សិល្បៈ
សម្រស់ និង សុខុមាលភាព
សិប្បកម្ម
វប្បធម៌ និង ប្រវត្តិសាស្ត្រ
ការកម្សាន្ត
បរិស្ថាន
ម្ហូប និង ភេសជ្ជៈ
វិស្វកម្មបញ្ច្រាស
វិទ្យាសាស្ត្រ
កីឡា
បច្ចេកវិទ្យា
ប្រដាប់ដែលស្លៀក
Billhook Forged from Tool Steel with an Ash Handle
Forge

បង្កើតដោយ

Forge

14. តុលា 2026NO
25
0
0
0
0

Billhook Forged from Tool Steel with an Ash Handle

The billhook is the hedgelayer's and coppicer's blade for saplings and small branches. The blade is straight by the handle and curves more and more toward the end, and it is sharpened on the inside of the curve. Forge a 20–25 cm blade with a tang, harden and temper it, and fit an ash handle. The picture: a Devon pattern billhook made by W. Gilpin in 1918.
មធ្យម
A day

ការណែនាំ

1

Draw the tang

Heat the bar and draw a tapered tang at one end, a little longer than the handle.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ដែករបារឧបករណ៍រាបស្មើដែករបារឧបករណ៍រាបស្មើ1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

ឡជាងដែកឡជាងដែក
ទាំងជល់ (កំណាត់ដែក)ទាំងជល់ (កំណាត់ដែក)
ញញួរស្នាមឆ្លងញញួរស្នាមឆ្លង
ដង្កៀបជាងដែកដង្កៀបជាងដែក
ស្រោមដៃផ្សារស្រោមដៃផ្សារ
វ៉ែនតាសុវត្ថិភាពវ៉ែនតាសុវត្ថិភាព
2

Forge the hook

Draw the blade to 20–25 cm and thin it toward the edge side. Curve the end over the horn, straight near the handle and curving more toward the tip.

ឧបករណ៍ដែលត្រូវការ៖

ឡជាងដែកឡជាងដែក
ទាំងជល់ (កំណាត់ដែក)ទាំងជល់ (កំណាត់ដែក)
ញញួរស្នាមឆ្លងញញួរស្នាមឆ្លង
ដង្កៀបជាងដែកដង្កៀបជាងដែក
ស្រោមដៃផ្សារស្រោមដៃផ្សារ
វ៉ែនតាសុវត្ថិភាពវ៉ែនតាសុវត្ថិភាព
3

File the edge

Let it cool slowly in the ashes, then file a bevel on the inside of the curve only. Keep it fairly thick so it does not bind in green wood.

ឧបករណ៍ដែលត្រូវការ៖

ដែកឆាបលោហៈដែកឆាបលោហៈ
4

Harden and temper

Heat the blade to cherry red and quench in water. Polish it bright, then warm the back and quench again when the edge turns purple, tougher than a knife.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ទឹកទឹក10 លីត្រ

ឧបករណ៍ដែលត្រូវការ៖

ឡជាងដែកឡជាងដែក
ធុងជ្រលក់ត្រជាក់ធុងជ្រលក់ត្រជាក់
ដង្កៀបជាងដែកដង្កៀបជាងដែក
ស្រោមដៃផ្សារស្រោមដៃផ្សារ
វ៉ែនតាសុវត្ថិភាពវ៉ែនតាសុវត្ថិភាព
5

Ash handle

Saw and shave an ash handle 12–15 cm long. Drill it, burn the hot tang in, and peen the tang end over the butt. Oil the handle.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ដុំឈើអាសដុំឈើអាស1 ដុំ
ប្រេងលីនស៊ីតប្រេងលីនស៊ីត0.02 លីត្រ

ឧបករណ៍ដែលត្រូវការ៖

រណារដៃរណារដៃ
កាំបិតទាញពីរដងកាំបិតទាញពីរដង
ស្វានដៃស្វានដៃ
ឡជាងដែកឡជាងដែក
ញញួរស្នាមឆ្លងញញួរស្នាមឆ្លង
ដង្កៀបជាងដែកដង្កៀបជាងដែក
6

Sharpen

Hone the bevel on the stone and take the burr off the flat side.

ឧបករណ៍ដែលត្រូវការ៖

ថ្មសម្លៀងគ្រើម ១០០០ថ្មសម្លៀងគ្រើម ១០០០
7

Edge angle

កំពុងផ្ទុកសៀវភៅ Jupyter…

សម្ភារៈ

4

ឧបករណ៍ចាំបាច់

12

ប្លង់ពាក់ព័ន្ធ

ប្លង់ទាំងនេះចែករំលែកចំណេះដឹង — បច្ចេកទេស សម្ភារៈ ឬគោលការណ៍

CC0 សាធារណៈ

ប្លង់នេះត្រូវបានចេញផ្សាយក្រោម CC0។ អ្នកមានសិទ្ធិចម្លង កែប្រែ ចែកចាយ និងប្រើប្រាស់ដោយមិនចាំបាច់សុំអនុញ្ញាត។

គាំទ្រអ្នកបង្កើតដោយទិញផលិតផលតាមរយៈប្លង់របស់ពួកគេ ដែលពួកគេទទួលបាន កម្រៃជើងសារអ្នកបង្កើត កំណត់ដោយអ្នកលក់ ឬបង្កើតកំណែថ្មីនៃប្លង់នេះ ហើយបញ្ចូលជាការតភ្ជាប់ក្នុងប្លង់របស់អ្នកដើម្បីចែករំលែកចំណូល។

ការពិភាក្សា

(0)

ចូល ដើម្បីចូលរួមពិភាក្សា

កំពុងផ្ទុកមតិ...