កិច្ចសហប្រតិបត្តិការ
សិល្បៈ
សម្រស់ និង សុខុមាលភាព
សិប្បកម្ម
វប្បធម៌ និង ប្រវត្តិសាស្ត្រ
ការកម្សាន្ត
បរិស្ថាន
ម្ហូប និង ភេសជ្ជៈ
វិស្វកម្មបញ្ច្រាស
វិទ្យាសាស្ត្រ
កីឡា
បច្ចេកវិទ្យា
ប្រដាប់ដែលស្លៀក

Clay Tool Set: Potter's Turning Tools, Turning Stick and Rib (Binns, The Potter's Craft, 1910)
The potter's set for turning (trimming) leather-hard pots on the wheel, as Binns taught it: soft steel tools the potter bends and files to shape, a turning stick and upright board to steady the hand, and wooden ribs cut to the shape of the inside of a pot.
Result: a set of turning tools, a turning stick and board, and ribs.
Source: C. F. Binns, The Potter's Craft (1910), pp. 86-88 and 179. Unknown: the tool sizes. Picture: Fig. 19 of the book.
ចាប់ផ្តើម
Unknown
ការណែនាំ
1
1
Bend and file the turning tools
Bend and file the turning tools
Make the turning tools of soft steel strip: bend each near its end and file the edge to suit. Make broad tools filed to a curve, for finishing concave surfaces; one or two narrow tools with a curved edge, which cut faster; and a small square tool. Keep the filing at its own bench so steel dust does not get into the clay. Ours: mild steel flat bar. Not given: the strip sizes.
សម្ភារៈសម្រាប់ជំហាននេះ៖
ដែកបន្ទះរាបថែបទន់1 turning toolsឧបករណ៍ដែលត្រូវការ៖
រណារកាត់ដែក
ញញួរ
ទាំងជល់ (កំណាត់ដែក)
ដែកឆាបលោហៈ2
2
Make the board and turning stick
Make the board and turning stick
Cut a soft pine board 8 or 10 inches wide and 2 feet high, to stand upright at the back of the wheel frame opposite the potter, screwed on or set in a socket so it can be removed. Make the turning stick from a broomstick with a sharpened nail in its end; its point presses into the board at any height and the hand holding the tool rests on it, like a painter's mahl-stick. Ours: a wooden dowel for the broomstick.
សម្ភារៈសម្រាប់ជំហាននេះ៖
ក្តារឈើស្រល់1 board support
ស្នៀតឈើ1 turning stick
ដែកគោល1 stick pointឧបករណ៍ដែលត្រូវការ៖
រណារកាត់ដែក
ដែកឆាបលោហៈ
ញញួរ3
3
Cut the ribs
Cut the ribs
Cut a piece of wood, called a rib, to the exact shape of the inside of the pot to be made; it smooths the inside while the wheel turns. Make one for each shape. Ours: hardwood.
សម្ភារៈសម្រាប់ជំហាននេះ៖
ក្ដារឈើរឹងក្រាស់1 ribsឧបករណ៍ដែលត្រូវការ៖
រណារកាត់ដែក
ដែកឆាបលោហៈសម្ភារៈ
5- 1 turning toolsកន្លែងទុក
- 1 board supportកន្លែងទុក
- 1 turning stickកន្លែងទុក
- 1 stick pointកន្លែងទុក
- 1 ribsកន្លែងទុក
សម្ភារៈប្លង់ដែលបានភ្ជាប់

ចំណែក 10%
Mild Steel Bar Stock Forged from an Ingot
ដោយ Forge
សម័យទំនើប
46
0
0
0
5
0

ចំណែក 10%
Pine Boards with a Chainsaw Mill
ដោយ Woody
ការធ្វើការឈើ
47
0
0
0
1
0

ចំណែក 10%
Riven Hardwood Dowels with a Dowel Plate
ដោយ Woody
ការធ្វើការឈើ
59
0
0
0
1
0

ចំណែក 10%
Forging Iron Nails by Hand — Drawing, Cutting, and Heading
ដោយ Forge
ដែក
63
0
0
0
3
0
ប្លង់នេះធ្វើ
CC0 សាធារណៈ
ប្លង់នេះត្រូវបានចេញផ្សាយក្រោម CC0។ អ្នកមានសិទ្ធិចម្លង កែប្រែ ចែកចាយ និងប្រើប្រាស់ដោយមិនចាំបាច់សុំអនុញ្ញាត។
គាំទ្រអ្នកបង្កើតដោយទិញផលិតផលតាមរយៈប្លង់របស់ពួកគេ ដែលពួកគេទទួលបាន កម្រៃជើងសារអ្នកបង្កើត កំណត់ដោយអ្នកលក់ ឬបង្កើតកំណែថ្មីនៃប្លង់នេះ ហើយបញ្ចូលជាការតភ្ជាប់ក្នុងប្លង់របស់អ្នកដើម្បីចែករំលែកចំណូល។
