កិច្ចសហប្រតិបត្តិការ
សិល្បៈ
សម្រស់ និង សុខុមាលភាព
សិប្បកម្ម
វប្បធម៌ និង ប្រវត្តិសាស្ត្រ
ការកម្សាន្ត
បរិស្ថាន
ម្ហូប និង ភេសជ្ជៈ
វិស្វកម្មបញ្ច្រាស
វិទ្យាសាស្ត្រ
កីឡា
បច្ចេកវិទ្យា
ប្រដាប់ដែលស្លៀក

Knock-Down Footstool: Bolted Metal Legs and Rails Under a Screwed-On Wooden Top (Bolens, 1900)
Harry W. Bolens of Port Washington, Wisconsin, received US 640,265, dated 2 January 1900, for a footstool whose base comes apart: four metal corner legs and four rails bolted together, with a wooden top screwed on through lugs on the legs. It packs flat for storage and shipping.
His legs were ornamental castings; ours are bent from steel angle. All sizes are ours.
ចាប់ផ្តើម
About 4 hours
ការណែនាំ
1
1
Cut list
Cut list
កំពុងផ្ទុកសៀវភៅ Jupyter…
2
2
Read US 640,265
Read US 640,265
"The above-described base has the advantage of being a knockdown structure, and thus I provide for economical storage and transportation."
3
3
Make the legs
Make the legs
Cut four legs of steel angle to the notebook's length, his corner legs A. At the top of each, cut and bend a small tab inward to make the flange and lug (his b and c), and drill the lug for a top screw. File off sharp edges.
សម្ភារៈសម្រាប់ជំហាននេះ៖
ដែកជ្រុងពីដែកទន់1 ដុំឧបករណ៍ដែលត្រូវការ៖
រណារកាត់ដែក
ដង្កាប់តុ
ញញួរក្បាលមូល
ម៉ាស៊ីនចោះឈរ
សំណុំក្បាលខួង
សំណុំដែកឆាប4
4
Make the rails
Make the rails
Cut two side rails and two end rails of flat bar, his rails B. Bend each end slightly (his offset ends) so it lies flush inside the leg's angle. Drill matching holes through rail ends and legs.
សម្ភារៈសម្រាប់ជំហាននេះ៖
ដែកបន្ទះរាបថែបទន់1 ដុំឧបករណ៍ដែលត្រូវការ៖
រណារកាត់ដែក
ដង្កាប់តុ
ម៉ាស៊ីនចោះឈរ
សំណុំក្បាលខួង5
5
Bolt the base
Bolt the base
Bolt each rail end to its leg with a bolt and nut, his bolts f and nuts g. Check the base stands square and level.
សម្ភារៈសម្រាប់ជំហាននេះ៖
ការប្រមូលផ្ដុំប៊ូឡុងប្រាំមួយជ្រុង1 ដុំឧបករណ៍ដែលត្រូវការ៖
សោរបង្វិលកែតម្រូវបាន6
6
Fit the top
Fit the top
Cut and sand a hardwood top, his top C. Set it on the base and drive a screw up through each leg's lug into it, his screws h. Upholster it if you like, as he allows.
សម្ភារៈសម្រាប់ជំហាននេះ៖
ក្តារឈើរឹង1 ដុំ
វីសឈើ1 ដុំឧបករណ៍ដែលត្រូវការ៖
រណារដៃ
ក្រដាសខាត់
ឈុតទួណឺវីស7
7
Troubleshooting
Troubleshooting
Footstool troubleshooting.
Flow
Loading...
8
8
History and honest limits
History and honest limits
**Harry W. Bolens** of Port Washington, Wisconsin, US 640,265, dated 2 January 1900, filed 4 October 1899. He claimed "a footstool-base consisting of legs provided at their upper ends with inwardly-extending flanges as well as horizontal lugs ... apertured for the engagement of top securing devices" and rails between the flanges. His legs and rails were castings, though he does not limit the material; the steel angle and flat bar, the bent lugs, the hardwood top and all sizes are ours.
សម្ភារៈ
5- 1 ដុំកន្លែងទុក
- 1 ដុំកន្លែងទុក
- កន្លែងទុក
- 1 ដុំកន្លែងទុក
- 1 ដុំកន្លែងទុក
ឧបករណ៍ចាំបាច់
10- កន្លែងទុក
- កន្លែងទុក
- កន្លែងទុក
- កន្លែងទុក
- កន្លែងទុក
- កន្លែងទុក
- កន្លែងទុក
- កន្លែងទុក
- កន្លែងទុក
- កន្លែងទុក
ប្លង់នេះធ្វើ
ប្លង់ពាក់ព័ន្ធ
ប្លង់ទាំងនេះចែករំលែកចំណេះដឹង — បច្ចេកទេស សម្ភារៈ ឬគោលការណ៍
CC0 សាធារណៈ
ប្លង់នេះត្រូវបានចេញផ្សាយក្រោម CC0។ អ្នកមានសិទ្ធិចម្លង កែប្រែ ចែកចាយ និងប្រើប្រាស់ដោយមិនចាំបាច់សុំអនុញ្ញាត។
គាំទ្រអ្នកបង្កើតដោយទិញផលិតផលតាមរយៈប្លង់របស់ពួកគេ ដែលពួកគេទទួលបាន កម្រៃជើងសារអ្នកបង្កើត កំណត់ដោយអ្នកលក់ ឬបង្កើតកំណែថ្មីនៃប្លង់នេះ ហើយបញ្ចូលជាការតភ្ជាប់ក្នុងប្លង់របស់អ្នកដើម្បីចែករំលែកចំណូល។


