កិច្ចសហប្រតិបត្តិការ
សិល្បៈ
សម្រស់ និង សុខុមាលភាព
សិប្បកម្ម
វប្បធម៌ និង ប្រវត្តិសាស្ត្រ
ការកម្សាន្ត
បរិស្ថាន
ម្ហូប និង ភេសជ្ជៈ
វិស្វកម្មបញ្ច្រាស
វិទ្យាសាស្ត្រ
កីឡា
បច្ចេកវិទ្យា
ប្រដាប់ដែលស្លៀក
ប្លង់បច្ចេកវិទ្យា

បច្ចេកវិទ្យា

1,320 ប្លង់មាន • 8 ប្រភេទរង

ប្លង់ (1,320)

Kitchen Funnel with Air-Vent Ribs, 3D Printed in PETG

Kitchen Funnel with Air-Vent Ribs, 3D Printed in PETG

ដោយ 3DBonanzaUS

ឧបករណ៍

1
0
0
0
0
0
Fermenter Lid with Airlock Seat, 3D Printed in PETG

Fermenter Lid with Airlock Seat, 3D Printed in PETG

ដោយ 3DBonanzaUS

ស្រាបៀរ

3
0
0
0
0
0
Three-Piece Airlock, 3D Printed in PETG

Three-Piece Airlock, 3D Printed in PETG

ដោយ 3DBonanzaUS

ស្រាបៀរ

1
0
0
0
1
0
Self-Watering Plant Station with ESP32 and OLED

Self-Watering Plant Station with ESP32 and OLED

ដោយ EdFI

អេឡិចត្រូនិក

5
0
0
0
0
0
ESP32 Self-Watering Pot Controller

ESP32 Self-Watering Pot Controller

ដោយ EdFI

Industry 4.0 — Computers & Digital Automation (1960)

3
0
0
0
0
0
Steeled Picks: Common Pick, Pickaxe and Miner's Pick, Iron Eye with Steel Points Welded In (Edwinson, 1886)

Steeled Picks: Common Pick, Pickaxe and Miner's Pick, Iron Eye with Steel Points Welded In (Edwinson, 1886)

ដោយ ForgeNO

ការធ្វើការលោហៈ

7
0
0
0
0
0
Pyrolusite Manganese Ore: Mined from Clay, Washed, Screened, Hand-Sorted, Dried and Ground (Harder, USGS 1910)

Pyrolusite Manganese Ore: Mined from Clay, Washed, Screened, Hand-Sorted, Dried and Ground (Harder, USGS 1910)

ដោយ CharlieDE

ការជីកយករ៉ែ

3
0
0
0
0
0
Rotary Lawn Sprinkler: a Barker's-Mill Head Turning on Balls Round the Supply Pipe (Gibbs, 1901)

Rotary Lawn Sprinkler: a Barker's-Mill Head Turning on Balls Round the Supply Pipe (Gibbs, 1901)

ដោយ ForgeNO

ក្តៅ

10
0
0
0
0
0
The Centre-Fire Cartridge With an Anvil (Boxer, 1866-1869) - History and How It Works

The Centre-Fire Cartridge With an Anvil (Boxer, 1866-1869) - History and How It Works

ដោយ CharlieDE

អាវុធ

3
0
0
0
0
0
The Lever-Action Magazine Rifle (B. Tyler Henry, 1860) - History and How It Works

The Lever-Action Magazine Rifle (B. Tyler Henry, 1860) - History and How It Works

ដោយ CharlieDE

អាវុធ

1
0
0
0
0
0
The Bored-Through Cylinder and the Self-Contained Cartridge (Rollin White, 1855) - History and How It Works

The Bored-Through Cylinder and the Self-Contained Cartridge (Rollin White, 1855) - History and How It Works

ដោយ CharlieDE

អាវុធ

3
0
0
0
0
0
The Revolver: Several Chambers Turning Behind One Barrel (Colt, 1836 and 1839) - History and How It Works

The Revolver: Several Chambers Turning Behind One Barrel (Colt, 1836 and 1839) - History and How It Works

ដោយ CharlieDE

អាវុធ

2
0
0
0
0
0
Cam-Arm Tubing Cutter: Two Swinging Arms Keep the Wheel and Rollers Evenly Round Any Tube (Lutsker, 1959)

Cam-Arm Tubing Cutter: Two Swinging Arms Keep the Wheel and Rollers Evenly Round Any Tube (Lutsker, 1959)

ដោយ ForgeNO

ការធ្វើការលោហៈ

9
0
0
0
0
0
Sprung-Leg Tubing Cutter: a Bent Rod With a Disk Outside and a Roller Inside, the Handle's Screw Bends One Leg In (Zeiler, 1958)

Sprung-Leg Tubing Cutter: a Bent Rod With a Disk Outside and a Roller Inside, the Handle's Screw Bends One Leg In (Zeiler, 1958)

ដោយ ForgeNO

ការធ្វើការលោហៈ

8
0
0
0
0
0
Slip-Knob Tube Cutter: the Feed Knob Turns the Screw Through Spring-Loaded Plates and Slips Before the Tube Is Crushed (Parker, 1944)

Slip-Knob Tube Cutter: the Feed Knob Turns the Screw Through Spring-Loaded Plates and Slips Before the Tube Is Crushed (Parker, 1944)

ដោយ ForgeNO

ការធ្វើការលោហៈ

8
0
0
0
0
0
Swing-Nut Tubing Cutter: Swing the Blade Support Down and the Jaw Slides to the Tube, Up and the Screw Feeds It (Pritchard, 1941)

Swing-Nut Tubing Cutter: Swing the Blade Support Down and the Jaw Slides to the Tube, Up and the Screw Feeds It (Pritchard, 1941)

ដោយ ForgeNO

ការធ្វើការលោហៈ

14
0
0
0
0
0
V-Slide Tubing Cutter: Two Slide Halves Held on the Ways by One Spring Clip, a Reamer on the Frame (Thewes, 1938)

V-Slide Tubing Cutter: Two Slide Halves Held on the Ways by One Spring Clip, a Reamer on the Frame (Thewes, 1938)

ដោយ ForgeNO

ការធ្វើការលោហៈ

13
0
0
0
0
0
Reversible-Tip Soft-Face Hammer: Domed Rubber Tips Locked in Screw-On Sockets by an Internal Rib (West & Robinson, 1962)

Reversible-Tip Soft-Face Hammer: Domed Rubber Tips Locked in Screw-On Sockets by an Internal Rib (West & Robinson, 1962)

ដោយ ForgeNO

ការធ្វើការលោហៈ

13
0
0
0
0
0
Threaded-Stud Rubber-Head Hammer: Heads Screw Onto the Body's Own Studs and Lock the Handle's Nail In (Dicks, 1951)

Threaded-Stud Rubber-Head Hammer: Heads Screw Onto the Body's Own Studs and Lock the Handle's Nail In (Dicks, 1951)

ដោយ ForgeNO

ការធ្វើការលោហៈ

9
0
0
0
0
0
Screw-On Rubber Head Mallet: Rubber Members on Flanged Ferrules, Cupped and Cushioned on Steel Studs (Pemmerl, 1950)

Screw-On Rubber Head Mallet: Rubber Members on Flanged Ferrules, Cupped and Cushioned on Steel Studs (Pemmerl, 1950)

ដោយ ForgeNO

ការធ្វើការលោហៈ

5
0
0
0
0
0
Renewable Rubber-Face Hammer: Rolled Faces Pressed Onto Pronged Discs, Driven Out Through a Notch When Worn (Sewell, 1928)

Renewable Rubber-Face Hammer: Rolled Faces Pressed Onto Pronged Discs, Driven Out Through a Notch When Worn (Sewell, 1928)

ដោយ ForgeNO

ការធ្វើការលោហៈ

11
0
0
0
0
0
Laminated Rubber Mallet: A Rubber-and-Canvas Head Locked on a Flared Handle by an Internal Rib (Whisler, 1924)

Laminated Rubber Mallet: A Rubber-and-Canvas Head Locked on a Flared Handle by an Internal Rib (Whisler, 1924)

ដោយ ForgeNO

ការធ្វើការឈើ

10
0
0
0
0
0
Laminate Bevel Trimmer: Two Pads at Right Angles Hold a Small Router at 45 Degrees on a Corner (Roche, 1971)

Laminate Bevel Trimmer: Two Pads at Right Angles Hold a Small Router at 45 Degrees on a Corner (Roche, 1971)

ដោយ ForgeNO

ការធ្វើការឈើ

6
0
0
0
0
0
Rack-and-Pinion Router With a Zero-Set Knob: Two Knobs on One Hollow Pinion, Set to Zero on the Work (Rees, 1969)

Rack-and-Pinion Router With a Zero-Set Knob: Two Knobs on One Hollow Pinion, Set to Zero on the Work (Rees, 1969)

ដោយ ForgeNO

ការធ្វើការឈើ

7
0
0
0
0
0
បង្ហាញ 24 ក្នុងចំណោម 1320