កិច្ចសហប្រតិបត្តិការ
សិល្បៈ
សម្រស់ និង សុខុមាលភាព
សិប្បកម្ម
វប្បធម៌ និង ប្រវត្តិសាស្ត្រ
ការកម្សាន្ត
បរិស្ថាន
ម្ហូប និង ភេសជ្ជៈ
វិស្វកម្មបញ្ច្រាស
វិទ្យាសាស្ត្រ
កីឡា
បច្ចេកវិទ្យា
ប្រដាប់ដែលស្លៀក

Crutch: a Split Broom-Handle Crutch (Boy Mechanic, 1913)
A crutch made to the user's own length from a broom handle: split, soaked and spread into a Y, with a riveted hand grip and a shaped top piece nailed across for the armpit.
Make two for a pair.
Source: The Boy Mechanic, Book 1 (1913), p. 369. Picture: Figs. 1-3 of the book.
ចាប់ផ្តើម
Unknown
ការណែនាំ
1
1
Split and soak the handle
Split and soak the handle
Split a broom handle with a rip saw to within 1 ft of one end (Fig. 1). Soak it in water for three days so the halves will bend.
សម្ភារៈសម្រាប់ជំហាននេះ៖
ស្នៀតឈើ1 broom handleឧបករណ៍ដែលត្រូវការ៖
រណារអារបណ្ដោយ
ទឹក2
2
Fit the grip
Fit the grip
Cut a grip as long as the hand is wide and bore it through the centre to take No. 10 wire. Set it between the two halves at the right height for the arm, run the wire through both halves and the grip, and rivet it over (Fig. 2).
សម្ភារៈសម្រាប់ជំហាននេះ៖
ស្នៀតឈើរឹង1 grip
លួសដែកទាញ1 No. 10ឧបករណ៍ដែលត្រូវការ៖
រណារដៃ
ស្វាន់ដៃវិលមានក្បាល
កន្ត្រៃកាត់សន្លឹកលោហៈ
ញញួរ3
3
Nail on the top piece
Nail on the top piece
Cut a top piece shaped as at A, Fig. 3, and nail it across the upper ends of the two halves.
សម្ភារៈសម្រាប់ជំហាននេះ៖
ក្តារឈើស្រល់1 top piece
ដែកគោល1 ដុំឧបករណ៍ដែលត្រូវការ៖
រណារដៃ
ញញួរសម្ភារៈ
5- 1 broom handleកន្លែងទុក
- 1 gripកន្លែងទុក
- 1 No. 10កន្លែងទុក
- 1 top pieceកន្លែងទុក
- 1 ដុំកន្លែងទុក
ប្លង់នេះធ្វើ
CC0 សាធារណៈ
ប្លង់នេះត្រូវបានចេញផ្សាយក្រោម CC0។ អ្នកមានសិទ្ធិចម្លង កែប្រែ ចែកចាយ និងប្រើប្រាស់ដោយមិនចាំបាច់សុំអនុញ្ញាត។
គាំទ្រអ្នកបង្កើតដោយទិញផលិតផលតាមរយៈប្លង់របស់ពួកគេ ដែលពួកគេទទួលបាន កម្រៃជើងសារអ្នកបង្កើត កំណត់ដោយអ្នកលក់ ឬបង្កើតកំណែថ្មីនៃប្លង់នេះ ហើយបញ្ចូលជាការតភ្ជាប់ក្នុងប្លង់របស់អ្នកដើម្បីចែករំលែកចំណូល។
