
0

Barium Ferrite Disc Magnet: 0.4 mol BaCO3 to 3.7 mol Iron Oxide, 1330 °C (Went, Philips 1956, Ex. 6)

A barium ferrite with 0.4 mol barium carbonate to 3.7 mol iron oxide, made as in Example 4 and passed through a 1330 °C furnace in 20 minutes. Went's rod held 1,200 gauss with a coercive force of 1,950 oersted. Source: J. J. Went, G. W. van Oosterhout and E. W. Gorter (Philips), US 2,762,777 (1956), Example 6. They sintered rods; discs and the magnetising are ours. Picture: ferrite magnets, Omegatron, Wikimedia Commons, CC BY-SA 3.0.
កម្រិតខ្ពស់
2 days

ការណែនាំ

1

Weigh barium carbonate and iron oxide

Weigh 79.4 g barium carbonate (0.4 mol) and 580.9 g ferric oxide (3.7 mol). Barium carbonate is poisonous if swallowed: gloves and a dust respirator.

សម្ភារៈសម្រាប់ជំហាននេះ៖

កាបូណាតបារីយ៉ូម (វីធើរីត)កាបូណាតបារីយ៉ូម (វីធើរីត)79.4 ក្រ
អុកស៊ីដហ្វែរិកអុកស៊ីដហ្វែរិក580.9 ក្រ

ឧបករណ៍ដែលត្រូវការ៖

ជញ្ជីងចានពីរជញ្ជីងចានពីរ
ស្រោមដៃកៅស៊ូស្រោមដៃកៅស៊ូ
ម៉ាស់ការពារផ្លូវដង្ហើម P100ម៉ាស់ការពារផ្លូវដង្ហើម P100
2

Mill with alcohol 15.5 hours, dry and sieve

As in Example 4: grind the mixture with alcohol in a ball mill for 15.5 hours, then dry it and sieve it.

ឧបករណ៍ដែលត្រូវការ៖

ម៉ាស៊ីនកិនគ្រាប់ដែកម៉ាស៊ីនកិនគ្រាប់ដែក
អេតាណុល - ថ្នាក់មន្ទីរពិសោធន៍, 95 %អេតាណុល - ថ្នាក់មន្ទីរពិសោធន៍, 95 %
ឡសម្ងួតឡសម្ងួត
ចម្រោះគ្រើមចម្រោះគ្រើម
3

Knead with a binder and form

Mix 300 g of the powder with a binder such as polyvinyl alcohol (Went names it or nitrocellulose) into a kneadable mass. The patent extrudes rods about 3 mm across; ours: press discs at 1.5 tonnes per cm², as in its other examples. Dry them in air for about 24 hours.

ឧបករណ៍ដែលត្រូវការ៖

ម្សៅប៉ូលីវីនីលអាល់កុលម្សៅប៉ូលីវីនីលអាល់កុល
ម៉ាស៊ីនសង្កត់អ៊ីដ្រូលិកម៉ាស៊ីនសង្កត់អ៊ីដ្រូលិក
ពុម្ពសង្កត់ថាសពុម្ពសង្កត់ថាស
ឡសម្ងួតឡសម្ងួត
4

Pass through a 1330 °C zone in 20 minutes

Sinter in air at 1330 °C by passing the pieces through a 10 cm hot zone at 5 mm per minute: 20 minutes in the heat.

ឧបករណ៍ដែលត្រូវការ៖

ឡបំពង់ឡបំពង់
ស្រោមដៃធន់កម្តៅស្រោមដៃធន់កម្តៅ
5

Magnetise the discs

The patent gives no magnetising method. Ours: lay a disc with its faces against the poles of a strong electromagnet, switch the current on, then off. Find which face is north with a compass.

ឧបករណ៍ដែលត្រូវការ៖

អេឡិចត្រូម៉ាញេទិចអេឡិចត្រូម៉ាញេទិច
ត្រីវិស័យត្រីវិស័យ

សម្ភារៈ

2

ឧបករណ៍ចាំបាច់

14

ប្លង់ពាក់ព័ន្ធ

ប្លង់ទាំងនេះចែករំលែកចំណេះដឹង — បច្ចេកទេស សម្ភារៈ ឬគោលការណ៍

CC0 សាធារណៈ

ប្លង់នេះត្រូវបានចេញផ្សាយក្រោម CC0។ អ្នកមានសិទ្ធិចម្លង កែប្រែ ចែកចាយ និងប្រើប្រាស់ដោយមិនចាំបាច់សុំអនុញ្ញាត។

គាំទ្រអ្នកបង្កើតដោយទិញផលិតផលតាមរយៈប្លង់របស់ពួកគេ ដែលពួកគេទទួលបាន កម្រៃជើងសារអ្នកបង្កើត កំណត់ដោយអ្នកលក់ ឬបង្កើតកំណែថ្មីនៃប្លង់នេះ ហើយបញ្ចូលជាការតភ្ជាប់ក្នុងប្លង់របស់អ្នកដើម្បីចែករំលែកចំណូល។

ការពិភាក្សា

(0)

ចូល ដើម្បីចូលរួមពិភាក្សា

កំពុងផ្ទុកមតិ...