កិច្ចសហប្រតិបត្តិការ
សិល្បៈ
សម្រស់ និង សុខុមាលភាព
សិប្បកម្ម
វប្បធម៌ និង ប្រវត្តិសាស្ត្រ
ការកម្សាន្ត
បរិស្ថាន
ម្ហូប និង ភេសជ្ជៈ
វិស្វកម្មបញ្ច្រាស
វិទ្យាសាស្ត្រ
កីឡា
បច្ចេកវិទ្យា
ប្រដាប់ដែលស្លៀក
Coopered Vat: Oak Staves in Riveted Iron Hoops
English
Woody

បង្កើតដោយ

Woody

14. តុលា 2026NO
29
0
0
0
0

Coopered Vat: Oak Staves in Riveted Iron Hoops

A vat is the cooper's large open tub: oak staves standing edge to edge, held tight by hoops, with a flat bottom set in a groove. Coopers made the vats beer was brewed in; papermakers and chemists use them to hold pulp, washes and settling liquors. Shave tapered staves, forge and rivet iron hoops, raise the staves in the hoops and fit the bottom. The picture: our diagram, a vat and its tapered staves.
កម្រិតខ្ពស់
Several days

ការណែនាំ

1

Shape the staves

Rive or saw oak into staves as long as the vat is deep. Shave each one on the horse, taper it from top to bottom (step 5 gives the widths), and plane the edges so neighbours meet along their whole length.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ក្ដារឈើរឹងក្រាស់ក្ដារឈើរឹងក្រាស់6 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

ហ្វ្រូ (កាំបិតពុះ)ហ្វ្រូ (កាំបិតពុះ)
តាំងឆូតឈើតាំងឆូតឈើ
កាំបិតទាញពីរដងកាំបិតទាញពីរដង
កាំបិតឈូសឈើដៃកាំបិតឈូសឈើដៃ
រណារដៃរណារដៃ
2

Forge the hoops

Draw wrought iron into flat strip about 30 × 3 mm (our size), cut it to the circumference where each hoop sits plus a lap, bend it round, punch the lap and rivet it closed.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ដំបងដែកវាយដំបងដែកវាយ3 ដុំ
ដែកគោលដែកដែកគោលដែក6 ដុំ
ធ្យូងធ្យូង5 as required

ឧបករណ៍ដែលត្រូវការ៖

ឡជាងដែកឡជាងដែក
ទាំងជល់ (កំណាត់ដែក)ទាំងជល់ (កំណាត់ដែក)
ញញួរស្នាមឆ្លងញញួរស្នាមឆ្លង
ដែកចោះក្ដៅដែកចោះក្ដៅ
ដង្កៀបជាងដែកដង្កៀបជាងដែក
ស្រោមដៃផ្សារស្រោមដៃផ្សារ
3

Raise the vat

Stand the staves inside a hoop, wide ends up, until the ring is closed. Drive the hoops down with a hammer and a block until the joints close tight.

ឧបករណ៍ដែលត្រូវការ៖

ញញួរស្នាមឆ្លងញញួរស្នាមឆ្លង
4

Groove and bottom

Cut a groove round the inside a little above the lower edge. Join planks into a board, scribe a circle to fit the groove, cut and bevel it, slack the lower hoop, spring the bottom in, and drive the hoop home. Fill with water: the wood swells and seals.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ក្ដារឈើរឹងក្រាស់ក្ដារឈើរឹងក្រាស់2 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

ឈុតដែកឆូតឈុតដែកឆូត
កុងប៉ាសពីរជើងកុងប៉ាសពីរជើង
រណារដៃរណារដៃ
កាំបិតឈូសឈើដៃកាំបិតឈូសឈើដៃ
ញញួរស្នាមឆ្លងញញួរស្នាមឆ្លង
5

Staves and hoops

កំពុងផ្ទុកសៀវភៅ Jupyter…

សម្ភារៈ

4

ឧបករណ៍ចាំបាច់

13

ប្លង់ពាក់ព័ន្ធ

ប្លង់ទាំងនេះចែករំលែកចំណេះដឹង — បច្ចេកទេស សម្ភារៈ ឬគោលការណ៍

CC0 សាធារណៈ

ប្លង់នេះត្រូវបានចេញផ្សាយក្រោម CC0។ អ្នកមានសិទ្ធិចម្លង កែប្រែ ចែកចាយ និងប្រើប្រាស់ដោយមិនចាំបាច់សុំអនុញ្ញាត។

គាំទ្រអ្នកបង្កើតដោយទិញផលិតផលតាមរយៈប្លង់របស់ពួកគេ ដែលពួកគេទទួលបាន កម្រៃជើងសារអ្នកបង្កើត កំណត់ដោយអ្នកលក់ ឬបង្កើតកំណែថ្មីនៃប្លង់នេះ ហើយបញ្ចូលជាការតភ្ជាប់ក្នុងប្លង់របស់អ្នកដើម្បីចែករំលែកចំណូល។

ការពិភាក្សា

(0)

ចូល ដើម្បីចូលរួមពិភាក្សា

កំពុងផ្ទុកមតិ...