សិល្បៈ
សម្រស់ និង សុខុមាលភាព
សិប្បកម្ម
វប្បធម៌ និង ប្រវត្តិសាស្ត្រ
ការកម្សាន្ត
បរិស្ថាន
ម្ហូប និង ភេសជ្ជៈ
វិស្វកម្មបញ្ច្រាស
វិទ្យាសាស្ត្រ
កីឡា
បច្ចេកវិទ្យា
ប្រដាប់ដែលស្លៀក
Spring Scale Calibrated with Known Weights
Penny

បង្កើតដោយ

Penny

11. តុលា 2026DK
40
0
0
0
0

Spring Scale Calibrated with Known Weights

A spring scale, or newton meter, is a spring fixed at one end with a hook at the other. By Hooke's law the stretch grows in step with the force, so the marks on its scale are evenly spaced. This one is built in a clear tube with a paper scale and calibrated with known weights: on Earth a 100 g mass pulls with about 0.98 N (100 g × 9.81 m/s²). The sizes here are ours: a tube about 20 cm long and a light extension spring that stretches clearly under 1 kg. Do not load it past the heaviest calibration weight: an overstretched spring stays longer and the scale is lost.
ចាប់ផ្តើម
2 hours

ការណែនាំ

1

Make the hooks

Bend two pieces of steel wire with round-nose pliers: one with a loop at each end to hang the spring from the top plug, one long rod with a loop at the top and a hook at the bottom.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ខ្សែលួសដែកខ្សែលួសដែក0.4 m

ឧបករណ៍ដែលត្រូវការ៖

តង់មាត់មូលតង់មាត់មូល
2

Plug the tube

Push the top wire through one cork disc and glue the disc into the top of the tube. Make a hole in the second disc for the rod to slide through and glue it into the bottom.

សម្ភារៈសម្រាប់ជំហាននេះ៖

បំពង់អាគ្រីលិក (ថ្លា)បំពង់អាគ្រីលិក (ថ្លា)1 ដុំ
បន្ទះមូលសំបកឈើកកតូចបន្ទះមូលសំបកឈើកកតូច2 ដុំ
កាវកាវ1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

កាំបិតសិប្បកម្មកាំបិតសិប្បកម្ម
3

Hang the spring

Hook the spring to the top loop and the rod's top loop to the spring, so the rod hangs out through the bottom plug. The lower end of the spring is the pointer.

សម្ភារៈសម្រាប់ជំហាននេះ៖

រ៉ឺស័រទាញរ៉ឺស័រទាញ1 ដុំ
4

Fit the scale

Glue a strip of graph paper along the outside of the tube and mark zero at the spring's lower end with nothing hanging.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ក្រដាសក្រឡាក្រដាសក្រឡា1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

ប៊ិចសម្គាល់អចិន្ត្រៃយ៍ប៊ិចសម្គាល់អចិន្ត្រៃយ៍
5

Calibrate

Hang 100 g, 200 g and so on up to 1 kg, marking the pointer each time; each 100 g is about 0.98 N. The marks should be evenly spaced; check that the pointer returns to zero when unloaded.

ឧបករណ៍ដែលត្រូវការ៖

ឈុតដុំថ្លឹងសម្រាប់តម្រូវឈុតដុំថ្លឹងសម្រាប់តម្រូវ

សម្ភារៈ

6

ឧបករណ៍ចាំបាច់

4

ប្លង់ពាក់ព័ន្ធ

ប្លង់ទាំងនេះចែករំលែកចំណេះដឹង — បច្ចេកទេស សម្ភារៈ ឬគោលការណ៍

CC0 សាធារណៈ

ប្លង់នេះត្រូវបានចេញផ្សាយក្រោម CC0។ អ្នកមានសិទ្ធិចម្លង កែប្រែ ចែកចាយ និងប្រើប្រាស់ដោយមិនចាំបាច់សុំអនុញ្ញាត។

គាំទ្រអ្នកបង្កើតដោយទិញផលិតផលតាមរយៈប្លង់របស់ពួកគេ ដែលពួកគេទទួលបាន កម្រៃជើងសារអ្នកបង្កើត កំណត់ដោយអ្នកលក់ ឬបង្កើតកំណែថ្មីនៃប្លង់នេះ ហើយបញ្ចូលជាការតភ្ជាប់ក្នុងប្លង់របស់អ្នកដើម្បីចែករំលែកចំណូល។

ការពិភាក្សា

(0)

ចូល ដើម្បីចូលរួមពិភាក្សា

កំពុងផ្ទុកមតិ...