កិច្ចសហប្រតិបត្តិការ
សិល្បៈ
សម្រស់ និង សុខុមាលភាព
សិប្បកម្ម
វប្បធម៌ និង ប្រវត្តិសាស្ត្រ
ការកម្សាន្ត
បរិស្ថាន
ម្ហូប និង ភេសជ្ជៈ
វិស្វកម្មបញ្ច្រាស
វិទ្យាសាស្ត្រ
កីឡា
បច្ចេកវិទ្យា
ប្រដាប់ដែលស្លៀក
Coasting Toboggan: Four Steamed Hardwood Boards Bent Over a Log Form (Boy Mechanic, 1919)
Woody

បង្កើតដោយ

Woody

13. វិច្ឆិកា 2026NO
12
0
0
0
0

Coasting Toboggan: Four Steamed Hardwood Boards Bent Over a Log Form (Boy Mechanic, 1919)

A. M. Parker's toboggan from The Boy Mechanic, Book 3 (1919), 7-1/2 ft long and 16 in wide: four 5/16 in hardwood boards steamed at one end and bent round a 12 in log on a simple form, held by notched cross cleats, the curl riveted and wired, and a rope run along the sides.
មធ្យម
About 1 week (four days drying)

ការណែនាំ

1

His mill bill in centimetres

កំពុងផ្ទុកសៀវភៅ Jupyter…
2

Read The Boy Mechanic, Book 3

"Essentials of a good toboggan, whether for coasting or use in transportation, are strength and lightness." Woods in order of merit: hickory, birch and oak (not quarter-sawed).
3

Prepare the boards and cleats

Choose four 5/16 by 4 in by 10 ft boards straight in grain and free from knots. Plane the running side and bevel the edges so that, together, they form a wide V joint half the depth of the boards. Notch the seven 1 by 1 in cross cleats on one side, 1 in from each end, for the side ropes.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ក្តារឈើរឹងក្តារឈើរឹង4 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

កាំបិតឈូសឈើដៃកាំបិតឈូសឈើដៃ
រណារដៃរណារដៃ
ដែកឆូតឈើដែកឆូតឈើ
ខ្មៅដៃខ្មៅដៃ
ខ្សែវាស់ខ្សែវាស់
4

Build the bending form

Bore a gimlet hole through the centre of each 1 by 2 by 18 in piece and two more 4-1/4 in each side of it. Nail one 6 ft common board to each end of the 12 in by 18 in log block so their ends run parallel. With 3 in nails fix one bored cleat to the block between them, held out 1/2 in by a temporary spacer.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ក្តារឈើស្រល់ក្តារឈើស្រល់2 ដុំ
ដែកគោលដែកគោល1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

រណារដៃរណារដៃ
ស្វានដៃស្វានដៃ
ញញួរញញួរ
5

Steam and bend

Steam about 3 ft of the board ends, or boil them in a tank. Clamp or nail the dry ends together edge to edge between two of the 1 by 2 in pieces, about 1/4 in apart. Push the steamed ends under the cleat on the block (its nails slip between the boards), bear down and nail on another bored cleat as far as the floor allows. Turn it over and bend the boards round the block, nailing on more cleats, until the clamped end lies between the 6 ft boards; hold it with a piece nailed across. The closer the cleats, the less risk of splitting.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ដែកគោលដែកគោល1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

ឆ្នាំងធំឆ្នាំងធំ
ញញួរញញួរ
ឈ្នាប់ដងវែងឈ្នាប់ដងវែង
6

Fit the cleats and finish

Dry at least four days on the form. Clamp the two 1/2 by 1 in pieces on each side of the bow ends, drill through and rivet them. Rivet a 1 by 1 in crossbar inside the bow at the extreme front and another under the end of the curl, and wire them together to hold the bend. Put the tail crossbar not nearer than 2-1/2 in from the board ends and space the rest evenly, notched side down. Trim, scrape and sandpaper the bottom, finish with oil, and run a 3/8 in rope through the notches under the cleat ends.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ក្តារឈើរឹងក្តារឈើរឹង1 ដុំ
ដែកគោលដែកថែបដែកគោលដែកថែប1 ដុំ
លួសដែកទាញលួសដែកទាញ1 ដុំ
ប្រេងលីនស៊ីតប្រេងលីនស៊ីត1 ដុំ
ក្រដាសខាត់ក្រដាសខាត់1 ដុំ
ខ្សែពួរកប្បាសខ្សែពួរកប្បាស1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

ស្វានដៃស្វានដៃ
ញញួរញញួរ
រណារដៃរណារដៃ
ដែកកោសដែកកោស
ដង្កាប់មាត់រាបដង្កាប់មាត់រាប
7

Troubleshooting

Toboggan troubleshooting.

Flow

Loading...
8

History and honest limits

From "Making a Coasting Toboggan" by A. M. Parker, in **The Boy Mechanic, Book 3**, Popular Mechanics, 1919 (Project Gutenberg 71856; checked on the archive.org scan boymechanic0003unse, pp. 11-13). The tools and metric figures are ours.

សម្ភារៈ

8

ឧបករណ៍ចាំបាច់

11
  • កន្លែងទុក
  • កន្លែងទុក
  • កន្លែងទុក
  • 1 vendor sell this, none ship to you yet
    កន្លែងទុក
  • 1 vendor sell this, none ship to you yet
    កន្លែងទុក
  • កន្លែងទុក
  • កន្លែងទុក
  • កន្លែងទុក
  • កន្លែងទុក
  • កន្លែងទុក
  • កន្លែងទុក

ប្លង់ពាក់ព័ន្ធ

ប្លង់ទាំងនេះចែករំលែកចំណេះដឹង — បច្ចេកទេស សម្ភារៈ ឬគោលការណ៍

CC0 សាធារណៈ

ប្លង់នេះត្រូវបានចេញផ្សាយក្រោម CC0។ អ្នកមានសិទ្ធិចម្លង កែប្រែ ចែកចាយ និងប្រើប្រាស់ដោយមិនចាំបាច់សុំអនុញ្ញាត។

គាំទ្រអ្នកបង្កើតដោយទិញផលិតផលតាមរយៈប្លង់របស់ពួកគេ ដែលពួកគេទទួលបាន កម្រៃជើងសារអ្នកបង្កើត កំណត់ដោយអ្នកលក់ ឬបង្កើតកំណែថ្មីនៃប្លង់នេះ ហើយបញ្ចូលជាការតភ្ជាប់ក្នុងប្លង់របស់អ្នកដើម្បីចែករំលែកចំណូល។

ការពិភាក្សា

(0)

ចូល ដើម្បីចូលរួមពិភាក្សា

កំពុងផ្ទុកមតិ...