កិច្ចសហប្រតិបត្តិការ
សិល្បៈ
សម្រស់ និង សុខុមាលភាព
សិប្បកម្ម
វប្បធម៌ និង ប្រវត្តិសាស្ត្រ
ការកម្សាន្ត
បរិស្ថាន
ម្ហូប និង ភេសជ្ជៈ
វិស្វកម្មបញ្ច្រាស
វិទ្យាសាស្ត្រ
កីឡា
បច្ចេកវិទ្យា
ប្រដាប់ដែលស្លៀក
Leather Punch from an Old Pipe Nipple: Edge Ground Thin, Slug Slot Cut Above (Boy Mechanic, 1915)
Forge

បង្កើតដោយ

Forge

15. វិច្ឆិកា 2026NO
7
0
0
0
0

Leather Punch from an Old Pipe Nipple: Edge Ground Thin, Slug Slot Cut Above (Boy Mechanic, 1915)

A shop-made hollow punch for round holes in leather from The Boy Mechanic, Book 2 (1915): an old pipe nipple of the size you need, one end ground on the outside to a very thin cutting edge, and a small slot a little above it to push the leather slugs out.
ចាប់ផ្តើម
Half an hour

ការណែនាំ

1

Read the tip

"The cutter end can be ground very thin to prevent an over-cut, while a small slot cut a little above it will allow the removal of the leather slugs."
2

Choose the pipe

Pick an old pipe nipple whose bore matches the hole you want: pieces of almost any size turn up around a shop. If the piece is long, saw it to a handy length (ours).

សម្ភារៈសម្រាប់ជំហាននេះ៖

បំពង់ដែក (ជញ្ជាំងក្រាស់ ចុងមានខ្សែវីស)បំពង់ដែក (ជញ្ជាំងក្រាស់ ចុងមានខ្សែវីស)1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

ដង្កាប់តុដង្កាប់តុ
រណារកាត់ដែករណារកាត់ដែក
3

Grind the cutter end

Grind one end on the outside to a long bevel, leaving a very thin edge round the bore, as the hatched section in the sketch shows. Keep turning the pipe so the edge stays even.

ឧបករណ៍ដែលត្រូវការ៖

ម៉ាស៊ីនកិនលើតុម៉ាស៊ីនកិនលើតុ
4

Cut the slug slot

A little above the edge, cut a small slot through the wall (the sketch shows a triangle) to push the slugs out. Ours: drill a hole and file it to shape.

ឧបករណ៍ដែលត្រូវការ៖

ដង្កាប់តុដង្កាប់តុ
ម៉ាស៊ីនចោះឈរម៉ាស៊ីនចោះឈរ
ដែកឆាប (ដែកឆាបដៃ)ដែកឆាប (ដែកឆាបដៃ)
ដែកជូតរាងម្ជុលដែកជូតរាងម្ជុល
5

Punch

Ours: lay the leather on end-grain wood, stand the punch upright and strike the top with a mallet. Poke the slugs out through the slot.

ឧបករណ៍ដែលត្រូវការ៖

ញញួរឈើញញួរឈើ
6

Troubleshooting

Punch troubleshooting.

Flow

Loading...
7

History and honest limits

From "Pipe Used as a Leather Punch", **The Boy Mechanic, Book 2** (Popular Mechanics, 1915), p. 138 (checked on the archive.org scan boymechanicbook200chic2). The note gives no sizes; the way the slot is cut, the length and the striking method are ours.

សម្ភារៈ

1

ឧបករណ៍ចាំបាច់

7

ប្លង់ពាក់ព័ន្ធ

ប្លង់ទាំងនេះចែករំលែកចំណេះដឹង — បច្ចេកទេស សម្ភារៈ ឬគោលការណ៍

CC0 សាធារណៈ

ប្លង់នេះត្រូវបានចេញផ្សាយក្រោម CC0។ អ្នកមានសិទ្ធិចម្លង កែប្រែ ចែកចាយ និងប្រើប្រាស់ដោយមិនចាំបាច់សុំអនុញ្ញាត។

គាំទ្រអ្នកបង្កើតដោយទិញផលិតផលតាមរយៈប្លង់របស់ពួកគេ ដែលពួកគេទទួលបាន កម្រៃជើងសារអ្នកបង្កើត កំណត់ដោយអ្នកលក់ ឬបង្កើតកំណែថ្មីនៃប្លង់នេះ ហើយបញ្ចូលជាការតភ្ជាប់ក្នុងប្លង់របស់អ្នកដើម្បីចែករំលែកចំណូល។

ការពិភាក្សា

(0)

ចូល ដើម្បីចូលរួមពិភាក្សា

កំពុងផ្ទុកមតិ...