កិច្ចសហប្រតិបត្តិការ
សិល្បៈ
សម្រស់ និង សុខុមាលភាព
សិប្បកម្ម
វប្បធម៌ និង ប្រវត្តិសាស្ត្រ
ការកម្សាន្ត
បរិស្ថាន
ម្ហូប និង ភេសជ្ជៈ
វិស្វកម្មបញ្ច្រាស
វិទ្យាសាស្ត្រ
កីឡា
បច្ចេកវិទ្យា
ប្រដាប់ដែលស្លៀក
Closet Shoe Rack: Wedge-Shaped Pockets on the Wall With a Slatted Bottom for Dirt to Fall Through (Boy Mechanic, 1913)
Woody

បង្កើតដោយ

Woody

13. វិច្ឆិកា 2026NO
6
0
0
0
0

Closet Shoe Rack: Wedge-Shaped Pockets on the Wall With a Slatted Bottom for Dirt to Fall Through (Boy Mechanic, 1913)

A shoe rack "that can be placed on the wall in the clothes closet", from The Boy Mechanic (1913): two boards 9 in wide and about 3 ft long, held apart by six wedge-shaped partitions so the pockets open wider at the top, and a slatted bottom that lets the dirt fall through. Sizes are the book's. Contributed to Popular Mechanics by Guy H. Harvey of Mill Valley, California.
ចាប់ផ្តើម
About 2 hours

ការណែនាំ

1

The partitions

កំពុងផ្ទុកសៀវភៅ Jupyter…
2

Read The Boy Mechanic

"Two boards, 9 in. wide and about 3 ft. long, with six partitions between, as shown, will make pockets about 6 in. long. The width of the pockets at the bottom is 2 in. and at the top 5 in."
3

Cut the boards and partitions

Cut two pine boards 9 in wide and about 3 ft long, the back and the front. Cut six partitions as wedges from the notebook, 9 in tall, 2 in deep at the bottom and 5 in at the top.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ក្តារឈើស្រល់ក្តារឈើស្រល់1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

ខ្សែវាស់ខ្សែវាស់
ខ្មៅដៃខ្មៅដៃ
ឆាកកាត់ជ្រុងកែងឆាកកាត់ជ្រុងកែង
រណារដៃរណារដៃ
4

Assemble the pockets

Nail the partitions to the back board, square to it, one at each end and the rest spaced about 6 in apart. Nail the front board to their sloping edges, so it leans out and the pockets open wider at the top.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ដែកគោលដែកគោល1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

ញញួរមានក្រញាំញញួរមានក្រញាំ
5

Fit the slatted bottom

Nail strips across the bottom of the pockets with gaps between them, as his Fig. 1, so the dirt from the shoes falls through.

សម្ភារៈសម្រាប់ជំហាននេះ៖

បន្ទះឈើរឹងតូចវែងបន្ទះឈើរឹងតូចវែង1 ដុំ
ដែកគោលដែកគោល1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

រណារដៃរណារដៃ
ញញួរមានក្រញាំញញួរមានក្រញាំ
6

Hang it

Screw the back board to the wall of the clothes closet (ours), and put a pair of shoes toe-down in each pocket.

សម្ភារៈសម្រាប់ជំហាននេះ៖

វីសឈើវីសឈើ1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

ស្វានដៃស្វានដៃ
ឈុតទួណឺវីសឈុតទួណឺវីស
7

Troubleshooting

Shoe rack troubleshooting.

Flow

Loading...
8

History and honest limits

From **The Boy Mechanic, Volume 1**, edited by H. H. Windsor, Popular Mechanics, Chicago, 1913 (Project Gutenberg #12655), "Homemade Shoe Rack", contributed by Guy H. Harvey of Mill Valley, California. The board sizes, pocket sizes and six partitions are the book's; the wood, nails, slat sizes and hanging screws are ours.

សម្ភារៈ

4

ឧបករណ៍ចាំបាច់

7
  • 1 vendor sell this, none ship to you yet
    កន្លែងទុក
  • 1 vendor sell this, none ship to you yet
    កន្លែងទុក
  • កន្លែងទុក
  • កន្លែងទុក
  • កន្លែងទុក
  • កន្លែងទុក
  • កន្លែងទុក

ប្លង់ពាក់ព័ន្ធ

ប្លង់ទាំងនេះចែករំលែកចំណេះដឹង — បច្ចេកទេស សម្ភារៈ ឬគោលការណ៍

CC0 សាធារណៈ

ប្លង់នេះត្រូវបានចេញផ្សាយក្រោម CC0។ អ្នកមានសិទ្ធិចម្លង កែប្រែ ចែកចាយ និងប្រើប្រាស់ដោយមិនចាំបាច់សុំអនុញ្ញាត។

គាំទ្រអ្នកបង្កើតដោយទិញផលិតផលតាមរយៈប្លង់របស់ពួកគេ ដែលពួកគេទទួលបាន កម្រៃជើងសារអ្នកបង្កើត កំណត់ដោយអ្នកលក់ ឬបង្កើតកំណែថ្មីនៃប្លង់នេះ ហើយបញ្ចូលជាការតភ្ជាប់ក្នុងប្លង់របស់អ្នកដើម្បីចែករំលែកចំណូល។

ការពិភាក្សា

(0)

ចូល ដើម្បីចូលរួមពិភាក្សា

កំពុងផ្ទុកមតិ...