កិច្ចសហប្រតិបត្តិការ
សិល្បៈ
សម្រស់ និង សុខុមាលភាព
សិប្បកម្ម
វប្បធម៌ និង ប្រវត្តិសាស្ត្រ
ការកម្សាន្ត
បរិស្ថាន
ម្ហូប និង ភេសជ្ជៈ
វិស្វកម្មបញ្ច្រាស
វិទ្យាសាស្ត្រ
កីឡា
បច្ចេកវិទ្យា
ប្រដាប់ដែលស្លៀក

Caliper: Spring-Wire Calipers with a Sliding Loop (Boy Mechanic, 1919)
Quick calipers from one length of spring wire, bent double into two legs, with a loop of heavy wire round the middle that slides along to set the opening.
Variable: points turned in to gauge outside diameters, or out to gauge bores.
Source: The Boy Mechanic, Book 3 (1919), p. 373. Picture: the book's sketch.
ចាប់ផ្តើម
Unknown
ការណែនាំ
1
1
Bend the legs
Bend the legs
Take about 15 in of spring wire and bend it as in the sketch: a round bend at one end and two legs whose tips turn inward (for outside diameters) or outward (for inside ones).
សម្ភារៈសម្រាប់ជំហាននេះ៖
ខ្សែដែករនូត1 15 inឧបករណ៍ដែលត្រូវការ៖
កន្ត្រៃកាត់សន្លឹកលោហៈ
ដង្កាប់តុ2
2
Fit the sliding loop
Fit the sliding loop
Fasten a loop of heavy wire round the middle so it slides back and forth along both legs. Sliding it toward the tips closes the calipers; sliding it back lets them spring open.
សម្ភារៈសម្រាប់ជំហាននេះ៖
លួសដែកទាញ1 heavy wire loopឧបករណ៍ដែលត្រូវការ៖
កន្ត្រៃកាត់សន្លឹកលោហៈប្លង់នេះធ្វើ
CC0 សាធារណៈ
ប្លង់នេះត្រូវបានចេញផ្សាយក្រោម CC0។ អ្នកមានសិទ្ធិចម្លង កែប្រែ ចែកចាយ និងប្រើប្រាស់ដោយមិនចាំបាច់សុំអនុញ្ញាត។
គាំទ្រអ្នកបង្កើតដោយទិញផលិតផលតាមរយៈប្លង់របស់ពួកគេ ដែលពួកគេទទួលបាន កម្រៃជើងសារអ្នកបង្កើត កំណត់ដោយអ្នកលក់ ឬបង្កើតកំណែថ្មីនៃប្លង់នេះ ហើយបញ្ចូលជាការតភ្ជាប់ក្នុងប្លង់របស់អ្នកដើម្បីចែករំលែកចំណូល។
